Two-Piece Grounding Connectors for Shielded and Coaxial Cable A reliable method for grounding, terminating and insulating shielded and coaxial cable All-around hex compression is applied with a simple tool. The result: a permanent, compression joint. With or without grounding wire (insertable from front or back), reliable grounding of termination is done quickly, neatly, and accurately. The Thomas & Betts hex compression is a permanent method which has reliably connected literally hundreds of millions of installations in communications, aerospace, electronic, telephone, radio and TV. The termination is completed quickly, neatly, accurately ... at a greatly reduced production cost. Installation Method 1. Slip outer sleeve over insulation jacket, after stripping. Trim braid to within 1/2" of insulation. 2. Fan braid by rotating center conductor and slip inner sleeve under braid. 3. Position inner sleeve to extend about 1/16" beyond braid. 4. Slip one No. 22 or No. 20 ground wire under outer sleeve (front or back), and slide outer sleeve over braid. For Daisy chain grounding, two ground wires can be accommodated by selecting the proper size outer sleeve. 5. Outer sleeve covers all exposed strands. 6. Compress in specified tool. (Tool will not release until full compression stroke is completed.) Warning: Never install on energized wire. 229 Two-Piece Grounding Connectors for Shielded and Coaxial Cable O.D. Inner Insulation O.D. Inner Insulation Determine O.D. of inner conductor insulation with measuring tool. Inner Sleeve-Cat. GSB Hard bronze inner sleeve is installed under braid. Length 5/16" Tin Plated as standard. Connector Inner Sleeve Cat. No. Colour Code I.D. O.D. Military Spec. No. GSB-046 GSB-058 GSB-063 GSB-071 GSB-080 GSB-090 GSB-096 GSB-101 GSB-109 GSB-115 GSB-124 GSB-128 GSB-134 GSB-149 GSB-156 GSB-165 GSB-175 GSB-187 GSB-194 GSB-205 GSB-219 GSB-225 GSB-232 GSB-250 GSB-261 GSB-266 GSB-275 GSB-281 GSB-287 GSB-297 GSB-312 GSB-348 GSB-375 Tin Yellow Red Green Blue Orange Purple Yellow Red Tin Green Tin Orange Blue Red Tin Green Yellow Blue Orange Tin Yellow Red Green Blue Tin Orange Yellow Tin Red Purple Orange Blue .046 .058 .063 .071 .080 .090 .096 .101 .109 .115 .124 .128 .134 .149 .156 .165 .175 .187 .194 .205 .219 .225 .232 .250 .261 .266 .275 .281 .287 .297 .312 .348 .375 .075 .083 .088 .096 .103 .113 .119 .124 .131 .146 .145 .152 .156 .179 .193 .194 .215 .227 .226 .245 .250 .256 .263 .281 .297 .297 .306 .331 .327 .335 .362 .400 .406 21981-046 21981-058 21981-063 21981-071 21981-080 21981-090 21981-096 21981-101 21981-109 21981-115 21981-124 21981-128 21981-134 21981-149 21981-156 21981-165 21981-175 21981-187 21981-194 21981-205 21981-219 21981-225 21981-232 21981-250 21981-261 21981-266 21981-275 21981-281 21981-287 21981-297 21981-312 21981-348 21981-375 Inner sleeve 1. Use a measuring tool over the inner conductor insulation. Rotate wire to pick up high spots on cable that are non-symmetrical. 2. Add .005 to the diameter of the conductor insulation. Select inner sleeve with this I.D. or nearest larger I.D. 230 Two-Piece Grounding Connectors for Shielded and Coaxial Cable Non-insulated Outer Sleeve-Cat. GSC Connector Outer Sleeves Cat. No. Soft bronze outer sleeve slips over the braid and ground wire. Length 1/4" Insulated Outer Sleeve-Cat. GSR Soft bronze outer sleeve with nylon insulator slips over the braid and ground wire. Colour Code I.D. O.D. Non-insulated GSC-101 GSC-128 GSC-149 GSC-156 GSC-175 GSC-187 GSC-194 GSC-199 GSC-205 GSC-219 GSC-225 GSC-232 GSC-261 GSC-275 GSC-281 GSC-287 GSC-297 GSC-312 GSC-327 GSC-348 GSC-359 GSC-375 GSC-405 GSC-415 GSC-425 GSC-460 GSC-500 Tin Blue Purple Yellow Blue Orange Red Tin Yellow Green Purple Orange Yellow Tin Purple Blue Green Yellow Tin Orange Purple Yellow Red Blue Tin Tin Green .101 .128 .149 .156 .175 .187 .194 .199 .205 .219 .225 .232 .261 .275 .281 .287 .297 .312 .327 .348 .359 .375 .405 .415 .425 .460 .500 .124 .152 .179 .193 .215 .227 .226 .235 .245 .250 .256 .263 .297 .306 .331 .327 .335 .362 .372 .393 .399 .406 .453 .463 .475 .510 .550 21980-101 21980-128 21980-149 21980-156 21980-175 21980-187 21980-194 21980-199 21980-205 21980-219 21980-225 21980-232 21980-261 21980-275 21980-281 21980-287 21980-297 21980-312 21980-327 21980-348 21980-359 21980-375 21980-405 21980-415 Insulated GSR-101 GSR-128 GSR-149 GSR-156 GSR-175 GSR-187 GSR-194 GSR-199 GSR-205 GSR-219 GSR-225 GSR-232 GSR-261 GSR-275 GSR-281 GSR-287 GSR-297 GSR-312 GSR-327 GSR-348 GSR-359 GSR-375 GSR-405 GSR-415 GSR-460 GSR-500 Tin Blue Purple Yellow Blue Orange Red Tin Yellow Green Purple Orange Yellow Tin Purple Blue Green Yellow Tin Orange Purple Yellow Red Blue Tin Green .101 .128 .149 .156 .175 .187 .194 .199 .205 .219 .225 .232 .261 .275 .281 .287 .297 .312 .327 .348 .359 .375 .405 .415 .460 .500 .124 .152 .179 .193 .215 .227 .226 .235 .245 .250 .256 .263 .297 .306 .331 .327 .335 .362 .372 .393 .399 .406 .453 .463 .510 .550 18121-101 18121-128 18121-149 18121-156 18121-175 18121-187 18121-194 18121-199 18121-205 18121-219 18121-225 18121-232 18121-261 18121-275 18121-281 18121-287 18121-297 18121-312 18121-327 18121-348 18121-359 18121-375 18121-405 18121-415 18121-460 18121-500 Outer sleeve 1. Add .060 to O.D. of inner sleeve selected. Use this dimension to select outer sleeve with this I.D. or the nearest larger I.D. 2. Use GSC prefix to order non-insulated outer sleeve. Use GSR prefix to order nylon insulated outer sleeve. Note: All parts are standard tin plated per MIL-T-10727A Note: Inner and outer connector catalogue nos. conform to MIL-F-21608. Military Spec. No. 21980-460 21980-500 These suffixes are NOT colour-coded. They are not stock items. Add suffix PF for plain finish. Add suffix T for tin plate with no colour code. Add suffix NP for nickel plate. Consult regional sales office for delivery and minimum quantities. 231