Single Row Terminal Blocks A0 & CB0 Dimensions- Inches (Millimeters) Specifications A0 Rating: 10 A, 300 V Center Spacing: 0.25" (6.35 mm) Wire Range: #16-30 AWG Screw Size: M3.0 nickel-plated steel SEMS A00110407 Torque Rating: 10 lb-in. Recommended PCB Hole Diameter: 1.6 mm - 1.8 mm Operating Temperature: -40 C to +120 C Body Material: Polyamide 66, UL94 V-0, Black 0.250 (6.35) Terminal Material: Brass, tin plated 0.12 (3.0) O Breakdown Voltage: 2000 V Agency Information: UL file E62622 A Mount End Barrier End MOUNTING ENDS 0.58 (14.8) 0.295 (7.5) B Mount End Barrier End CB0 CB00220407 0.250 (6.35) 0.12 (3.0) O 0.551 (14.0) A Mount End Barrier End 0.50 (12.7) 0.248 (6.3) Mount End B Barrier End BARRIER ENDS Poles A Length B Mount Centers A Length B End Pole Centers 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1.04 1.29 1.54 1.79 2.04 2.29 2.54 2.79 3.04 3.29 3.54 3.79 4.04 4.29 4.54 4.79 5.04 5.29 5.54 5.79 6.04 6.29 6.54 6.79 7.04 7.29 7.54 7.79 8.04 0.79 1.04 1.29 1.54 1.79 2.04 2.29 2.54 2.79 3.04 3.29 3.54 3.79 4.04 4.29 4.54 4.79 5.04 5.29 5.54 5.79 6.04 6.29 6.54 6.79 7.04 7.29 7.54 7.79 0.54 0.79 1.04 1.29 1.54 1.79 2.04 2.29 2.54 2.79 3.04 3.29 3.54 3.79 4.04 4.29 4.54 4.79 5.04 5.29 5.54 5.79 6.04 6.29 6.54 6.79 7.04 7.29 7.54 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 6.75 7.00 7.25 Dimensions in inches. To convert to millimeters, multiply by 25.4. A0 & CB0 Single Row Terminal Blocks Part Numbering System Family A Terminal Style Base/End Poles 0 0 A0 - standard barrier C B Screw Options 01 - handwired 1 - mount end 02 - printed circuit 2 - barrier end 02 to 30 0 7 07- steel SEMS fully seated 0 CB0 - closed back 02 - printed circuit 1 - mount end 04 - wire wrap tail 2 - barrier end 02 to 30 Options C1 to C8 - 0.110 QC L1 to L6 marking options (pg 25) Covers- (pg 26) 7 07- steel SEMS fully seated C1 to C8 - 0.110 QC L1 to L6 marking options (pg 25) Terminal Styles- Inches(Millimeters) 0.425 (10.8) 0.197 (5.0) 0.031 (0.8) 0.138 (3.5) 0.138 (3.5) 0.047 (1.2) 0.512 (13.0) 0.031 (0.8) 0.138 (3.5) 0.047 (1.2) 0.25 (6.35) 01 02 04 Handwired Circuit Board Wire Wrap Tail 0.031 (0.8) Screw Options (Bulk ordering part numbers are in parentheses) 07 Steel SEMS nickel-plated (ACB0-SC) Hardware Options (Bulk ordering part numbers are in parentheses) Jumpers OJ (0J12-J) 2 Quick Connects Blade Width 0.110" (For other orientations, contact factory) C1 (5C1-J) EATON www.eaton.com C2 (5C2-J) C4 (5C4-J) C7 (5C7-J) C8 (5C8-J) 0.157 (4.0) Single Row Terminal Blocks A1 Dimensions Inches (Millimeters) Specifications A1 Rating: 20A, 250V* Center Spacing: 0.325" (8.26mm) Wire Range: #14-22 AWG Cu A10220307 Screw Size: #6-32 zinc-plated philslot wire-ready screws with a #2 driving recess. Torque Rating: 9 lb-in. Base: Standoffs are standard on CB1000 for easy flux washing. Distance Between Barriers: 0.26" (6.6mm) Recommended PCB Hole Diameter: 0.070" (1.78mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 1600V Agency Information: UL/CSA; IEC Compliance; CE Certified; UL File: E62622, CSA File: 15364 * General industrial applications MOUNTING ENDS ONLY BARRIER & MOUNTING ENDS BARRIER ENDS ONLY Poles A Mounting Ctrs. C Length B Pole Ctrs. C Length 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 0.98 1.30 1.63 1.95 2.28 2.60 2.93 3.25 3.58 3.90 4.23 4.55 4.88 5.20 5.53 5.85 6.18 6.50 6.83 7.15 7.48 7.80 8.13 8.45 8.78 9.10 9.43 9.75 10.08 1.37 1.69 2.02 2.34 2.67 2.99 3.32 3.64 3.97 4.29 4.62 4.94 5.27 5.59 5.92 6.24 6.57 6.89 7.22 7.54 7.87 8.19 8.52 8.84 9.17 9.49 9.82 10.14 10.47 0.33 0.65 0.98 1.30 1.63 1.95 2.28 2.60 2.93 