SMBJ13A100
SMBJ13A100, Rev. A
Transient Voltage Suppressor
SMBJ13A100
600 Watt Transient Voltage Suppressor
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
2002 Fairchild Semiconductor Corporation
Symbol
Parameter
Value
Units
PPPM Peak Pulse Power Dissipation on 10/1000 µs waveform minimum 600 W
IPPM Peak Pulse Cu rrent on 10/1000 µs waveform see tabl e A
IFSM Non-repetitive Peak Forward Surge Current
superimposed on rated load (JEDEC method) (Note 1) 100 A
Tstg Storage Temperature Range -55 to +150 °C
TJ Operating Ju nction Tem perature + 150 °C
Features
•Glass passivated junction.
•600W Peak Pulse Power capability on
10/1000 µs waveform.
•Excellent clamping capability.
•Low incremental surge resistance.
•Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
•Typical IR less than 1.0 µA above 10V.
DEVICES FOR BIPOLAR APPLICA TIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
Electrical Characteristics TA = 25°C unless otherwise noted
* Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices.
** For bidirectional parts with VRWM<10V, the IR max limit is doubled.
Un i-directiona l
Device Part
Marking* Reverse
Stand -off
Voltage
VRWM (V)
Breakdown
Voltage
VBR (V)
Test
Current
IT (mA)
Clamping
Voltage
@IPPM
VC (V)
Peak Pulse
Current
IPPM (A)
Reverse
Leakage
@ VRWM
IR (n A)**
min max
SMCJ13A 100 LG. 13 14.4 15.9 1 21.5 27.9 100
Top
Marking
LG. SMB/DO-214AA
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY.
NO COLOR BAND ON BIDIRECTIONAL
DEVICES.
SMBJ13A100
SMBJ13A100, Rev. A
Transient Voltage Suppressor
(continued)
Typical Characteristics
P ulse Derating Curve
0 25 50 75 100 125 150 175 200
0
25
50
75
100
AMBIE NT TEMPERATURE ( C)
PU LSE POW ER (%)
º
Non-Repetitive Surge Current
12 51020 50100
10
20
50
100
200
NU MB ER O F CYC LES AT 60Hz
F ORW AR D S URGE C URRENT (A)
T = T max
8. 3ms Si ngle Half Sine-Wave
JEDEC Method
A A
Peak Pulse Pow e r Ratin g Curve
0.0001 0.001 0.01 0.1 1 10
0.1
1
10
100
PULSE WIDTH (ms)
PULSE POWER (kW )
T = 25 C
º
A
J uncti o n Cap acitan ce
1 5 10 50 100 200
10
20
50
100
200
500
1000
2000
4000
6000
REVERS E V OL TAG E ( V )
CAPACITANCE (pF)
T = 2 5 C
º
A
f = 1.0 MHz
Visg = 50m Vp-p
Measured at
Ze ro Bias
Measured at
Sta n d-O ff
Voltage (V mw)
Pu lse Waveform
01234
0
50
100
150
TIME (ms)
PEAK PULSE CURRENT (%)
T = 25 C
º
A
Pul se W idth (td) is Define d
as the Poi n t Wh ere the P e ak
Current Dec ays to 50% o f Ipp
10/1000 µ
µµ
µsec Waveform
as Define d by R.E.A.
tf = 10µ
µµ
µsec
e-kt
Peak Value
Ippm
Half Value- Ipp
2
td
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
MICROWIRE
OPTOLOGIC
OPTOPLANAR
PACMAN
POP
Power247
PowerTrench
QFET
QS
QT Optoelectronics
Quiet Series
FAST
FASTr
FRFET
GlobalOptoisolator
GTO
HiSeC
I2C
ISOPLANAR
LittleFET
MicroFET
MicroPak
Rev. H5
â
ACEx
Bottomless
CoolFET
CROSSVOLT
DenseTrench
DOME
EcoSPARK
E2CMOSTM
EnSignaTM
FACT
FACT Quiet Series
SILENT SWITCHER
SMART START
SPM
STAR*POWER
Stealth
SuperSOT-3
SuperSOT-6
SuperSOT-8
SyncFET
TinyLogic
TruTranslation
ââ
â
STAR*POWER is used under license
UHC
UltraFET
VCX
â