Discover TDK
www.component.tdk.com
For Samples, Datasheets and Additional Product Information
on these and other TDK Wireless Solutions . . .
TDK Corporation of America
1221 Business Center Drive, Mount Prospect, IL 60056
Phone: +1 (847) 803-6100
Fax: +1 (847) 803-1125
Email: wirelessinfo@tdktca.com
Visit our website: www.component.tdk.com
Discover TDK Solutions
RF Components for Wireless Applications
Discover TDK Solutions
RF Components for Wireless Applications
● Band Pass Filters
● Diplexer s
● Low Pass Filters
● Couplers
● High Frequency Inductors
● Circulators/ Isolators
● Baluns
● Antennas
● High Pass Filters
● Test Services
● Test Equipment
● Anechoic Chambers
Discover TDK
www.component.tdk.com
TDK RF Components & Services :
Discover TDK
www.component.tdk.com
18
TDK Test & Measurement Solutions for Your UWB Wireless System
UWB
UWB-
-EMC Test System
EMC Test System
UWB-EMC test system (for test and measurement of radi-
ated emission from UWB radio) Ultra wide frequency meas-
urement required FCC compliance test.
Ultra wide dynamic ranges for UWB test which radiate very
low power emission.
TDK’s original anechoic chamber, antenna, and software
based test system.
Possible to upgrade your EMC test systems to state-of-the-
art UWB-EMC test system.
3m chamber (FCC comply, 9x6x5.7m)
Compact chamber (FCC comply, 7x4x3m)
TDK’s original hybrid anechoic chamber
Test system for measurement up to 40GHz
Hardware, software, & training are included
TDK Offers Complete Turnkey Systems of Anechoic Chambers
TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turn-
key 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies.
Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements
and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated.
Anechoic chambers for EMC Testing:
3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m)
TDK’s high performance electromagnetic absorber material
(IB-015 and IP-045 absorber)
Automatically controlled turntable and antenna mast via optical fiber.
Normalized Site Attenuation (NSA) measurement for compliance.
Anechoic Chamber for Antenna Testing
Anechoic chamber (compact type, 7x4x4m)
TDK’s high performance electromagnetic absorber material (IS-060 absorber)
TDK’ original oblique incident absorber, IS-SM050, for exceptional absorption
performance
Quiet zone (QZ) measurement
TDK Services for UWB Wireless Systems
Discover TDK
www.component.tdk.com
Table of Contents
TDK offers a series of RF components for many wireless applications.
From filters and antennas to test services and anechoic chambers solutions,
TDK has a solution for you.
● WLAN SOLUTIONS PAGE 04
● BLUETOOTH SOLUTIONS PAGE 08
● WiMAX Solutions Page 10
● UWB SOLUTIONS PAGE 13
Discover TDK
www.component.tdk.com
RF Components for WLAN Applications
Please contact TDK for evaluation samples and detailed specifications.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Insertion Loss
dB (MAX) Part Number
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9008A1
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9018A1
2400 2500 0.5 4900 5850 0.75 DPX205850DT-4027B1
Size
mm (typ.)
2.0x1.25x0.95
2.0x1.25x0.95
2.0x1.25x0.95
Diplexer for 2.4GHz & 5GHz
TDK WLAN components provide leading edge miniaturization technology while
providing exceptional electrical characteristics. TDK RF Components are
recommended by leading WLAN chipset manufacturers.
The following pages list our standard BPF’s, LPF’s, HPF’s, diplexers and baluns
for 2.4GHz & 5GHz WLAN.
Discover TDK
www.component.tdk.com
17
TDK’s advanced wireless radio testing services have been used by leading UWB chipset companies for both,
FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing,
report preparation and submission.
Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products.
UWB transceiver testing requires measurements spanning
wide frequency and dynamic ranges. TDK provides FCC
compliance testing using specialized instrumentation and
an optimized facility to provide test reports.
FCC granted UWB transceiver
General Atomics: AEVK-1
Wisair: DV9100
3D radiation pattern of typical dipole antenna.
Antenna performance is an important part of the UWB solution.
TDK performs antenna analysis for high performance Certified
Wireless USB transceiver development.
TDK supports the complete FCC submission process.
TDK Test Labs
located in
Austin & Tokyo
TDK Compliance Test Services & Expertise For UWB Wireless Systems
TDK Services for UWB Wireless Systems
Discover TDK
www.component.tdk.com
16
TDK Balanced Antenna for Use in UWB Applications
TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The
antenna’s unique structure allows it to maintain similar performance regardless of ground plane
size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has
been designed for ease of integration in various applications without the worry of complex
board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs.
Contact TDK for full spec sheets and application notes
Radiation Patterns
There is a significant difference in ground plane
size but almost no difference in VSWR results.
The antenna bandwidth is not detuned by
changing the ground plane size.
TDK RF Components for UWB Applications
Parameter Value Unit
Operation Frequency 3.1—5.2 GHz
Polarization Linear (Mixed) None
Antenna Gain 2.0 (typ.) dBi
Impedance 50 ohm
VSWR 3 (Max) None
Electrical Specifications
Discover TDK
www.component.tdk.com
Sample Specification : DEA252450BT-2024C2
RF Components for WLAN Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.)
