SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 - DECEMBER 1976 - REVISED MAY 1990 D OR P PACKAGE (TOP VIEW) PERIPHERAL DRIVERS FOR HIGH-VOLTAGE HIGH-CURRENT DRIVER APPLICATIONS D D D D D D D D Characterized for Use to 300 mA High-Voltage Outputs No Output Latch-Up at 55 V (After Conducting 300 mA) Medium-Speed Switching Circuit Flexibility for Varied Applications and Choice of Logic Function TTL-Compatible Diode-Clamped Inputs Standard Supply Voltages Plastic DIP (P) With Copper Lead Frame Provides Cooler Operation and Improved Reliability 1A 1B 1Y GND 1 8 2 7 3 6 4 5 VCC 2B 2A 2Y SUMMARY OF SERIES SN75471 DEVICE LOGIC OF PACKAGES COMPLETE CIRCUIT SN75471 SN75472 SN75473 AND NAND OR D, P D, P D, P description Series SN75471 dual peripheral drivers are functionally interchangeable with series SN75451B and series SN75461 peripheral drivers, but are designed for use in systems that require higher breakdown voltages than either of those series can provide at the expense of slightly slower switching speeds than series 75451B (limits are the same as series SN75461). Typical applications include high-speed logic buffers, power drivers, relay drivers, lamp drivers, MOS drivers, line drivers, and memory drivers. The SN75471, SN75472, and SN75473 are dual peripheral AND, NAND, and OR drivers, respectively, (assuming positive logic), with the output of the logic gates internally connected to the bases of the npn output transistors. Series SN75471 drivers are characterized for operation from 0C to 70C. Copyright 1990, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 - DECEMBER 1976 - REVISED MAY 1990 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Inter-emitter voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Off-state output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 V Continuous collector or output current (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mA Peak collector or output current (tw 10 ms, duty cycle 50%, see Note 3) . . . . . . . . . . . . . . . . . . . . . 500 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C NOTES: 1. Voltage values are with respect to the network GND, unless otherwise specified. 2. This is the voltage between two emitters, A and B. 3. Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within the continuous dissipation rating. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING D 725 mW 5.8 mW/C 464 mW P 1000 mW 8.0 mW/C 640 mW recommended operating conditions Supply voltage, VCC High-level input voltage, VIH MIN NOM MAX UNIT 4.75 5 5.25 V 2 Low-level input voltage, VIL Operating free-air temperature, TA 2 0 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 V 0.8 V 70 C SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 - DECEMBER 1976 - REVISED MAY 1990 logic symbol 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 1Y 5 7 2Y 5 6 2A 4 This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. A B L L (on state) L H L (on state) H L L (on state) H H H (off state) GND SN75471 schematic (each driver) VCC Y L 2Y 7 2B SN75471 FUNCTION TABLE (each driver) 1Y 2 1B 6 3 1 1A 4 k 1.6 k 130 Y A positive logic: Y = AB or A + B B 500 1 k GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range SN75471 PARAMETER VIK IOH Input clamp voltage VOL Low level output voltage Low-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current TEST CONDITIONS High-level output current High-level input current Supply current, outputs high ICCL Supply current, outputs low All typical values are at VCC = 5 V, TA = 25C. MIN UNIT TYP MAX - 1.2 - 1.5 V 100 A VCC = 4.75 V, VCC = 4.75 V, II = - 12 mA VIH = 2 V, VCC = 4.75 V, VCC = 4.75 V, VIL = 0.8 V, VIL = 0.8 V, VCC = 5.25 V, VCC = 5.25 V, VI = 5.5 V VI = 2.4 V 40 A VCC = 5.25 V, VCC = 5.25 V, VI = 0.4 V VI = 5 V -1 - 1.6 mA 7 11 mA VCC = 5.25 V, VI = 0 52 65 mA VOH = 70 V IOL = 100 mA 0.25 0.4 IOL = 300 mA 0.5 0.7 1 V mA switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH Propagation delay time, high-to-low-level output IO 200 mA,, RL = 50 , CL = 15 pF,, See Figure 1 VS = 55 V, See Figure 2 IO 300 mA, SN75471 MIN Transition time, high-to-low-level output High level output voltage after switching High-level POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VS - 18 TYP MAX 30 55 25 40 8 20 10 20 UNIT ns mV 3 SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 - DECEMBER 1976 - REVISED MAY 1990 logic symbol 1A 1B 2A 2B logic diagram (positive logic) 1 & 2 3 6 5 7 1Y 1Y 2 1B 2Y 3 1 1A 5 6 2A 2Y 7 2B 4 This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. SN75472 FUNCTION TABLE (each driver) A B Y L L H (off state) L H H (off state) H L H (off state) H H L (on state) GND SN75472 schematic (each driver) VCC 1.6 k 1.6 k 4 k 130 Y A positive logic: Y = AB or A + B B 1 k 500 1 k GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range PARAMETER VIK IOH TEST CONDITIONS Input clamp voltage VCC = 4.75 V, VCC = 4.75 V, High-level output current VCC = 4.75 V, VCC = 4.75 V, VOL Low level output voltage Low-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current High-level input current VCC = 5.25 V, VCC = 5.25 V, VCC = 5.25 V, VCC = 5.25 V, Supply current, outputs