10TTS08S - International Rectifier

SURFACE MOUNTABLE

PHASE CONTROL SCR

Preliminary Data Sheet I2145 12/97

SAFE

Series

10TTS08S

VT< 1.15V @ 6.5A

ITSM = 140A

RRM = 800V

Major Ratings and Characteristics

D2 PAK (SMD-220)

IT(AV) Sinusoidal 6.5 A

waveform

IRMS 10 A

VRRM/

VDRM 800 V

ITSM 140 A

VT@ 6.5 A, TJ = 25°C 1.15 V

dv/dt 150 V/µs

di/dt 100 A/µs

TJrange - 40 to 125 °C

Characteristics 10TTS08S Units

Output Current in Typical Applications

TA = 55°C, TJ = 125°C, footprint 300mm2

NEMA FR-4 or G10 glass fabric-based epoxy 2.5 3.5

with 4 oz (140µm) copper

Aluminum IMS, RthCA = 15°C/W 6.3 9.5 A

Aluminum IMS with heatsink, RthCA = 5°C/W 14.0 18.5

Applications Single-phase Bridge Three-phase Bridge Units

Description/Features

The 10TTS08S SAFE

series of silicon

controlled rectifiers are specifically designed for

medium power switching and phase control

applications. The glass passivation technology

used has reliable operation up to 125° C junction

temperature.

Typical applications are in input rectification (soft

start) and these products are designed to be used

with International Rectifier input diodes, switches

and output rectifiers which are available in identi-

cal package outlines.

Package Outline

10TTS08S SAFE

Series

Preliminary Data Sheet I2145 12/97

VRRM, maximum VDRM , maximum IRRM/IDRM

Part Number peak reverse voltage peak direct voltage 1 25°C

VVmA

10TTS08S 800 800 1.0

V oltage Ratings

IT(AV) Max. Average On-state Current 6.5 A @ TC = 112° C, 180° conduction half sine wave

IT(RMS) Max. RMS On-state Current 10

ITSM Max. Peak One Cycle Non-Repetitive 120 A 10ms Sine pulse, rated VRRM applied, TJ = 125°C

Surge Current 140 10ms Sine pulse, no voltage reapplied, TJ = 125°C

I2t Max. I2t for fusing 72 A2s 10ms Sine pulse, rated VRRM applied, TJ = 125°C

100 10ms Sine pulse, no voltage reapplied, TJ = 125°C

I2√t Max. I2√t for fusing 1000 A2√s t = 0.1 to 10ms, no voltage reapplied, TJ = 125°C

VTM Max. On-state Voltage Drop 1.15 V @ 6.5A, TJ = 25°C

rtOn-state slope resistance 17.3 mΩTJ = 125°C

VT(TO) Threshold Voltage 0.85 V

IRM/IDM Max.Reverse and Direct 0.05 mA TJ = 25 °C

Leakage Current 1.0 TJ = 125 °C

IHTyp. Holding Current 3 0 mA Anode Supply = 6V, Resistive load, Initial IT=1A

IL Max. Latching Current 5 0 mA Anode Supply = 6V, Resistive load

dv/dt Max. rate of rise of off-state Voltage 1 50 V/µs TJ = 25°C

di/dt Max. rate of rise of turned-on Current 100 A/µs

Absolute Maximum Ratings

Parameters 10TTS08S Units Conditions

VR = rated VRRM/ VDRM

10TTS08S SAFE

Series

Preliminary Data Sheet I2145 12/97

Triggering

PGM Max. peak Gate Power 8. 0 W

PG(AV) Max. average Gate Power 2.0

+ IGM Max. paek positive Gate Current 1. 5 A

- VGM Max. paek negative Gate Voltage 1 0 V

IGT Max. required DC Gate Current 2 0 mA Anode supply = 6V, resistive load, TJ = - 65°C

to trigger 1 5 Anode supply = 6V, resistive load, TJ = 25°C

1 0 Anode supply = 6V, resistive load, TJ = 125°C

VGT Max. required DC Gate Voltage 1.2 V Anode supply = 6V, resistive load, TJ = - 65°C

