DATA SHEET SMV114x Series: Hyperabrupt Junction Tuning Varactors Applications High volume commercial systems Features Frequency linear design Low series resistance Packages rated MSL1, 260 C per JEDEC J-STD-020 Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances) compliant packaging. Description The SMV114x series of silicon hyperabrupt junction varactor diodes is specifically designed with an increasing gamma versus voltage characteristic. This results in improved Voltage-Controlled Oscillator (VCO) frequency-voltage linearity compared to a conventional hyperabrupt junction varactor. The SMV114x family of varactors is characterized for capacitance and resistance over temperature. Table 1 describes the various packages and markings of theSMV114x varactors. Table 1. Packaging and Marking Single Single SC-79 SOD-323 SMV1142-011LF Marking: GU SMV-1143-011LF Marking: GV SMV-1144-011LF Marking: GW SMV1145-079LF Marking: Cathode SMV1145-011LF Marking: GA SMV1147-079LF Marking: Cathode SMV1147-011LF Marking: GY SMV1148-011LF Marking: GZ LS = 0.7 nH LS = 1.5 nH LF denotes lead (Pb)-free, RoHS-compliant packaging option as an alternative to the standard Skyworks tin/lead (Sn/Pb) packaging. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200056G * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * September 9, 2009 1 DATA SHEET * SMV114x VARACTORS Table 2. SMV114x Absolute Maximum Ratings Parameter Symbol Minimum Typical Maximum Units 12 V Reverse voltage VR Forward current IF 20 mA Power dissipation PDIS 250 mW Operating temperature TOP -55 +125 C Storage temperature TSTG -55 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The SMV114x varactors are Class 0 Human Body Model (HBM) ESD devices. Table 3. SMV114x Electrical Specifications (Note 1) (Note 2) (TOP = 25 C, Unless Otherwise Noted) Part Number CT @ 1 V (pF) Minimum CT @ 3 V (pF) CT @ 6 V (pF) Typical Typical Maximum CT @ 1 V CT @ 3 V Ratio (pF) Minimum Maximum CT @ 1 V CT @ 6 V Ratio (pF) Minimum Maximum RS @ 3 V, 500 MHz () Q @ 3 V, 50 MHz Maximum Typical SMV1142 8.20 10.0 5.80 3.50 1.50 1.65 2.43 2.93 0.70 800 SMV1143 11.60 14.2 8.20 4.90 1.50 1.65 2.45 2.95 0.65 600 SMV1144 14.65 17.95 10.4 6.10 1.50 1.65 2.46 2.96 0.65 500 SMV1145 25.50 31.2 18.1 10.6 1.50 1.65 2.50 3.00 0.60 300 SMV1147 54.60 66.7 38.6 22.6 1.50 1.65 2.50 3.00 0.55 150 SMV1148 62.00 76.0 44.1 25.2 1.50 1.65 2.50 3.00 0.50 150 Note 1: Performance is guaranteed only under the conditions listed in this Table and is not guaranteed over the full operating or storage temperature ranges. Operation at elevated temperatures may reduce reliability of the device. Note 2: Reverse voltage, VR (IR = 10 A): 12 V minimum. Reverse current, IR (VR = 9.6 V): 20 nA maximum. Electrical and Mechanical Specifications The absolute maximum ratings of the SMV114x varactors are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics for the SMV114x varactors are illustrated in Figures 1 through 4. Table 4 summarizes the capacitance of the SMV114x series for reverse voltages between 0 and 12 V. The SPICE model for the SMV114x varactor series is shown in Figure 5 and the associated model parameters are provided in Table 5. Package dimensions, and tape and reel drawings are provided in Figures 6 through 9. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SMV114x varactors are rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. They can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164 Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. For packaging details, refer to the Skyworks Application Note Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation, document number 200083. Package and Handling Information Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 September 9, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200132E DATA SHEET * SMV114x VARACTORS Typical Performance Characteristics 0.8 SMV1148 SMV1142 SMV1143 SMV1147 RS () Capacitance (pF) 100.0 10.0 SMV1144 0.6 SMV1145 SMV1145 SMV1147 SMV1144 SMV1143 SMV1148 SMV1142 0.4 1.0 0 2.0 4.0 6.0 0 8.0 1 3 4 5 Reverse Voltage (V) Reverse Voltage (V) Figure 2. Series Resistance vs Reverse Voltage @ 500 MHz Figure 1. Capacitance vs Reverse Voltage +5 +12 +10 +4 VR = 1 V +3 +2 +1 VR = 4 V 0 -1 -2 Percentage Change (%) Percentage Change (%) 2 +8 +6 +4 +2 0 -2 -4 -6 -3 -8 -40 -20 0 +20 +40 +60 +80 Temperature (C) Figure 3. Relative Capacitance Change vs Temperature -40 -20 0 +20 +40 +60 +80 Temperature (C) Figure 4. Relative Series Resistance Change vs Temperature Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200056G * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * September 9, 2009 3 DATA SHEET * SMV114x VARACTORS Table 4. Capacitance vs Reverse Voltage CT (pF) VR (V) SMV1142 SMV1143 SMV1144 SMV1145 SMV1147 SMV1148 0 13.38 18.99 24.01 41.81 89.52 104.71 0.5 10.70 15.18 19.18 33.38 71.44 83.27 1.0 9.10 12.90 16.30 28.35 60.65 70.48 1.5 7.98 11.30 14.28 24.82 53.07 61.48 2.0 7.12 10.08 12.73 22.11 47.27 54.56 2.5 6.42 9.08 11.46 19.91 42.55 48.92 3.0 5.83 8.24 10.40 18.06 38.58 44.13 3.5 5.32 7.51 9.48 16.45 35.12 39.97 4.0 4.86 6.87 8.66 15.02 32.06 36.29 4.5 4.45 6.29 7.93 13.73 29.31 32.99 5.0 4.09 5.76 7.26 12.57 26.81 30.03 5.5 3.75 5.29 6.66 11.53 24.57 27.43 6.0 3.46 4.87 6.13 10.60 22.58 25.22 6.5 3.21 4.51 5.68 9.81 20.89 23.43 7.0 3.00 4.22 5.31 9.17 19.52 22.06 7.5 2.84 3.99 5.02 8.66 18.43 21.01 8.0 2.72 3.82 4.80 8.29 17.63 20.22 8.5 2.63 3.69 4.63 7.99 16.98 19.61 9.0 2.56 3.58 4.50 7.76 16.50 19.12 9.5 2.50 3.50 4.40 7.58 16.10 18.72 10.0 2.45 3.43 4.31 7.43 15.78 18.38 10.5 2.41 3.37 4.24 7.30 15.50 18.11 11.0 2.36 3.31 4.15 7.15 15.18 17.87 11.5 2.35 3.28 4.15 7.10 15.08 17.65 12.0 2.32 3.25 4.08 7.02 14.90 17.43 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 September 9, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200132E DATA SHEET * SMV114x VARACTORS PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 PORT P_Cathode port = 2 FC = 0.5 BV = 0 IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 S1672 Figure 5. SPICE Model Table 5. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS () SMV1142 13.38 2.20 1.00 0 0.70 SMV1143 18.99 2.20 1.00 0 0.65 SMV1144 24.01 2.20 1.00 0 0.65 SMV1145 41.80 2.50 1.10 0 0.60 SMV1147 89.52 2.50 1.10 0 0.55 SMV1148 104.70 2.25 1.10 0 0.50 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200056G * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * September 9, 2009 5 DATA SHEET * SMV114x VARACTORS Cathode Indicator 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 0.006 (0.15 mm) Min. 1 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 2 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 10 Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 10 Max. Dimensions are in inches (millimeters shown in parentheses) S1652 Figure 6. SC-79 Package Dimensions 1.50 0.10 4.00 0.10 4.00 0.10 2.00 0.05 0.229 0.02 (T) B 1.75 0.10 A B Cathode Indicator 0.80 0.05 (Ko) B 8.00 0.20 A 3.50 0.05 1.40 0.05 1.95 0.05 (Bo) 2o Max 0.50 0.05 0.39 0.05 2o Max 0.90 0.05 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. All measurements are in millimeters. S1673 Figure 7. SC-79 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 September 9, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200132E DATA SHEET * SMV114x VARACTORS 0.063 (1.60 mm) Min. 0.071 (1.80 mm) Max. 0.090 (2.30 mm) Min. 0.108 (2.74 mm) Max. 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 1 2 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. Cathode Indicator 0.050 (1.25 mm) Max. 0.008 (0.20 mm) Nom. 0.008 (0.20 mm) Nom. 0.006 (0.15 mm) Typ. 0.008 (0.20 mm) Nom. Dimensions are in inches (millimeters shown in parentheses) S1619 Figure 8. SOD-323 Package Dimensions 4.00 0.10 4.00 0.10 1.50 0.10 2.00 0.05 B A A B 8.00 +0.30/-0.10 3.50 0.05 1.75 0.10 Cathode Indicator 1.00 0.25 1.78 0.81 0.254 0.13 1.09 8o Max 5o Max 1.35 0.10 (Ko) 1.45 0.10 3.20 0.10 A B Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. Tolerance (.xx) = 0.10 4. All measurements are in millimeters. S1674 Figure 9. SOD-323 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200056G * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * September 9, 2009 7 DATA SHEET * SMV114x VARACTORS Copyright (c) 2002-2009 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 8 September 9, 2009 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200132E