2SB1131 Ordering number : ENN2420C PNP Epitaxial Planar Silicon Transistor 2SB1131 Flash, High-Current Switching Applications Applications * Flash, power supplies, relay drivers, lamp drivers. Features * * * * Adoption of FBET, MBIT processes. Low saturation voltage. Large current capacity. High-speed switching. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit --25 V Collector-to-Emitter Voltage VCBO VCEO --20 V Emitter-to-Base Voltage VEBO --5 V IC --5 A Collector Current (Pulse) ICP --8 A Collector Dissipation PC 1 W 150 C --55 to +150 C Collector Current Junction Temperature Tj Storage Temperature Tstg Electrical Characteristics at Ta=25C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=--20V, IE=0 --500 nA Emitter Cutoff Current IEBO hFE1 VEB=--4V, IC=0 --500 nA VCE=--2V, IC=--500mA hFE2 VCE=--2V, IC=--4A DC Current Gain Gain-Bandwidth Product fT 100* 400* 60 VCE=--5V, IC=--200mA * : The 2SB1131 is classified by 500mA hFE as follows : 320 MHz Continued on next page. Rank R S T hFE 100 to 200 140 to 280 200 to 400 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 32505TN (PC)/O2003TN (KOTO)/92098HA (KT)/8270MH/521TA, TS No.2420-1/4 2SB1131 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Output Capacitance VCE(sat) VBE(sat) IC=--3A, IB=--60mA IC=--3A, IB=--60mA Cob VCB=--10V, f=1MHz IC=(--)10A, IE=0 Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage Turn-ON Time V(BR)EBO ton Storage Time Fall Time Ratings Conditions min Unit max --250 --500 --1.0 --1.3 mV V 60 IC=(--)1mA, RBE= IE=(--)10A, IC=0 pF --25 V --20 V --5 V See specified Test Circuit. 40 ns tstg See specified Test Circuit. 200 ns tf See specified Test Circuit. 10 ns Package Dimensions unit : mm 2006C Switching Time Test Circuit IB1 PW=20s D.C.1% 4.7 6.0 5.0 typ INPUT OUTPUT IB2 RB RL 5 8.5 VR 50 VBE= --5V 14.0 1.0 0.5 1 : Emitter 2 : Collector 3 : Base IC -- VCE From top --100mA --90mA --80mA --70mA --60mA --50mA --3 IC -- VCE --2.0 A --10m A m --12 40mA -- --1.6 --30mA --20mA --6mA --1.2 --10mA --2 --8mA Collector Current, IC - A Collector Current, IC - A SANYO : MP 1.45 --5 --4 VCC=10V IC=10IB1= --10IB2=2A 1 2 3 1.45 + 470F + 100F 3.0 0.5 0.6 0.5 --4mA --0.8 --1 --2mA --0.4 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE - V IB=0 0 --1.0 ITR08956 0 --1 --2 --3 --4 --5 Collector-to-Emitter Voltage, VCE - V --6 ITR08957 No.2420-2/4 2SB1131 hFE -- IC 1000 VCE= --2V Gain-Bandwidth Product, fT - MHz 7 DC Current Gain, hFE 5 f T -- IC 2 VCE= --5V 1000 3 2 100 7 5 3 2 7 5 3 2 100 7 5 3 2 10 5 --0.01 2 3 5 --0.1 2 3 5 2 --1.0 3 Collector Current, IC - A 5 --10 ITR08958 Cob -- VCB 5 2 3 5 --0.1 2 3 5 --1.0 2 3 5 --10 ITR08959 2 3 5 --10 ITR08961 VCE(sat) -- IC --1000 f=1MHz 7 3 2 100 7 5 3 5 3 2 --100 7 5 =50 IC / IB 3 2 20 10 --10 7 5 3 2 3 5 7 2 --1.0 3 5 7 2 --10 Collector-to-Base Voltage, VCB -- V 5 3 2 3 5 5 3 2 --1.0 IC / IB=50 3 5 --1.0 ASO ICP=-8A IC=-5A 10 10m 0m s s s Collector Current, IC - A 5 2 1m --10 --0.1 Collector Current, IC - A 2 7 7 --0.01 ITR08960 VBE(sat) -- IC --10 Base-to-Emitter Saturation Voltage, VBE (sat) - V --0.01 Collector Current, IC - A Collector-to-Emitter Saturation Voltage, VCE (sat) - mV Output Capacitance, Cob -- pF 5 3 2 DC --1.0 op era 5 tio n 3 2 --0.1 5 5 3 5 --0.01 2 3 5 --0.1 2 3 5 --1.0 Collector Current, IC - A 2 3 5 --10 ITR08962 Ta=25C Single pulse 3 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector-to-Emitter Voltage, VCE - V 2 3 ITR08963 PC -- Ta 1.2 Collector Dissipation, PC - W 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 ITR08964 No.2420-3/4 2SB1131 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2005. Specifications and information herein are subject to change without notice. PS No.2420-4/4