3.25 3.58 3.90 4.23 4.55 4.88 5.20 5.53 5.85 6.18 6.50 6.83 7.15 7.48 7.80 8.13 8.45 8.78 9.10 9.43 0.72 1.04 1.37 1.69 2.02 2.34 2.67 2.99 3.32 3.64 3.97 4.29 4.62 4.94 5.27 5.59 5.92 6.24 6.57 6.89 7.22 7.54 7.87 8.19 8.52 8.84 9.17 9.49 9.82 Dimensions in inches. To convert to millimeters, multiply by 25.4. A1 Single Row Terminal Blocks Part Numbering System Family Terminal Style Base/End Poles Screw Options Options A1 - standard barrier 02 - printed circuit 1 - mount end 02 to 24 A1 Blank-std. screws CB1 - closed back 04 - wire wrap 2 - barrier end DR - angle mts. (A1 only-pg 5) B1 to B9 - 0.187" QC (all positions) L1 to L6 marking options (pg 25) LT1 to LT6 marking options (CB1 only-pg 25) MP & MT - mounting plates 0.150 dia (pg 5) R26 - rightangle bends (A1 onlypg 5) 07 - extended pin 02 to 30 CB1 03- stainless steel 07- steel SEMS & washer (not available with hardware options) Terminal Styles Inches (Millimeters) 02 04 07 Printed Circuit Wire Wrap Tail Extended Pin Screw Options Wire ready screws standard on all terminal styles (Bulk ordering part numbers are in parentheses) Standard 03 07 Zinc-Plated Steel (F508-J) Stainless Steel (F510-J) Zinc-Plated Steel Screws (F522-J) Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) Jumpers Quick Connects Blade Width B = 0.187" (JA1-xx-J) (JB1-xx-J) (JC1-xx-J) *Contact Eaton for desired configuration 4 EATON www.eaton.com ** N/A on CB1 A1 Single Row Terminal Blocks Mounting Options Mounting Plates Right Angle Bends (A1 only) Right angle terminals are offered on the A1. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the R26 Bend Option Code to the terminal part number. Options MP & MT MP Metal inserts with 0.150" (3.8) dia. hole accept #6 screw. Bend Option Code X Z R26 (04 terminal only) 0.14 (3.5) 0.09 (2.3) MT Metal inserts with tapped hole accept #6-32 screw. Bulk part numbers 1MP-J & 1MT-J. Dimensions: in (mm) Right Angle Bends (A1 only) (Dimensions in inches) Option DR Counterbored holes across mount ends of block enable fastening with two screws at right angles to normal mount position. EATON www.eaton.com 5 Single Row Terminal Blocks CB11 Dimensions Inches (Millimeters) Specifications CB11 Rating: 15 A, 300 V Center Spacing: 0.325" (8.25 mm) Wire Range: #14-22 AWG Screw Size: M3.0, nickel-plated steel CB11720407 Torque Rating: 12 lb-in. Recommended PCB Hole Diameter: 1.6 mm - 1.8 mm Operating Temperature: -40 C to +120 C Body Material: Polyamide 66, UL94 V-0, Black Terminal Material: Brass, tin plated Breakdown Voltage: 2000 V Agency Information: UL file E62622 0.325 (8.25) 0.15 (3.8) O MOUNTING ENDS 0.610 (15.5) A Mount End Barrier End 0.49 (12.5) 0.236 (6.0) Mount End B Barrier End BARRIER ENDS Poles A Length B Mount Centers A Length B End Pole Centers 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1.35 1.67 2.00 2.32 2.65 2.97 3.30 3.62 3.94 4.27 4.59 4.92 5.24 5.57 5.89 6.22 6.54 6.87 7.19 7.52 7.84 8.17 8.49 8.82 9.14 9.47 9.79 10.12 10.44 0.65 0.97 1.30 1.62 1.95 2.27 2.60 2.92 3.25 3.57 3.90 4.22 4.55 4.87 5.20 5.52 5.85 6.17 6.50 6.82 7.15 7.47 7.80 8.12 8.44 8.77 9.09 9.42 9.74 0.70 1.02 1.35 1.67 2.00 2.32 2.65 2.97 3.30 3.62 3.94 4.27 4.59 4.92 5.24 5.57 5.89 6.22 6.54 6.87 7.19 7.52 7.84 8.17 8.49 8.82 9.14 9.47 9.79 0.32 0.65 0.97 1.30 1.62 1.95 2.27 2.60 2.92 3.25 3.57 3.90 4.22 4.55 4.87 5.20 5.52 5.85 6.17 6.50 6.82 7.15 7.47 7.80 8.12 8.44 8.77 9.09 9.42 Dimensions in inches. To convert to millimeters, multiply by 25.4. CB11 Single Row Terminal Blocks Part Numbering System Family Terminal Style Base/End Poles Screw Options Options 12 - printed circuit 