MHz dB MHz dB MHz dB
2400 2500 1.2 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252400BT-2027A1
2300 2500 1.4 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-2030A1
2400 2500 1.5 915 35 2100 20 4800 23 2.5X2.0X0.9 DEA252450BT-2031A1
2400 2500 2.1 915 45 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-2024C1
2400 2500 3.2 800 40 2170 23 4800 25 2.0X1.2X0.65 DEA252450BT-2068A1
2300 2500 3.0 960 50 1990 48 2170 22 2.5X2.0X0.9 DEA252450BT-2024C2
Part No.
2400 2500 3.0 960 50 1990 40 2170 33 2.5X2.0X0.9 DEA252450BT-2024D4
2400 2500 1.5 1900 30 2.5X1.2X0.95 DEA252450BT-1251A1
2400 2500 1.5 1300 25 3600 30 4800 34 2.0X1.2X0.9 DEA252450BT-1213C1
2400 2500 2.9 960 40 2170 16 4800 30 2.0X1.2X0.65 DEA252450BT-2038A5
2300 2500 2.0 915 25 1910 25 4800 20 1.6X0.8X0.6 DEA162450BT-1241A1
2400 2500 2.0 915 25 1910 20 4800 20 1.6X0.8X0.55 DEA162450BT-1247B1
2400 2500 2.5 915 25 1910 20 4800 25 1.6X0.8X0.55 DEA162450BT-1247C1
2400 2500 3.0 1250 30 1900 20 4800 25 1.6X0.8X0.6 DEA162450BT-1210A1
Multilayer Band Pass Filter for 2.4GHz
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2500 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1
2300 2500 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1
High Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2484 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1
2400 2500 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Insertion Loss 2400-2480 — 3.0 2.29 dB
2 Return Loss 2400-2480 10.0 — 13.7 dB
3 Attenuation 880-960 50.0 — 53.8 dB
4 Attenuation 1565-1585 50.0 — 54.7 dB
5 Attenuation 1710-1880 48.0 — 58.3 dB
6 Attenuation 1930-1990 48.0 — 65.5 dB
7 Attenuation 2110-2170 22.0 — 33.6 dB
No.
Electrical Characteristics at 25deg C
Mechanical Dimensions (unit: mm)
Discover TDK
www.component.tdk.com
RF Components for WLAN Applications
Sample Specification : DEA255425BT-2028A4
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5150 5900 2.2 3450 35 1.6X0.8X0.6 DEA165487BT-1202
5150 5900 1.5 3450 35 2.0X1.2X0.9 DEA205437BT-1200
4900 5950 1.5 3450 25 9800 17 2.0X1.2X0.9 DEA205425BT-1209B2
4900 5950 2.0 3300 40 4000 25 7300 14 2.0X1.2X0.95 DEA205425BT-2028A4
4900 5850 1.2 824 50 1910 50 9800 15 2.5X2.0X0.9 DEA255375BT-2076A1
4940 5850 3.5 2700 40 4650 24 7250 39 2.5X2.0X1.0 DEA255395BT-2065D2
Multilayer Band Pass Filter for 5GHz (Wide Band)
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5125 5725 1.5 6800 12 10250 25 11450 25 1.6X0.8X0.8 DEA165725LT-1196A2
4900 5950 0.7 9800 20 11900 30 1.6X0.8X0.8 DEA165850LT-1197B2
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
4900 5950 2.8 100 4000 30 8000 20 2.0X1.5X1.3 DEA215425BT-7075C2
Balanced Output Multilayer Band Pass Filter
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Center Frequency 5425 — — — —
2 Insertion Loss 4900-5950 — 1.6 2.0 dB
3 Insertion Loss
-40 ~ +85 °C 4900-5950 — 1.9 2.3 dB
4 Return Loss 4900-5950 9 11 — dB
5 Attenuation 1280-3300 40 50 — dB
6 Attenuation 3300-4000 25 33 — dB
7 Attenuation 4375-4465 7 12 — dB
No.
8 Attenuation 7300-8930 14 18 — dB
9 Attenuation 9800-11900 25 38 — dB
Electrical Characteristics at 25deg C
Discover TDK
www.component.tdk.com
15
Balun Example : unbalanced 50 to balanced 100
Unbalanced Input
50 ohm
Balanced Output
100 ohm
Pin Configuration:
1. Unbalanced Port
2. GND or DC feed
3. Balanced Port
4. Balanced Port
5. GND
6. N.C.
Unit: mm
< > < > < >
6 5 4
1 2 3
(Top View)
1.25
0.15
±
0.95
±
0.1
0.3 ± 0.2
0.35 ± 0.2
0.05 ± 0.2 0.2 ± 0.2
0.25 ±0.1/0.2
2.0 ± 0.15
Mechanical Dimensions
(Bottom View)
Electrical Characteristics at 25 degC
No. PARAMETER FREQ (MHz)
SPEC
Min. Max.
1 Insertion Loss (Lo-Band Port) 2300-2500 _ 1.2 dB
2 Insertion Loss (Hi-Band Port) 3168-4572 _ 1.7 dB
3 Return Loss (ANT Port) 2300-2500 10.0 _ dB
4 Return Loss (ANT Port) 3168-4572 4.5 dB
5 Attenuation (Hi-Band Port) 2300-2500 20.0 _ dB
6 Attenuation (Lo-Band Port) 3168-4572 20.0 _ dB
UNIT
Return Loss [dB]
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
Return Loss [dB]
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
Return Loss Amplitude Balance
3
2
1
0
-1
-2
-3
Amplitude [dB]
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
200
190
180
170
160
Phase Balance [dB]
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
3100.0 MHz
-17.06 dB
4000 MHz
-35.20 dB
4900 MHz
- 20.65 dB
3100.0 MHz
-0.44 dB
4000 MHz
-0.35 dB
4900 MHz
- 0.53 dB
3100.0 MHz
-0.10 dB
4000 MHz
-0.27 dB
4900 MHz
- 0.68 dB
3100.0 MHz
176.69 deg
4000 MHz
175.64 deg
4900 MHz
182.12 deg
HHM 1583B1
TDK Baluns for UWB Applications
TDK RF Components for UWB Applications
Discover TDK
www.component.tdk.com
14
TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version.
The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz
applications. Reduced footprint series is for applications requiring minimum attenuation.
Please contact TDK for full spec sheets and application notes.
UWB-Typical Data (De-embedded)
-60
-50
-40
-30
-20
-10
0
500 1500 2500 3500 4500 5500 6500 7500 8500 9500
Frquency (MHz)
Gain (dB)
Performance
Series
Reduced
Footprint Series
TDK Band Pass Filters for UWB Applications
DEA-3002B1
[MECHANICAL DIMENSIONS]
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
Insertion Loss (T=25°C) 3168-4752 1.9 dB
Insertion Loss (T=30°C to 85°C) 3168-4752 2.2 dB
Input Return Loss 3168-4752 10 dB
Attenuation DC-2200 30 dB
Attenuation 2200-2500 26 dB
Attenuation 5151-5300 23 dB
Attenuation 5300-7000 26 dB
Attenuation 7000-14000 15 dB
Electrical Characteristics at (T=30°C to 85°C, ZL=50Ω)
No. Parameter Freq. (MHz) Specification Unit
1 Insertion Loss 3.168-4.752 2.0 max dB
2 Return Loss 3.168-4.752 10 min dB
3 Attenuation DC-2.4 25 min dB
4 Attenuation 2.5 25 min dB
5 Attenuation 5.15-7.0 20 min dB
6 Attenuation 7.0-14.5 15 min dB
Electrical Characteristics Ta=25°C
Frequency Characteristic Frequency Characteristic
TDK RF Components for UWB Applications
Discover TDK
www.component.tdk.com
RF Components for WLAN Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
2400 (2300) 2500 1.2 50 2.0 180+/- 10 2.0X1.2X0.95 HHM157(A2)
2400 (2300) 2500 1.0 75 1.5 180+/- 10 2.0X1.2X0.95 HHM1541E1(E2)
2400 (2300) 2500 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1520(A2)
2400 (2300) 2500 1.0(1.1) 200 2.0 180+/- 10 2.0X1.2X0.95 HHM1521(A2)
2400 2500 1.2 50 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1
2400 2500 1.2 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1
2400 2500 1.0 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711N1
2400 2500 1.2 150 2.0 180+/- 10 1.6X0.8X0.6 HHM1712D1
2400 2500 1.2 200 1.7 180+/- 10 1.6X0.8X0.6 HHM1713E2
2400 2500 1.0 50 2.0 180+/- 10 1.0X0.5X0.45 HHM1902A1
2400 2500 1.0 100 2.0 180+/- 10 1.0X0.5X0.45 HHM1903A1
Balun Transformers for 2.4GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
5150 5875 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B
4900 5950 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1
4900 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1
4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1
4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2
Balun Transformers for 5GHz (Wide Band)
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
3400 4010 1.2 50 1.5 180+/- 10 2.0X1.2X0.95 HHM1545
3400 4010 0.8 100 1.5 180+/- 10 2.0X1.2X0.95 HHM1594A1
3400 3925 1.2 200 1.0 180+/- 10 1.6X0.8X0.6 HHM1548E1
Balun Transformers for Local (802.11a)
Discover TDK
www.component.tdk.com
Base band
Switch
Transceiver
BPF
ANT
Balun
Balanced output BPF
Balanced impedance can
be optimized to match IC
TDK has designed a series of Balanced Output BPF’s that are optimized to match the
impedance requirements of Bluetooth IC’s.
TDK RF components can be used in different architectures (see Example 1 & 2).
Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun
information.
TDK RF Components are recommended by leading Bluetooth chipset manufacturers.
RF Components for Bluetooth Applications
Discover TDK
www.component.tdk.com
13
TDK RF Components for UWB Applications
TDK components & services for UWB Technology include:
♦ Antennas
♦ Baluns
♦ Band Pass Filters
♦ Diplexers
♦ EMI Filters
♦ Test Systems
♦ Test Services
♦ Anechoic Chambers
♦ Inductors
♦ Capacitors
The Wireless Ecosystem brings together various technologies required to develop and manufacture advanced
wireless products, systems and equipment. TDK provides key building blocks necessary to bring Certified
Wireless USB, High Data Rate Bluetooth and other UWB products to market.
Wireless Ecosystem
Discover TDK
www.component.tdk.com
12
TDK RF Components for WiMAX Applications
ANT1
RX1_2G_N
RX1_2G_P
TX_2G_N
TX_2G_P
VDET
VCNT1
VCNT2
VCC_PA VREF
Bias
VATT
RX2_2G_N
RX2_2G_P
ANT2
RX Balanced BPF
RX Balanced BPF
TX Balun
TX LPF
Power Amplifier with Power Detection
SPDT
ESD Protection
Front-End Module for 802.16e Mobile WiMAX Applications
• Operating Frequency: 2.5 to 2.7 GHz
• Integrated 25dB Attenuator
• Integrated Output Power Detector
• 50 W Matched RF Ports
• Low Profile LGA Package for Mobile Application: 6.0 x 5.6 x 1.2 mm
• Supports 1X2 (1 TX & 2 RX) Configuration
• Multi-Chip Technology: Integrated Power Amplifier and T/R Switch
• Utilizes TDK’s LTCC Technology to embed all required filtering
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2490 2710 1.2 1800 44 3400 42 4400 38 8.0X3.0X3.5 S0486A
3230 3410 1.2 1800 56 2462 45 4400 37 8.0X3.0X3.5 S0486B
3390 3660 1.2 1800 58 2462 45 4400 40 8.0X3.0X3.5 S0486C
3590 3810 1.2 1800 58 2462 45 4400 48 8.0X3.0X3.5 S0486D
Ceramic Block Band Pass Filter for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Isolation dB
(min)
V.S.W.R.
0=50 ohm (Max)
Max. Handling
Power (W)
Size
mm (typ.) Part No.
2500 2700 0.4 20.0 1.3 20.0 20X20X8.5 CU1S2001AC-2600
2900 3100 0.4 20.0 1.25 20.0 20X20X11.5 CU1S2002AC-3000
3400 3600 0.5 18.0 1.3 20 (Ave) 20X20X8.0 CU1S2001AC-3500
Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
700 750 2.2 650 30 800 25 1000 40 13.2X10X4 S0465D
Ceramic Block Band Pass Filter for 700MHz
Discover TDK
www.component.tdk.com
MULTILAYER Band Pass Filter (Balance output Type)
P/N: DEA 252450BT-7022B1
For Bluetooth and 2.4Ghz W-LAN
MECHANICAL DIMENSIONS
Top View
RF Components for Bluetooth Applications
Parameter Specification Typical Value Unit
Frequency Range (Pass Band) 2400-2500 — MHz
Unbalanced Port Characteristics Impedance 50 (nominal) — Ω
Balanced Port Characteristics Impedance 100 (nominal) — Ω
Unbalanced Port Return Loss 9.5 min — dB
Insertion Loss (Pass Band)
+25°C 3.0 max 2.7 dB
-40 — +85°C 3.0 max 3.0 dB
Ripple (Pass Band) 1.0 max 0.2 dB
Attenuation
880-960MHz 48 min 52 dB
1710-1880MHz 45 min 51 dB
1880-1980MHz 40 min 54 dB
2110-2170MHz 25 min 33 dB
4800-5000MHz 30 min 38 dB
Apmlitude Impedence at Balanced Port 1.0 max -0.2 dB
Phase Differences at Balanced Port +25°C 180±8 183 Deg
-40 — +85°C 180±10 — Deg
Electrical Characteristics
PIN ASSIGNMENT PIN No.
Unbalanced 1
Balanced 4,5
GND 3,6
DC feed or RF GND 2
PIN CONFIGURATION
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
2400 2500 1.7 50 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7014D1
2400 2500 1.9 100 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7012D1
2400 2500 2.4 50 1920 20 4800 23 2.5X2.0X0.9 DEA252450BT-7001B1
2400 2500 3.0 100 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-7022B1
2402 2480 3.5 30+j30 2170 23 4800 25 2.5X2.0X0.95 DEA252441BT-7053D2
2400 2500 3.6 34+j72 2170 48 2170 22 2.5X2.0X0.9 DEA252450BT-7035B2
2400 2500 2.7 50 2170 40 2170 33 2.1X1.50X0.9 DEA212450BT-7031A1
2400 2500 3.6 55+j50 2170 2.1X1.50X0.9 DEA212450BT-7043C1
2402 2480 CSR BC4 CSR BC4 2.1X1.25X0.6 DEA202450BT-7041E1
2400 2500 3.4 55+j50 2168 20 4800 26 2.1X1.25X0.9 DEA202450BT-7089C2
2400 2500 3.5 100 2170 25 2.1X1.25X0.7 DEA202450BT-7054B1
2400 2500 3.5 34+j72 2170 17 4800 25 2.1X1.25X0.95 DEA202450BT-7077A1
Match to CSR BC4
For 2.4GHz
Multilayer Balanced Band Pass Filter
Discover TDK
www.component.tdk.com
TDK RF Components for WiMAX Applications
TDK’s newest line-up of RF Components for WiMAX applications can be used in
both client and base station designs. These components have been developed to
work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Coupling
dB
Isolation
dB V.S.W.R Size
mm (typ.) Part No.
2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3
2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2233SA7
2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3
3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1
Couplers 2.3GHz, 2.5GHz & 3.5GHz
Discover TDK
www.component.tdk.com
11
TDK RF Components for WiMAX Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
2300 2700 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1
2300 2700 1.2 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711E1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1
3300 3900 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1727D1
3300 3900 1.0 100 1.2 180+/- 10 1.6X0.8X0.6 HHM1715E1
Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2300 2690 1.8 915 30 1800 19 4800 43 2.0X1.25X.95 DEA202495BT-124B2
2496 2690 2.5 960 50 2125 28 4800 33 2.5X2.0X1.0 DEA252593BT-2074A3
2496 2690 1.5 915 50 2125 31 4800 45 2.5X2.0X1.0 DEA252593BT-2079A1
3300 3900 2.2 915 27 2170 27 4800 15 2.0X1.25X.95 DEA203600BT-1230B2
Multilayer Ceramic Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2700 0.4 4800 26 5350 26 7200 23 1.6X0.8X0.6 DEA162700LT-5014A1
3400 3600 0.5 5000 10 5000 30 7200 26 1.6X0.8X0.6 DEA163600LT-5017A1
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
2300 2400 2.5 100 1910 39 4800 36 2.5X2.0X1.0 DEA252350BT-7093A1
2300 2690 2.8 50 1910 13 4800 40 2.5X2.0X0.9 DEA212495BT-7055A2
2300 2690 2.5 100 1910 18 4800 23 2.5X2.0X0.9 DEA212495BT-7097A2
3300 3900 2.5 50 1910 49 5000 17 2.5X2.0X0.9 DEA213600BT-7095A2
3300 3900 2.5 100 1910 30 4800 13 2.5X2.0X0.95 DEA213600BT-7095A1
Multilayer Ceramic Balanced Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Size
mm (typ.) Part No.
2300 2690 1.6 3300 3900 1.6 2.0X1.25X0.60 DPX203900DT-9019A1
2300 2690 1.9 3300 3900 1.7 3.2X2.5X1.2 DPX322600DT-0003
2500 2690 1.2 3300 3900 1.3 3.2X2.5X1.2 DPX323600DT-0004
Diplexer
Discover TDK
www.component.tdk.com
10
TDK RF Components for WiMAX Applications
TDK’s newest line-up of RF Components for WiMAX applications can be used in
both client and base station designs. These components have been developed to
work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Coupling
dB
Isolation
dB V.S.W.R Size
mm (typ.) Part No.
2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3
2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2233SA7
2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3
3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1
Couplers 2.3GHz, 2.5GHz & 3.5GHz
Discover TDK
www.component.tdk.com
TDK RF Components for WiMAX Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
2300 2700 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1
2300 2700 1.2 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711E1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1
3300 3900 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1727D1
3300 3900 1.0 100 1.2 180+/- 10 1.6X0.8X0.6 HHM1715E1
Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2300 2690 1.8 915 30 1800 19 4800 43 2.0X1.25X.95 DEA202495BT-124B2
2496 2690 2.5 960 50 2125 28 4800 33 2.5X2.0X1.0 DEA252593BT-2074A3
2496 2690 1.5 915 50 2125 31 4800 45 2.5X2.0X1.0 DEA252593BT-2079A1
3300 3900 2.2 915 27 2170 27 4800 15 2.0X1.25X.95 DEA203600BT-1230B2
Multilayer Ceramic Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2700 0.4 4800 26 5350 26 7200 23 1.6X0.8X0.6 DEA162700LT-5014A1
3400 3600 0.5 5000 10 5000 30 7200 26 1.6X0.8X0.6 DEA163600LT-5017A1
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
2300 2400 2.5 100 1910 39 4800 36 2.5X2.0X1.0 DEA252350BT-7093A1
2300 2690 2.8 50 1910 13 4800 40 2.5X2.0X0.9 DEA212495BT-7055A2
2300 2690 2.5 100 1910 18 4800 23 2.5X2.0X0.9 DEA212495BT-7097A2
3300 3900 2.5 50 1910 49 5000 17 2.5X2.0X0.9 DEA213600BT-7095A2
3300 3900 2.5 100 1910 30 4800 13 2.5X2.0X0.95 DEA213600BT-7095A1
Multilayer Ceramic Balanced Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Size
mm (typ.) Part No.