to trigger 1 Anode supply = 6V, resistive load, TJ = 25°C

0.7 Anode supply = 6V, resistive load, TJ = 125°C

VGD Max. DC Gate Voltage not to trigger 0.2 TJ = 125°C, V DRM = rated value

IGD Max. DC Gate Current not to trigger 0.1 mA TJ = 125°C, VDRM = rated value

Parameters 10TTS08S Units Conditions

Switching

Parameters 10TTS08S Units Conditions

tgt Typical turn-on time 0. 8 µs TJ = 25°C

trr Typical reverse recovery time 3 TJ = 125°C

tqTypical turn-off time 10 0

TJMax. Junction Temperature Range - 40 to 125 °C

Tstg Max. Storage Temperature Range - 40 to 125 °C

Soldering Temperature 240 °C for 10 seconds (1.6mm from case)

RthJC Max. Thermal Resistance Junction 1.5 °C/W DC operation

to Case

RthJA Typ. Thermal Resistance Junction 40 °C/W

to Ambient (PCB Mount)**

wt Approximate Weight 2 (0.07) g (oz.)

T Case Style D2 Pak (SMD-220)

Thermal-Mechanical Specifications

Parameters 10TTS08S Units Conditions

**When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W

For recommended footprint and soldering techniques refer to application note #AN-994

10TTS08S SAFE

Series

Preliminary Data Sheet I2145 12/97

Fig. 2 - Current Rating Characteristics

Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics

Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 7 - Maximum Non-Repetitive Surge Current

Fig. 1 - Current Rating Characteristics

105

110

115

120

125

01234567

30°60° 90° 120° 180°

Ma ximu m Al lowa b le Case Te mp er atu r e ( °C)

Conduction Angle

Average On-state Curr ent (A)

10TTS08

R (DC) = 1.5 K/W

thJC

105

110

115

120

125

024681012

30°60° 90°120° 180°

A verage On-state Current (A)

M ax imu m All owable C as e Te mperatu re ( °C)

Conduction Period

10TTS08

R (DC) = 1.5 K/W

thJC

01234567

RMS Limit

Con duct ion An g le

M ax imu m Av erage On - sta t e P ower Loss ( W)

Average On- state Curren t (A)

180°

120°

90°

60°

30°

10TTS08

T = 125°C

024681012

180°

120°

90°

60°

30°

RMS Limit

Conduction Per iod

Maximum Average On-state Power Loss (W)

Average On-state Current (A)

10TTS08

T = 125°C

100

110

120

130

110100

Number Of Equal Amplitude Half Cycle Current Pulses (N)

At Any Rated Load Co ndit ion And With

Rated V Applied Following Surge.

RRM

Pe ak Hal f Sine Wav e On-st a te Current ( A)

In iti a l T = 12 5 °C

@ 60 Hz 0. 0083 s

@ 50 Hz 0. 0100 s

10TTS08

100

110

120

130

140

150

0.01 0.1 1

Peak Half Sine Wa ve On-state C urr ent (A)

Pulse Train Duration (s)

Ma ximum Non R epetitive Surge Cu r ren t

V e rsus P u lse T r a in D u r a tion. Co ntr ol

Of Condu ction M a y Not Be Ma inta ined .

Initial T = 125°C

No Vo ltag e Reapplie d

Rated V Reapplied

RRM

10TTS08

10TTS08S SAFE

Series

Preliminary Data Sheet I2145 12/97

Fig. 7 - On-state Voltage Drop Characteristics

Fig. 8 - Thermal Impedance ZthJC Characteristics

100

1000

0.511.522.533.5

T = 25°C

Inst anta neous On -sta te Current (A )

Instantaneous On-st ate Voltage (V)

T = 125°C

10TTS08

0.01

0.1

0.0001 0.001 0.01 0.1 1

Squ are Wave Pul se Dura tion ( s)

St eady Sta te V alue

(DC Operati on)

Sin gle Pu lse

D = 0.50

D = 0.33

D = 0.25

D = 0.17

D = 0.08

thJC

Transient Thermal Im pedance Z (°C/W)