1 - mount end 02 to 30 03 - stainless steel 17 - extended pin 2 - barrier end B1 to B9 - 0.187 QC L1 to L6 - marking options (pg 25) LT1 to LT6 - marking options (pg 25) C B 1 CB1 - closed back 07 - steel SEMS Terminal Styles- Inches(Millimeters) 0.492 (12.5) 0.236 (6.0) 0.047 (1.2) 0.325 (8.25) 0.197 (5.0) 0.236 (6.0) 0.047 (1.2) 0.031 (0.8) 0.492 (12.5) 0.512 (13.0) 0.173 (4.4) 0.047 (1.2) 0.325 (8.25) 12 17 Printed Circuit Extended Pin 0.031 (0.8) 0.173 (4.4) Screw Options (Bulk ordering part numbers are in parentheses) 03 07 Stainless steel (CB1-SSSC) Steel SEMS Nickel-plated (CB1-STSC) Hardware Options (Bulk ordering part numbers are in parentheses) Jumpers (JA1-xx-J) (JB1-xx-J) (JC1-xx-J) EATON www.eaton.com 7 Single Row Terminal Blocks A2, LP2 & CB2 Dimensions Inches (Millimeters) Specifications A2 & LP2 Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375" or 3/8" (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32 zinc-plated philslot Torque Rating: 9 lb-in. A203504 LP201204 Base: Standoffs standard for easy flux washing Distance Between Barriers: 0.32" (8.1mm) Recommended PCB Hole Diameter: 0.076" (1.93mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 3400V (A2 & LP2); 4100V (CB2). Agency Information: UL File E62622, CSA File 47235; IEC Compliance; CE Certified * 30A Rating achieved with a #10 copper wire crimped to a ring terminal.; 20A Rating without ring terminal. CB2 CB20220407 MOUNTING ENDS ONLY BARRIER & MOUNTING ENDS BARRIER ENDS ONLY Poles A Mounting Ctrs. C Length B Pole Ctrs. C Length 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1.13 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 6.38 6.75 7.13 7.50 7.88 8.25 8.63 9.00 9.38 - - 1.56 1.93 2.30 2.68 3.06 3.43 3.81 4.18 4.56 4.93 5.31 5.69 6.06 6.43 6.81 7.18 7.56 7.93 8.31 8.68 9.06 9.43 9.81 - - 0.38 0.75 1.13 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 6.38 6.75 7.13 1.50 7.88 8.25 8.63 9.00 9.38 0.81 1.18 1.56 1.93 2.31 2.68 3.06 3.43 3.81 4.18 4.56 4.93 5.31 5.68 6.06 6.43 6.81 7.18 7.56 7.93 8.31 8.68 9.06 9.43 9.81 A2 & LP2 Single Row Terminal Blocks Part Numbering System Family Terminal Style Base/End A2 - standard barrier 01* - handwired LP2 - low profile barrier 02 - printed circuit 1 - std. base/ mnt. end 03 - non feed-thru 04 - wire wrap tail 06 - handwired 07 - extended pin 08 - printed circuit 09 - 0.250 QC short 10 - 0.187 QC 14 - printed circuit 19 - 0.250 QC long * A2 only. ** Not compatible with 03-stainless steel screws. *** SEMS screws not available with hardware options 2 - std. base/ barrier end on mount 3 - insulator base/mnt. end Poles Screw Options Options 02 to 26 Barrier end Blank-std. screws 02 to 24 Mount end 00 - screws shipped bulk AB* - angle mnt. options (pg 11) A1 to A9 - 0.250 QC B1 to B9 - 0.187 QC DR* - drilled right angle (pg 11) L1 to L6 marking options (pg 25) MP* mounting plates (pg 11) R30 to R75 - right angle bends (pg 11) S1* - solder lug/flat Covers - (pg 26) 03* - stainless steel 04 - brass nickel-plated 07 - steel SEMS*** 4 - insulator base/barrier end 09* - brass SEMS nickel-plated*** 5 - closed base/ mount end CA** - captive screw WR* - wire ready 6 - closed base/ molded mount end Base/End Note: 5 & 6 Styles only available with 03 terminals. Terminal Styles Inches (Millimeters) EATON www.eaton.com 9 A2 & LP2 Single Row Terminal Blocks Screw Options (Bulk ordering part numbers are in parentheses) Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) (JA2-xx-J) (JB2-xx-J) (JC2-xx-J) Contact Eaton for desired configuration. Base/End Options Inches (Millimeters) (not available with covers) 10 EATON www.eaton.com Note: On 1, 3 and 5 bases, Eaton may drill a terminal spacing to be a mount end. There will be no fit/form/function effect of mounting the product A2 & LP2 Single Row Terminal Blocks Mounting Options Inches (Millimeters) Right Angle Bends 07 Terminal Bend Configurations Right angle terminals are offered on the A2 & LP2. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the selected Bend Option Code to the terminal part number. 04 Terminal Bend Configurations Bend Option Code X (minimum) Z Available with insulator base R35 0.01 0.50 Yes R42 0.08 0.43 Yes R46 0.12 0.39 Yes R50 0.16 0.35 No Bend Option Code X (minimum) Z Available with insulator base R53 0.19 0.32 No R35 0.01 0.23 No R66 0.32 0.19 No R42 0.08 0.16 No R75 0.41 0.10 No R46 0.12 0.12 No R50 0.16 0.08 No Dimensions in inches. To convert to millimeters, multiply by 25.4. Dimensions in inches. To convert to millimeters, multiply by 25.4. Drilled Right Angle Angle Brackets Option DR Counterbored holes across mount ends of block enable fastening with two screws at right angles to normal mount position. Option AB Angle brackets enable block to be fastened at right angles to normal mount position. Bulk part number 2AB-J. Mounting Plates Options MP MP Metal inserts with 0.150" dia. hole accept #6 screw. Bulk part number 2MP-J. EATON www.eaton.com 11 CB2 Single Row Terminal Blocks Part Numbering System Family C B Terminal Style Base/End Poles Screw Options Options 01 - handwired 1 - mount end Blank-std. screws 02 - printed circuit 2 - barrier end 02 to 26 on barrier end AB - angle mounting brackets (pg 13) A7 to A9 - 0.250" QC B7 to B9 - 0.187" QC EB - exit back terminals EF - exit front terminals L1 to L6 marking options (pg 25) LT1 to LT6 marking options (pg 25) MP mtg. plates (pg 13) Covers - (pg 26) 2 CB2 - closed back 07 - extended pin 14 - printed circuit Terminal Styles Inches (Millimeters) Screw Options (Bulk ordering part numbers are in parentheses) CB2 Terminal Exit Options Inches (Millimeters) 12 EATON www.eaton.com 02 to 24 on mount end 07 - steel SEMS standard 09 - brass SEMS nickel-plated CB2 Single Row Terminal Blocks Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) Contact Eaton for desired configuration. Mounting Options Inches (Millimeters) Right Angle Mounting Bracket Option AB Mounts blocks on PC boards at a right angle. * Protects solder joints. * Bracket snaps securely on block (no hardware required). * Minimum strip length (end positions are usable). * Mount with #6-32 or #8-32 screws (not supplied). * Available on 3 pole configurations and greater Mounting Plates Option MP MP Metal inserts with 0.150" dia. hole accept #6 screw. Bulk part number 2MP-J. EATON www.eaton.com 13 Single Row Terminal Blocks A3, LP3 & CB3 Dimensions Inches (Millimeters) Specifications A3 & LP3 Rating: A3: 30A, 600V* LP3: 30A, 150V* CB3: 30A, 600V* Wire Range: #12-22 AWG Cu Center Spacing: 0.437" or 7/16" (11.10mm) Screw Size: #6-32 zinc-plated philslot screws. LP307102 A31930307 Torque Rating: 9 lb-in. Base: Standoffs standard for easy flux washing. Distance Between Barriers: 0.32" (8.1mm) Recommended PCB Hole Diameter: 0.076" (1.93mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 3500V (A3 & LP3); 8200V (CB3) Agency Information: UL File E62622, CSA 47235; IEC Compliance, CE Certified * 30A Rating achieved with a #10 copper wire crimped to a ring terminal; 20 Rating without ring terminal. CB3 CB35110407MP MOUNTING ENDS ONLY BARRIER & MOUNTING ENDS BARRIER ENDS ONLY Poles A Mounting Ctrs. C Length B Pole Ctrs. C Length 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 1.31 1.75 2.18 2.62 3.06 3.50 3.93 4.37 4.81 5.25 5.68 6.12 6.56 7.00 7.43 7.87 8.31 8.75 9.18 9.62 10.06 10.50 10.93 11.37 11.81 - - 1.73 2.17 2.61 3.05 3.48 3.92 4.36 4.80 5.23 5.67 6.11 6.55 6.98 7.42 7.86 8.30 8.73 9.17 9.60 10.05 10.48 10.92 11.36 11.80 12.23 - - 0.43 0.87 1.31 1.75 2.18 2.62 3.06 3.50 3.93 4.37 4.81 5.25 5.68 6.12 6.56 7.00 7.43 7.87 8.31 8.50 9.18 9.62 10.06 10.50 10.98 11.81 11.37 0.98 1.43 1.87 2.31 2.75 3.18 3.62 4.06 4.50 4.93 5.37 5.81 6.25 6.68 7.12 7.56 8.00 8.43 8.87 9.31 9.75 10.18 10.62 11.06 11.50 12.37 11.07 A3 Single Row Terminal Blocks Part Numbering System Family A Terminal Style Base/End Poles Screw Options Options 01 - handwired 1 - std. base/ mount end 02 to 28 barrier end Blank-std. screws 2 - std. base/ barrier 02 to 26 mount end 04 - brass nickel-plated AB - angle mnt. options (pg 18) A1 to A9 - 0.250" QC B1 to B9 - 0.187" QC L1 to L6 marking options (pg 25) MP, MT - mounting plates (pg 18) RC - retaining clips (pg 18) R30 to R66 - right angle bends (pg 18) 3 A3 - standard barrier 02 - printed circuit 03 - non feed-thru 04 - wire wrap tail 05 - extended handwired 07 - extended pin 09 - 0.250 QC short 10 - 0.187 QC 3* - insulator base/mount end 4* - insulator base/barrier end 5** - closed base/mount end 19 - 0.250 QC long 03 - stainless steel 07 - steel SEMS zincplated*** 09 - brass SEMS nickel-plated*** 07WR - steel SEMS wire ready CA - captive screw * Base/End Styles 3 and 4 not available with 02, 03, and 09 terminals. ** Base/End Note: 5 Style only available with 03 terminals. *** SEMS screws not available with hardware options Not compatible with 03 stainless steel screw option. Terminal Styles Inches (Millimeters) Screw Options (Bulk ordering part numbers are in parentheses) EATON www.eaton.com 15 LP3 Single Row Terminal Blocks Part Numbering System Family L P Terminal Style Base/End Poles Screw Options Options 01 - handwired 1 - std. base/ mount end 02 to 28 barrier end Blank-std. screws 2 - std. base/ barrier 02 to 26 04 - brass nickel-plated A1 to A9 - 0.250" QC B1 to B9 - 0.187" QC L1 to L6 marking options (pg 25) MP - mounting plates (pg 18) R30 to R66 - right angle bends (pg 18) 3 LP3 - low profile barrier 02 - printed circuit 03 - non feed-thru 04 - wire wrap tail 05 - extended handwired 07 - extended pin * A2 only. ** Not compatible with 03-stainless steel screws. *** SEMS screws not available with hardware options Terminal Styles Inches (Millimeters) Screw Options (Bulk ordering part numbers are in parentheses) 16 EATON www.eaton.com 3* - insulator base/mount end 4* - insulator base/barrier end 5** - closed base/mount end on mount end 00 - screws shipped 07 - steel SEMS zincplated*** CA - captive screw A3 & LP3 Single Row Terminal Blocks Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) Jumpers Quick Connects Blade Width A = 0.250" Blade Width B = 0.187" Contact Eaton for desired configuration. Base/End Options Inches (Millimeters) Mount End Details Note: On 1, 3 and 5 bases, Eaton may drill a terminal spacing to be a mount end. There will be no fit/form/function effect of mounting the product EATON www.eaton.com 17 A3 & LP3 Single Row Terminal Blocks Mounting Options Inches (Millimeters) Right Angle Mounting Bracket Angle Brackets (A3 only) Right angle terminals are offered on the A3 & LP3. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the selected Bend Option Code to the terminal part number. 04 Terminal Bend Configurations Option AB Angle brackets enable block to be fastened at right angles to normal mount position. Bulk part number 2AB-J. Bend Option Code X (minimum) Z Available w/insulator base R36 0.02 0.22 No R42 0.08 0.16 No R46 0.12 0.12 No R50 0.16 0.08 No Mounting Plates Dimensions in inches. To convert to millimeters, multiply by 25.4. Options MP & MT 07 Terminal Bend Configurations MP Metal inserts with 0.150" dia. hole accept #6 screw. MT Metal inserts with tapped hole accept #6-32 screw. Bulk part number 2MP-J, 2MT-J. Retaining Clip Bend Option Code X (minimum) Z Available w/insulator base R36 0.02 0.49 Yes R50 0.16 0.35 No R66 0.32 0.19 No Dimensions in inches. To convert to millimeters, multiply by 25.4. 18 EATON www.eaton.com Options RC Use on standoff tubes. Fit panels up to 0.125" thick. Two clips for every five positions. Supplied unassembled. Bulk part number H541-J. CB3 Single Row Terminal Blocks Part Numbering System Family C B Terminal Style Base/End Poles Screw Options Options 01 - handwired #6-32 screw 1 - mount end 02 to 22 barrior end 07 - steel SEMS (standard) 02 to 20 09 - brass SEMS nickel-plated A7 to A9 - 0.250" QC B7 to B9 - 0.187" QC EB exit back terminals L1 to L6 marking options (pg 25) LT1 to LT6 marking options (pg 25) MP mtg. plates (pg 20) Covers - (pg 26) 3 CB3 - closed back 02 - printed circuit #6-32 screw 2 - barrier end 07 - extended pin #6-32 screw 51* - handwired #8-32 screw on mount end CA - SEMS captive 52* - printed circuit #8-32 screw *Note: #8-32 screw is a special with #6-32 head. Terminal Styles Inches (Millimeters) Screw Options (Bulk ordering part numbers are in parentheses) CB3 Terminal Exit Options Inches (Millimeters) EATON www.eaton.com 19 CB3 Single Row Terminal Blocks Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) Contact Eaton for desired configuration. Mounting Options Inches (Millimeters) Mounting Plates Options MP MP Metal inserts with 0.150" dia. hole accept #6 screw. 20 EATON www.eaton.com Single Row Terminal Blocks A38 & B38 Dimensions Inches (Millimeters) Specifications A38 A38: 30A, 600V B38: 50A, 300V Center Spacing: 0.437" (11.10mm) Wire Range: A38: #10-22 AWG Cu; B38: #8-16 AWG Screw Size: #8-32 zinc-plated steel A389306 Torque Rating: A38: 9 lb-in; B38: 15 lb-in for #8, 9 lb-in for #6 Base: A38 Only: Standoffs standard for easy flux washing Distance Between Barriers: 0.378" (9.60mm) Recommended PCB Hole Diameter (A38): 0.076" (1.93mm) Operating Temperature: 105C (221F) max to -40C (-40F) Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 5000V Agency Information: UL File E62622, CSA File 47235; CE Certified B38 B384404 MOUNTING ENDS ONLY BARRIER ENDS ONLY Poles A Mounting Centers "A" Dimension Length "A" Dimension Length 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 1.31 1.75 2.19 2.62 3.06 3.50 3.93 4.37 4.81 5.24 5.68 6.12 6.56 6.99 7.43 1.67 2.10 2.54 2.98 3.41 3.85 4.29 4.72 5.16 5.60 6.04 6.47 6.91 7.35 7.78 0.93 1.37 1.81 2.25 2.68 3.12 3.56 3.99 4.43 4.87 5.30 5.74 6.18 6.61 7.05 Dimensions in inches. To convert to millimeters, multiply by 25.4. A38 & B38 Single Row Terminal Blocks Part Numbering System Family A 3 Terminal Style Base/End Poles Screw Options 1 - handwired* 1 - flat base, mount end 02 to 16 Blank - standard screw (steel zincplated, philslot BHMS) 8 2 - printed circuit 7 - extended wire wrap 9 - 0.250" QC* 2 - flat base, barrier end 04 - brass, nickelplated, philslot BHMS 3 - insulator base** mount end Family 3 Covers - (pg 26) Terminal Style Base/End Poles Screw Options Options 3 - screw terminal (#6-32 screw top & bottom) 4 - insulator base, barrior end 02 to 16 L1 to L6 marking options (pg 25) 4 - stud (#8-32 screw top, #6-32 stud bottom) 9 - insulator base, mount end Blank - standard screw (steel zincplated, philslot BHMS) 8 5* - double stud (#6-32 stud top & bottom) *C360 Copper Alloy (bright tim plate) A38 Terminal Styles Inches (Millimeters) Wire ready screws standard B38 Terminal Styles Screw Options (Bulk ordering part numbers are in parentheses) 22 L1 to L6 marking options (pg 25) 07 - steel, SEMS zincplated philslot screw 4 - insulator base** barrier end B Options EATON www.eaton.com 34** - #6-32 nickelplated brass philslot BHMS **Note: 34 screws only available with "3" terminal style Covers - (pg 26) Single Row Terminal Blocks A & B4 A4 B4 Specifications Rating: See table. Center Spacing: 0.562" or 9/16" (14.28mm) Wire Range: See rating table. Screw Size: #8-32 or #10-32 zinc-plated slotted screws A400303 Torque Rating: #8 screw size 16 lb-in. B484302 #10 screw size 20 lb-in. Distance Between Barriers: 0.47" (11.9mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Hardware: Bottom studs supplied with nuts assembled. Extended Hex Nuts: Optional extended, slotted hex nuts enable easier installation and removal with hex wrench or screwdriver. Available in bulk for the #10-32 studs on A4953 blocks. Specify part number F582 and quantity. Breakdown Voltage: 6100V Agency Information: UL File E62622, CSA File 47235; CE Certified Dimensions Inches (Millimeters) MOUNTING ENDS ONLY Rating Table Part Number Terminal Top Terminal Bottom Wire* Range Cu Ratings* Volts/ Amps A4003XX A4011XX A4013XX A4035XX A4041XX A4043XX A4813XX A4843XX A4953XX B4843XX # 8 Screw # 8 Screw # 8 Screw # 8 Screw #10 Screw #10 Screw #10 Screw #10 Screw #10 Stud #10 Screw #8 Stud Solder Solder Closed Solder Solder SolderTurret #8 Screw #10 Stud #8 Screw 8-16 AWG 10-16 AWG 10-16 AWG 8-16 AWG 10-16 AWG 10-16 AWG 10-16 AWG 8-16 AWG 8-16 AWG 8-16 AWG 150V/50A 600V/35A 600V/35A 600V/50A 600V/35A 600V/35A 600V/35A 150V/50A 150V/50A 600V/50A * All models 30A Max. with 10 AWG 35-50A ratings with 8 AWG using ring or fork type terminals. Note: 50A rating achieved with #8 copper wire crimped to ring terminal. Poles "A" Mounting Centers "B" Dimension Length 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 1.690 2.255 2.820 3.385 3.950 4.515 5.080 5.645 6.212 6.777 7.342 7.908 8.473 9.038 9.605 2.120 2.685 3.250 3.817 4.382 4.947 5.513 6.078 6.644 7.210 7.775 8.340 8.905 9.470 10.035 Dimensions in inches. To convert to millimeters, multiply by 25.4. Reference Panel Cutout for 6 Position Block A & B4 Single Row Terminal Blocks Part Numbering System Family Terminal Style Base/End Poles Screw Options Options A4 00 - screw top; stud bottom 02 to 16 Blank - std. screws B4 01 - screw top; solder bottom *1 - flat base/ mount end A1 to A9 0.250" QC 03 - screw top only 04 - #10 screw top; solder term. b. 81 - screw top; solder turret bottom #10-32 84 - screw top; screw bottom #10-32 95 - stud top*, stud bottom * Available in 01, 04 terminal styles only Terminal Styles Inches (Millimeters) Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) 24 EATON www.eaton.com 3 - insulator base(not available in 03 terminal style)/mount end 5 - closed base/ mount end (available in 03 terminal only 00 - screws shipped bulk 04 - brass nickelplated 07 - steel SEMS zinc plated (not available with hardware options; only available on A4011, A4013, A4021 and A4035) L1 to L6 marking options (pg 25) Covers - (pg 26) All Marking Options Single Row Terminal Blocks Marking Options & Accessories Standard Marking Markings are applied directly to the sides of A0, CB0, A1, CB11, A2, LP2, CB2, A3, LP3, CB3, A38, B38, A&B4. Standard characters are white and 1/8" high. Factory may substitute 3/32" high characters. 