USA: 1-888-41-ASTEC Europe (UK): +44(0)1384-842211 Asia (HK): 852-2437-9662
188
SPECIAL FEATURES
•1MHz Fixed frequency
•100°C Baseplate operating temperature
(no derating)
•Low output ripple and noise
•Excellent transient response
•Safety isolated low voltage interface
with ALPTM linear control
•High reliability - over 1 million hours MTBF
•Wide input voltage range
•Parallelable with accurate current sharing
•Current and temperature monitoring
outputs
ENVIRONMENTAL
Operating temperature (baseplate):
-20°C to +100°C
Storage temperature: -40°C to +105°C
Overtemperature protection: 110°C typical
MTBF: > 1 million hours (50°C baseplate)
SAFETY
UL UL 1950 E132002
CSA CSA22.2-234 LR53982C
CSA22.2-950
VDE IED950 20396-3336-1005 & 1006
EN 60950
CE CEMark (LVD)
NOTES
Nominal values apply with sense pins
connected and other control
pins unconnected.
Specifications subject to change without
notice.
ELECTRICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Input
Input Range............................. 18 - 36V
or
36 - 72 VDC
or
90 - 200 VDC
or
180 - 400 VDC
Efficiency................................. 84% typical (5V @ 40A)
87% typical (12V @ 18A)
Control
Voltage Adjust ......................... 80 to 120% Vo linear programming
Enable..................................... TTL compatible (low to enable)
Current Limit Adjust................. 20 to 100% Io linear programming
Clock Input (external sync)...... 3.3 to 5.5Vp-p @ 1MHz ± 10%
Clock Output (internal clock) ... 4.5Vp-p typical@ 1MHz ± 0.5%
Power Good/ Identification ...... High (Vo) = power good
Temperature Monitor Output ... 10 mV/°K (2.73V = 0°C)
Current Monitor Output ........... 0 to 1mA (1 mA = 100% Io rated)
Over Voltage
Protection Adjust ..................... 110 to 150% Vo linear programming by
voltage or resistor
Output
Load Regulation ...................... 0.1% typical down to no load
Line Regulation ....................... 0.02% typical
Noise/Ripple............................ 50 mV typical (output below 5V)
1% typical (output 5V and over)
Remote sense ......................... Up to 0.5V
Output Voltage Adjust Range .. ±20% of nominal
Transient Response ................ 3% typical deviation with 300µs recovery
(25-75% full load)
Current Share Accuracy.......... 3% typical
Overvoltage Protection............ 115% Vo (nominal)
Current Limit............................ 110% Io maximum
AM80A
240 Watts
AM80A Performance Series
Input V oltages
24V or 48V or
150V or 300V
# of Outputs
Single
Total Power
240 Watts