high ICCL Supply current, outputs low All typical values are at VCC = 5 V, TA = 25C. VCC = 5.25 V, SN75472 MIN TYP MAX UNIT - 1.2 - 1.5 V 100 A II = - 12 mA VIH = 2 V, VOH = 70 V VIL= 0.8 V, IOL = 100 mA VIL= 0.8 V, VI = 5.5 V IOL = 300 mA 0.25 0.4 0.5 0.7 1 VI = 2.4 V VI = 0.4 V VI = 5 V VI = 0 V mA 40 A -1 - 1.6 mA 13 17 mA 61 76 mA switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH 4 Propagation delay time, high-to-low-level output IO 200 mA,, RL = 50 , CL = 15 pF,, See Figure 1 VS = 55 V, See Figure 2 IO 300 mA, SN75472 MIN Transition time, high-to-low-level output High level output voltage after switching High-level POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VS - 18 TYP MAX 45 65 30 50 13 25 10 20 UNIT ns mV SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 - DECEMBER 1976 - REVISED MAY 1990 logic symbol 1A 1B 2A 2B logic diagram (positive logic) 1 1 2 6 3 5 7 1Y 1A 1B 2Y 2A 2B This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. FUNCTION TABLE (each driver) A B L L L (on state) L H H (off state) L H (off state) H H H (off state) 1Y 2 5 6 2Y 7 4 GND schematic (each driver) VCC Y H 3 1 4 k 1.6 k 130 4 k Y A positive logic: Y = A + B or A B B 500 1 k GND Resistor values shown are nominal. electrical characteristics over recommended operating free-air temperature range SN75473 PARAMETER VIK IOH TEST CONDITIONS Input clamp voltage High-level output current VOL Low level output voltage Low-level II IIH Input current at maximum input voltage IIL ICCH Low-level input current High-level input current Supply current, outputs high ICCL Supply current, outputs low All typical values are at VCC = 5 V, TA = 25C. MIN UNIT TYP MAX - 1.2 - 1.5 V 100 A VCC = 4.75 V, VCC = 4.75 V, II = - 12 mA VIH = 2 V, VCC = 4.75 V, VCC = 4.75 V, VIL = 0.8 V, VIL = 0.8 V, VCC = 5.25 V, VCC = 5.25 V, VI = 5.5 V VI = 2.4 V VCC = 5.25 V, VCC = 5.25 V, VI = 0.4 V VI = 5 V -1 VCC = 5.25 V, VI = 0 VOH = 70 V IOL = 100 mA 0.25 0.4 IOL = 300 mA 0.5 0.7 1 V mA 40 A - 1.6 mA 8 11 mA 58 76 mA switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low-to-high-level output tTLH tTHL Transition time, low-to-high-level output VOH Propagation delay time, high-to-low-level output IO 200 mA,, RL = 50 , CL = 15 pF,, See Figure 1 VS = 55 V, See Figure 2 IO 300 mA, SN75473 MIN Transition time, high-to-low-level output High level output voltage after switching High-level POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 VS - 18 TYP MAX 30 55 25 40 8 25 10 25 UNIT ns mV 5 SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SLRS024 - DECEMBER 1976 - REVISED MAY 1990 PARAMETER MEASUREMENT INFORMATION Input 2.4 V 10 V 5 ns RL = 50 '471 '472 90% Input '471 '473 Output Pulse Generator (see Note A) Circuit Under Test GND '473 10 ns 50% 50% 10% CL = 15 pF (see Note B) 10% 0V 0.5 s 5 ns SUB 90% Input '472 10 ns 3V 90% 50% 50% 10% 10% tPHL 0.4 V 3V 90% 0V tPLH 90% 90% 50% 10% Output TEST CIRCUIT VOH 50% 10% VOL tTHL tTLH VOLTAGE WAVEFORMS NOTES: A. The pulse generator has the following characteristics: PRR 1 MHz, ZO 50 . B. CL includes probe and jig capacitance. Figure 1. Switching Times 5 ns VS = 55 V 10 ns 3V 90% Input 2.4 V '471 '472 Input '471 '473 2 mH 5V GND 50% 10% Input '472 10% 40 s 5 ns Circuit Under Test '473 50% 180 1N3064 Output Pulse Generator (see Note A) 90% 90% 50% 10 ns 3V 90% 50% 10% SUB 0V 10% CL = 15 pF (see Note B) 0V VOH Output VOL 0.4 V TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. The pulse generator has the following characteristics: PRR 12.5 kHz, ZO 50 . B. CL includes probe and jig capacitance. Figure 2. Latch-Up Test 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 12-Feb-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN75471D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75471DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75471DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75471DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75471DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75471DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75471P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75471PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75472D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75472DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75472DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75472P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75472PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75473D OBSOLETE SOIC D 8 TBD Call TI Call TI SN75473P OBSOLETE PDIP P 8 TBD Call TI Call TI Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 12-Feb-2010 provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 15-Jun-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN75471DR Package Package Pins Type Drawing SOIC D 8 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 12.4 Pack Materials-Page 1 6.4 B0 (mm) K0 (mm) P1 (mm) 5.2 2.1 8.0 W Pin1 (mm) Quadrant 12.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 15-Jun-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75471DR SOIC D 8 2500 340.5 338.1 20.6 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated