3MTM DIN R-Form Plug .100" Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series * Early mate late break (EMLB) grounding contacts for hot swapping * Select load capability * Expanded pin counts * Optional press-fit or solder tail termination * Optional retention clips * Mates with R-form and C-form sockets * See Regulatory Information Appendix (RIA) for chemical compliance information Physical TS-1133-D Sheet 1 of 4 C R ec e ON p h la T S c IN he e U d et b ED y 23 07 Date Modified: February 20, 2008 Insulation: Material: Glass Filled Polyester (PCT) Flammability: UL 94V-0 Color: Gray or Black Contact: Material: Copper Alloy Plating: Underplating: 50 " [ 1.27 m ] Min. Nickel Wiping Area: (See Ordering Information) Termination Area: (See Ordering Information) IS Marking: Part Number and Date Code Electrical D Contact Resistance: Current Rating: Insulation Resistance: Withstanding Voltage: Environmental 20 m Max. 3.0 A @ 30C T-rise above ambient 1 x 10 M min. at 500 VDC 1 x 10 VAC for 1 minute T Temperature Rating: -55C to +125C Temperature Rating: 260C per J-STD-020C Moisture Sensitivity Level: 1 (per J-STD-020C) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN R-Form Plug .100" Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series A D POSITION A1 B .200 5.08 .437 11.10 .100 2.54 C R ec e ON p h la T S c IN he e U d et b ED y 23 07 .343 8.71 PRESS-FIT OR SOLDER TAIL .205 5.21 .457 11.61 C C TAIL LENGTH .195 4.95 S1 MATE LENGTH .160 [4.06] S110 MATE LENGTH WITH OR WITHOUT RETENTION CLIP E FOR SPECIAL PIN ARRANGEMENTS CONTACT 3M SALES REPRESENTATIVES .150 3.80 D IS .200 5.08 Au FINISH Inch [mm] Tolerance Unless Noted Feed Thru/Wire Wrap W, DPWI and DPW2 with plating finish selected from Table 3, with precious metal plated on both ends. Inch .0 .00 .000 .1 .01 .005 [ ] Dimensions for Reference only Ordering Information DIN - XXX RPX - XXXX - XXXX T Contact Quantity See Table Contact Loading Pattern: A = A Row only B = Rows A & C Filled C = Rows A, B, & C Filled D = Rows A & B Filled E = B Row only Plating and Insulator Color Options: See Table 3 Termination Options: See Table 2 TS-1133-D Sheet of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN R-Form Plug .100" Inverse Mount, Vertical, Solder Tail or Press-Fit Termination Load Pattern A 016 032 048 032 016 032 064 096 064 032 040 080 120 080 040 050 A B C D E A B C D E A B C D E A 2.140 [54.36] 2.140 [54.36] 2.140 [54.36] 2.140 [54.36] 2.140 [54.36] 3.740 [95.00] 3.740 [95.00] 3.740 [95.00] 3.740 [95.00] 3.740 [95.00] 4.540 [115.32] 4.540 [115.32] 4.540 [115.32] 4.540 [115.32] 4.540 [115.32] 5.540 [140.72] B C D E 5.540 5.540 5.540 5.540 100 150 100 050 Table 1 B D E 1.754 [44.55] 1.754 [44.55] 1.754 [44.55] 1.754 [44.55] 1.754 [44.55] 3.354 [85.19] 3.354 [85.19] 3.354 [85.19] 3.354 [85.19] 3.354 [85.19] 4.154 [105.51] 4.154 [105.51] 4.154 [105.51] 4.154 [105.51] 4.154 [105.51] 5.154 [130.91] 1.943 [49.35] 1.943 [49.35] 1.943 [49.35] 1.943 [49.35] 1.943 [49.35] 3.543 [89.99] 3.543 [89.99] 3.543 [89.99] 3.543 [89.99] 3.543 [89.99] 4.343 [110.31] 4.343 [110.31] 4.343 [110.31] 4.343 [110.31] 4.343 [110.31] 5.343 [135.71] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 1.500 [38.10] 3.100 [78.74] 3.100 [78.74] 3.100 [78.74] 3.100 [78.74] 3.100 [78.74] 3.900 [99.06] 3.900 [99.06] 3.900 [99.06] 3.900 [99.06] 3.900 [99.06] 4.900 [124.46] 5.154 5.154 5.154 5.154 5.343 5.343 5.343 5.343 4.900 4.900 4.900 4.900 C R ec e ON p h la T S c IN he e U d et b ED y 23 07 Contact Quantity DIN 41612 Series [140.72] [140.72] [140.72] [140.72] [130.91] [130.91] [130.91] [130.91] [135.71] [135.71] [135.71] [135.71] [124.46] [124.46] [124.46] [124.46] Table 2 Solder Termination