10TTS08

10TTS08S SAFE

Series

Preliminary Data Sheet I2145 12/97

9G3A

10TTS08S

9512

EXAMPLE: THIS IS AN 10TTS08S INTERNATIONAL

RECTIFIER LOGO PART NUMBER

Marking Information

DATE CODE (YYWW)

YY = YEAR

WW = WEEK

ASSEMBLY

LOT CODE

Tape & Reel Information

Dimensions in millimeters and inches

TRR

FEED DIRECT ION

TRL

F EED D IRECTION

10.90 (0.429)

10.70 (0.421) 16.10 (0.634)

15.90 (0.626)

1.75 (0.069)

1.25 (0.049)

1.85 (0.073)

1.65 (0.065)

4.10 (0.161)

3.90 (0.153)

1.60 (0.063)

1.50 (0.059)

DIA.

1.60 (0.063)

1.50 (0.059)

DIA.

11.60 (0.457)

11.40 (0.449)

15.42 (0.609)

15.22 (0.601)

4.72 (0.186)

4.52 (0.178)

24.30 (0.957)

23.90 (0.941)

0.368 (0.0145)

0.342 (0.0135)

360 (1 4.173)

DIA. MAX.

26.40 (1.039)

24.40 (0.961)

13.50 (0.532)

12.80 (0.504)DIA.

60 (2.3 62)

DIA. MIN.

SMD- 220 Tape & Reel

When ordering, indica te the part

number, part orientation, and the

quantit y. Q uantit ies are in multiples

of 800 pieces per reel for both

TRL and TRR.

(K) (G)

(A)

10TTS08S SAFE

Series

Preliminary Data Sheet I2145 12/97

Outline Table

(K) (G)

1 (K) Cathode

2 (A) Anode

3 (G) Gate (A)

10.1 6 (0.40)

REF.

8.89 (0.35)

4.57 (0.18)

4.32 (0.17)

0.61 (0.02) MAX.

5.08 (0 .20) REF.

1.32 (0.05)

1.22 (0.05)

6.47 (0.25)

6. 18 (0.24)

93°

REF.

2. 61 (0.10)

2. 32 (0.09)

5.28 (0.21)

4.78 (0.19)

4. 69 ( 0.18)

4.20 (0.16)

0.55 (0.02)

0.46 (0.02)

14. 73 (0.58)

15. 49 (0.61)

1.40 (0.055)

1.14 (0.045)

0.93 (0.37)

0. 69 ( 0.27)

2X 11.4 3 (0.45)

17.7 8 (0 .70)

8.89 (0.3 5)

3. 81 (0.15)

2.08 (0.08)

2. 54 ( 0. 10)

MINIMUM RECOMMENDED FOOTPRINT

10 T T S 08 S TRL

Device Code

1524

Ordering Information Table

1- Current Rating, RMS value

2- Circuit Configuration

T = Single Thyristor

3- Package

T = TO-220AC

4- Type of Silicon

S = Converter Grade

5- Voltage code: Code x 100 = VRRM

6- S = TO-220 D2Pak (SMD 220) Version

7- Tape and Reel Option

TRL = Left Reel

TRR = Right Orientation Reel

Dimensions in millimeters and inches

(G) 3

(A)

1 (K)

10TTS08S SAFE

Series

Preliminary Data Sheet I2145 12/97

WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A Tel: (310) 322-3331 Fax: (310) 322-3332

EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020 Fax: ++ 44 1883 733408

IR CANADA: 7231 Victoria Park Ave., Suite #201, Markham, Ontario L3R 2Z8 Tel: (905) 475 1897. Fax: (905) 475 8801

IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 Fax: ++ 49 6172 965933

IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 4510111 Fax: ++ 39 11 4510220

IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171 Tel: 81 3 3983 0086 Fax: 81 3 3983 0642

IR SOUTHEAST ASIA: 315 Outram Road, # 10-02 Tan Boon Liat Building, SINGAPORE 0316. Tel: 65 221 8371. Fax: 65 221 8372.

http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice 12/97