3 2 1 L1 3 1 2 3 Blocks to be marked on both sides require a different code for each side. Example: "L1" on one side of the block requires "L2" on the other side to ensure common terminal marking. Specify by adding suffix to part number. L2 L3 Special Marking 1 2 3 3 2 1 L1 & LT1 = Upright numerals, numbered from left to right L2 & LT2 = Upright numerals, numbered from right to left L3 = Left lying numerals, numbered from left to right L4 = Right lying numerals, numbered from right to left 134 GND BLU 3 M 4 G 134 INPUT PUT 3AC MB TER L6 & LT6 = Upside down numerals, numbered from left to right MAX A K 20A L5 & LT5 = Upside down numerals, numbered from right to left 5 3 Special markings are available upon request at an additional charge for preparation. Production charges for setup, handling and marking are the same as for standard marking and the same quantity discounts apply. Consult factory L4 L5 for price and delivery. L6 Closed Barrier Terminal Block Marking Options for (CB11, CB2 and CB3) EATON www.eaton.com 25 All Accessories Single Row Terminal Blocks Cover Options - Single Row Terminal Block Covers Available for A1, A2, A3, A & B4, LP2, & LP. (mount ends only) Three styles of UL 94V0 thermoplastic covers are offered in black. Covers are ordered separately and supplied with two clips each, unless ordered without clips. Optional markings may be specified (white on black). Notes: Covers cannot be used with: * mounting plate options MP & MT. * certain quick connect terminals. * 6 base/end styles on A2 Bulk Cover Clips: 1000 Family = CC1-J; 2000 & 3000 Family = CC2-J; 4000 Family = CC4-J. Cover Poles Markings (if desired) Options 02 to 36 BF - bottom forward 00 - without clips BB - skirted access, both sides, black 1 - 1000 BO - skirted access, one side, black 2 - 2000 TF - top forward BC - open access, both sides, black* 3 - 3000 BR - bottom reverse * Not available in 4000 4 - 4000 TF - top reverse Snap-On Covers for A38/B38/A0 & CB2/CB3 Can be used on both mount ends and barrier bases A38/B38/A0 CB2/CB3 T A 8 A38 T B 8 B38 T O 2 CB2 T A 0 A0 T O 3 CB3 Poles Note: these are labeled as the letter "O" not a "zero" 26 EATON www.eaton.com Single Row Terminal Blocks Effective December 2017 Contact Us Tools Sales and Customer Service Eaton's Electronics Product Selection Tools Americas Email: elx.americas@eaton.com Europe, Middle East, Africa Email: elx.emea@eaton.com PARAMETRIC SEARCH Drill down into the Eaton Electronics product database to find the right part for your application. IC MATCHING Find the Eaton Electronics parts called out on IC manufacturers' demo and evaluation boards. China Email: elx.cn@eaton.com Japan Email: elx.jp@eaton.com CROSS REFERENCE Find a cross to a competitor's product or to an alternate Eaton Electronics part number. Korea Email: elx.kr@eaton.com South East Asia Email: elx.sea@eaton.com SUPERCAPACITOR CALCULATOR Determine your calculated requirements and design capability. Taiwan Email: elx.tw@eaton.com Global Technical Support Magnetics: InductorTech@eaton.com Circuit Protection: FuseTech@eaton.com Supercapacitors: CapacitorTech@eaton.com www.eaton.com/terminalblocks TERMINAL BLOCK SELECTOR Find the right terminal block for any application. AUTOMOTIVE ELECTRONICS SOLUTIONS Find electronics components for automotive solutions. tools.eatonelectronics.com Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics (c) 2017 Eaton All Rights Reserved Printed in USA Publication No. 10682 -- BU-MC17075 December 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.