2300 2690 1.6 3300 3900 1.6 2.0X1.25X0.60 DPX203900DT-9019A1
2300 2690 1.9 3300 3900 1.7 3.2X2.5X1.2 DPX322600DT-0003
2500 2690 1.2 3300 3900 1.3 3.2X2.5X1.2 DPX323600DT-0004
Diplexer
Discover TDK
www.component.tdk.com
TDK RF Components for WiMAX Applications
ANT1
RX1_2G_N
RX1_2G_P
TX_2G_N
TX_2G_P
VDET
VCNT1
VCNT2
VCC_PA VREF
Bias
VATT
RX2_2G_N
RX2_2G_P
ANT2
RX Balanced BPF
RX Balanced BPF
TX Balun
TX LPF
Power Amplifier with Power Detection
SPDT
ESD Protection
Front-End Module for 802.16e Mobile WiMAX Applications
• Operating Frequency: 2.5 to 2.7 GHz
• Integrated 25dB Attenuator
• Integrated Output Power Detector
• 50 W Matched RF Ports
• Low Profile LGA Package for Mobile Application: 6.0 x 5.6 x 1.2 mm
• Supports 1X2 (1 TX & 2 RX) Configuration
• Multi-Chip Technology: Integrated Power Amplifier and T/R Switch
• Utilizes TDK’s LTCC Technology to embed all required filtering
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2490 2710 1.2 1800 44 3400 42 4400 38 8.0X3.0X3.5 S0486A
3230 3410 1.2 1800 56 2462 45 4400 37 8.0X3.0X3.5 S0486B
3390 3660 1.2 1800 58 2462 45 4400 40 8.0X3.0X3.5 S0486C
3590 3810 1.2 1800 58 2462 45 4400 48 8.0X3.0X3.5 S0486D
Ceramic Block Band Pass Filter for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Isolation dB
(min)
V.S.W.R.
0=50 ohm (Max)
Max. Handling
Power (W)
Size
mm (typ.) Part No.
2500 2700 0.4 20.0 1.3 20.0 20X20X8.5 CU1S2001AC-2600
2900 3100 0.4 20.0 1.25 20.0 20X20X11.5 CU1S2002AC-3000
3400 3600 0.5 18.0 1.3 20 (Ave) 20X20X8.0 CU1S2001AC-3500
Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
700 750 2.2 650 30 800 25 1000 40 13.2X10X4 S0465D
Ceramic Block Band Pass Filter for 700MHz
Discover TDK
www.component.tdk.com
9
MULTILAYER Band Pass Filter (Balance output Type)
P/N: DEA 252450BT-7022B1
For Bluetooth and 2.4Ghz W-LAN
MECHANICAL DIMENSIONS
Top View
RF Components for Bluetooth Applications
Parameter Specification Typical Value Unit
Frequency Range (Pass Band) 2400-2500 — MHz
Unbalanced Port Characteristics Impedance 50 (nominal) — Ω
Balanced Port Characteristics Impedance 100 (nominal) — Ω
Unbalanced Port Return Loss 9.5 min — dB
Insertion Loss (Pass Band)
+25°C 3.0 max 2.7 dB
-40 — +85°C 3.0 max 3.0 dB
Ripple (Pass Band) 1.0 max 0.2 dB
Attenuation
880-960MHz 48 min 52 dB
1710-1880MHz 45 min 51 dB
1880-1980MHz 40 min 54 dB
2110-2170MHz 25 min 33 dB
4800-5000MHz 30 min 38 dB
Apmlitude Impedence at Balanced Port 1.0 max -0.2 dB
Phase Differences at Balanced Port +25°C 180±8 183 Deg
-40 — +85°C 180±10 — Deg
Electrical Characteristics
PIN ASSIGNMENT PIN No.
Unbalanced 1
Balanced 4,5
GND 3,6
DC feed or RF GND 2
PIN CONFIGURATION
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
2400 2500 1.7 50 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7014D1
2400 2500 1.9 100 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7012D1
2400 2500 2.4 50 1920 20 4800 23 2.5X2.0X0.9 DEA252450BT-7001B1
2400 2500 3.0 100 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-7022B1
2402 2480 3.5 30+j30 2170 23 4800 25 2.5X2.0X0.95 DEA252441BT-7053D2
2400 2500 3.6 34+j72 2170 48 2170 22 2.5X2.0X0.9 DEA252450BT-7035B2
2400 2500 2.7 50 2170 40 2170 33 2.1X1.50X0.9 DEA212450BT-7031A1
2400 2500 3.6 55+j50 2170 2.1X1.50X0.9 DEA212450BT-7043C1
2402 2480 CSR BC4 CSR BC4 2.1X1.25X0.6 DEA202450BT-7041E1
2400 2500 3.4 55+j50 2168 20 4800 26 2.1X1.25X0.9 DEA202450BT-7089C2
2400 2500 3.5 100 2170 25 2.1X1.25X0.7 DEA202450BT-7054B1
2400 2500 3.5 34+j72 2170 17 4800 25 2.1X1.25X0.95 DEA202450BT-7077A1
Match to CSR BC4
For 2.4GHz
Multilayer Balanced Band Pass Filter
Discover TDK
www.component.tdk.com
TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version.
The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz
applications. Reduced footprint series is for applications requiring minimum attenuation.
Please contact TDK for full spec sheets and application notes.