Option No R1 S1 S110 W Press-fit Termination Option No DPS DPW1 DPW2 Plating Suffix RR HM 0.189 (4.80) 0.512 (13.00) 0.669 (16.99) Press-Fit Terminations Table 3 Solder Tail Terminations Gray (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.76 m [30 "] Min. Au Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over Gray (RIA E2 & C2 apply) (RIA E3 & C2 apply) 0.08 m [3 "] Min. Au Contact Area 0.18 m [7 "] Min. PdNi Contact Area 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over Gray (RIA E2 & C2 apply) N/A Gray (RIA E1 & C1 apply) T D TR N/A Black (RIA E1 & C1 apply) (RIA E1 & C1 apply) HS Black (RIA E1 & C1 apply) (RIA E1 & C1 apply) KT Black (RIA E1 & C1 apply) (RIA E1 & C1 apply) MH Comments with retention clips Insulator Color IS TG30 DIM "C" in (mm) 0.157 (3.99) 0.157 (3.99) 0.110 (2.79) 0.512 (13.00) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ Plating Composition 0.08 m [3 "] Min. Au over 0.18 m [7 "] Min. PdNi Contact Area (each end) 2.54 m [100 "] Min. SnPb Term. Area 1.27 m [50 "] Min. Ni all over 0.08 m{3 "] Min. Au over 0.18 m [7 "] Min. PdNi Contact Area 5.08 m [200 "] Min. RoHS Compliant Whisker Mitigating Matte Sn Term. Area 1.27 m [50 "] Min. Ni all over 0.76 m [30 "] Min. Au Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over 0.08 m [3 "] Min. Au over 0.18 m [7 "] Min. PdNi Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over 0.25 m [10 "] Min. Au Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over TS-1133-D Sheet of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN R-Form Plug .100" Inverse Mount, Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series -CD E .012 .30 .100 2.54 TYP. C R ec e ON p h la T S c IN he e U d et b ED y 23 07 C B A -B.200 5.08 1 O lO .100 2.54 2 X .110 2.79 O F .100 2.54 PLATED THRU HOLE l O 0.004 M A B C 0.006 M A B C -A- RECOMMENDED MOUNTING HOLE PATTERN Hole Plating Table For TG, TR, RR (Press-Fit Leads) Hole Drilled Hole Dia. In (mm) "F" Cu Thickness in (mm) SnPb Thickness in (m) Finished Dia. In (mm) 0.037 - 0.043 (0.94 - 1.09) Hole Plating Table For TG, TR, RR (Solder Tail Leads) Hole "F" IS "F" Drilled Hole Dia. In (mm) D Hole Cu Thickness in (mm) SnPb Thickness in (m) Finished Dia. In (mm) 0.041 - 0.049 (1.04 - 1.24) Hole Plating Table For MH, HS, KT (Press-Fit Leads) Drilled Hole Dia. In (mm) Cu Thickness in (mm) Immersion Whisker Mitigating Matte Sn Thickness in (m) Finished Dia. In (mm) 0.0425-0.044 (1.080-1.118) #57 OR 1.10mm Twist Drill 0.0010 - 0.0020 (0.025 - 0.045) 20 - 100 (0.508 - 2.54) 0.037 - 0.043 (0.94 - 1.09) Hole "F" T Hole Plating Table For MH, HS, KT (Solder Tail Leads) Drilled Hole Dia. In (mm) Cu Thickness in (mm) Immersion Matte Sn Thickness in (m)) Finished Dia. In (mm) 0.041 - 0.049 (1.04 - 1.24) TS-1133-D Sheet of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS C R ec e ON p h la T S c IN he e U d et b ED y 23 07 Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. IS Appendix E3: European Union RoHS D Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. T Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-D Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. C R ec e ON p h la T S c IN he e U d et b ED y 23 07 In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS D IS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. T The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-D Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. D IS C R ec e ON p h la T S c IN he e U d et b ED y 23 07 The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Important Notice T All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2008. All rights reserved. RIA-2217B-D 3M is a trademark of 3M Company.