UWB-Typical Data (De-embedded)
-60
-50
-40
-30
-20
-10
0
500 1500 2500 3500 4500 5500 6500 7500 8500 9500
Frquency (MHz)
Gain (dB)
Performance
Series
Reduced
Footprint Series
TDK Band Pass Filters for UWB Applications
DEA-3002B1
[MECHANICAL DIMENSIONS]
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
Insertion Loss (T=25°C) 3168-4752 1.9 dB
Insertion Loss (T=30°C to 85°C) 3168-4752 2.2 dB
Input Return Loss 3168-4752 10 dB
Attenuation DC-2200 30 dB
Attenuation 2200-2500 26 dB
Attenuation 5151-5300 23 dB
Attenuation 5300-7000 26 dB
Attenuation 7000-14000 15 dB
Electrical Characteristics at (T=30°C to 85°C, ZL=50Ω)
No. Parameter Freq. (MHz) Specification Unit
1 Insertion Loss 3.168-4.752 2.0 max dB
2 Return Loss 3.168-4.752 10 min dB
3 Attenuation DC-2.4 25 min dB
4 Attenuation 2.5 25 min dB
5 Attenuation 5.15-7.0 20 min dB
6 Attenuation 7.0-14.5 15 min dB
Electrical Characteristics Ta=25°C
Frequency Characteristic Frequency Characteristic
TDK RF Components for UWB Applications
Discover TDK
www.component.tdk.com
7
RF Components for WLAN Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
2400 (2300) 2500 1.2 50 2.0 180+/- 10 2.0X1.2X0.95 HHM157(A2)
2400 (2300) 2500 1.0 75 1.5 180+/- 10 2.0X1.2X0.95 HHM1541E1(E2)
2400 (2300) 2500 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1520(A2)
2400 (2300) 2500 1.0(1.1) 200 2.0 180+/- 10 2.0X1.2X0.95 HHM1521(A2)
2400 2500 1.2 50 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1
2400 2500 1.2 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1
2400 2500 1.0 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711N1
2400 2500 1.2 150 2.0 180+/- 10 1.6X0.8X0.6 HHM1712D1
2400 2500 1.2 200 1.7 180+/- 10 1.6X0.8X0.6 HHM1713E2
2400 2500 1.0 50 2.0 180+/- 10 1.0X0.5X0.45 HHM1902A1
2400 2500 1.0 100 2.0 180+/- 10 1.0X0.5X0.45 HHM1903A1
Balun Transformers for 2.4GHz
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
5150 5875 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B
4900 5950 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1
4900 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1
4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1
4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2
Balun Transformers for 5GHz (Wide Band)
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imed.
ohm
Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
3400 4010 1.2 50 1.5 180+/- 10 2.0X1.2X0.95 HHM1545
3400 4010 0.8 100 1.5 180+/- 10 2.0X1.2X0.95 HHM1594A1
3400 3925 1.2 200 1.0 180+/- 10 1.6X0.8X0.6 HHM1548E1
Balun Transformers for Local (802.11a)
Discover TDK
www.component.tdk.com
6
RF Components for WLAN Applications
Sample Specification : DEA255425BT-2028A4
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5150 5900 2.2 3450 35 1.6X0.8X0.6 DEA165487BT-1202
5150 5900 1.5 3450 35 2.0X1.2X0.9 DEA205437BT-1200
4900 5950 1.5 3450 25 9800 17 2.0X1.2X0.9 DEA205425BT-1209B2
4900 5950 2.0 3300 40 4000 25 7300 14 2.0X1.2X0.95 DEA205425BT-2028A4
4900 5850 1.2 824 50 1910 50 9800 15 2.5X2.0X0.9 DEA255375BT-2076A1
4940 5850 3.5 2700 40 4650 24 7250 39 2.5X2.0X1.0 DEA255395BT-2065D2
Multilayer Band Pass Filter for 5GHz (Wide Band)
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5125 5725 1.5 6800 12 10250 25 11450 25 1.6X0.8X0.8 DEA165725LT-1196A2
4900 5950 0.7 9800 20 11900 30 1.6X0.8X0.8 DEA165850LT-1197B2
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Bal. Imped.
ohm
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
4900 5950 2.8 100 4000 30 8000 20 2.0X1.5X1.3 DEA215425BT-7075C2
Balanced Output Multilayer Band Pass Filter
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Center Frequency 5425 — — — —
2 Insertion Loss 4900-5950 — 1.6 2.0 dB
3 Insertion Loss
-40 ~ +85 °C 4900-5950 — 1.9 2.3 dB
4 Return Loss 4900-5950 9 11 — dB
5 Attenuation 1280-3300 40 50 — dB
6 Attenuation 3300-4000 25 33 — dB
7 Attenuation 4375-4465 7 12 — dB
No.
8 Attenuation 7300-8930 14 18 — dB
9 Attenuation 9800-11900 25 38 — dB
Electrical Characteristics at 25deg C
Discover TDK
www.component.tdk.com
Balun Example : unbalanced 50 to balanced 100
Unbalanced Input
50 ohm
Balanced Output
100 ohm
Pin Configuration:
1. Unbalanced Port
2. GND or DC feed
3. Balanced Port
4. Balanced Port
5. GND
6. N.C.
Unit: mm
< > < > < >
6 5 4
1 2 3
(Top View)
1.25
0.15
±
0.95
±
0.1
0.3 ± 0.2
0.35 ± 0.2
0.05 ± 0.2 0.2 ± 0.2
0.25 ±0.1/0.2
2.0 ± 0.15
Mechanical Dimensions
(Bottom View)
Electrical Characteristics at 25 degC
No. PARAMETER FREQ (MHz)
SPEC
Min. Max.
1 Insertion Loss (Lo-Band Port) 2300-2500 _ 1.2 dB
2 Insertion Loss (Hi-Band Port) 3168-4572 _ 1.7 dB
3 Return Loss (ANT Port) 2300-2500 10.0 _ dB
4 Return Loss (ANT Port) 3168-4572 4.5 dB
5 Attenuation (Hi-Band Port) 2300-2500 20.0 _ dB
6 Attenuation (Lo-Band Port) 3168-4572 20.0 _ dB
UNIT
Return Loss [dB]
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
Return Loss [dB]
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
Return Loss Amplitude Balance
3
2
1
0
-1
-2
-3
Amplitude [dB]
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
200
190
180
170
160
Phase Balance [dB]
2500 3000 3500 4000 4500 5000 5500
Frequency [MHz]
3100.0 MHz
-17.06 dB
4000 MHz
-35.20 dB
4900 MHz
- 20.65 dB
3100.0 MHz
-0.44 dB
4000 MHz
-0.35 dB
4900 MHz
- 0.53 dB
3100.0 MHz
-0.10 dB
4000 MHz
-0.27 dB
4900 MHz
- 0.68 dB
3100.0 MHz
176.69 deg
4000 MHz
175.64 deg
4900 MHz
182.12 deg
HHM 1583B1
TDK Baluns for UWB Applications
TDK RF Components for UWB Applications
Discover TDK
www.component.tdk.com
TDK Balanced Antenna for Use in UWB Applications
TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The
antenna’s unique structure allows it to maintain similar performance regardless of ground plane
size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has
been designed for ease of integration in various applications without the worry of complex
board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs.
Contact TDK for full spec sheets and application notes
Radiation Patterns
There is a significant difference in ground plane
size but almost no difference in VSWR results.
The antenna bandwidth is not detuned by
changing the ground plane size.
TDK RF Components for UWB Applications
Parameter Value Unit
Operation Frequency 3.1—5.2 GHz
Polarization Linear (Mixed) None
Antenna Gain 2.0 (typ.) dBi
Impedance 50 ohm
VSWR 3 (Max) None
Electrical Specifications
Discover TDK
www.component.tdk.com
5
Sample Specification : DEA252450BT-2024C2
RF Components for WLAN Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.)
MHz dB MHz dB MHz dB
2400 2500 1.2 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252400BT-2027A1
2300 2500 1.4 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-2030A1
2400 2500 1.5 915 35 2100 20 4800 23 2.5X2.0X0.9 DEA252450BT-2031A1
2400 2500 2.1 915 45 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-2024C1
2400 2500 3.2 800 40 2170 23 4800 25 2.0X1.2X0.65 DEA252450BT-2068A1
2300 2500 3.0 960 50 1990 48 2170 22 2.5X2.0X0.9 DEA252450BT-2024C2
Part No.
2400 2500 3.0 960 50 1990 40 2170 33 2.5X2.0X0.9 DEA252450BT-2024D4
2400 2500 1.5 1900 30 2.5X1.2X0.95 DEA252450BT-1251A1
2400 2500 1.5 1300 25 3600 30 4800 34 2.0X1.2X0.9 DEA252450BT-1213C1
2400 2500 2.9 960 40 2170 16 4800 30 2.0X1.2X0.65 DEA252450BT-2038A5
2300 2500 2.0 915 25 1910 25 4800 20 1.6X0.8X0.6 DEA162450BT-1241A1
2400 2500 2.0 915 25 1910 20 4800 20 1.6X0.8X0.55 DEA162450BT-1247B1
2400 2500 2.5 915 25 1910 20 4800 25 1.6X0.8X0.55 DEA162450BT-1247C1
2400 2500 3.0 1250 30 1900 20 4800 25 1.6X0.8X0.6 DEA162450BT-1210A1
Multilayer Band Pass Filter for 2.4GHz
Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2500 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1
2300 2500 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1
High Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2484 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1
2400 2500 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Insertion Loss 2400-2480 — 3.0 2.29 dB
2 Return Loss 2400-2480 10.0 — 13.7 dB
3 Attenuation 880-960 50.0 — 53.8 dB
4 Attenuation 1565-1585 50.0 — 54.7 dB
5 Attenuation 1710-1880 48.0 — 58.3 dB
6 Attenuation 1930-1990 48.0 — 65.5 dB
7 Attenuation 2110-2170 22.0 — 33.6 dB
No.
Electrical Characteristics at 25deg C
Mechanical Dimensions (unit: mm)
Discover TDK
www.component.tdk.com
4
RF Components for WLAN Applications
Please contact TDK for evaluation samples and detailed specifications.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Insertion Loss
dB (MAX) Part Number
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9008A1
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9018A1
2400 2500 0.5 4900 5850 0.75 DPX205850DT-4027B1
Size
mm (typ.)
2.0x1.25x0.95
2.0x1.25x0.95
2.0x1.25x0.95
Diplexer for 2.4GHz & 5GHz
TDK WLAN components provide leading edge miniaturization technology while
providing exceptional electrical characteristics. TDK RF Components are
recommended by leading WLAN chipset manufacturers.
The following pages list our standard BPF’s, LPF’s, HPF’s, diplexers and baluns
for 2.4GHz & 5GHz WLAN.
Discover TDK
www.component.tdk.com
TDK’s advanced wireless radio testing services have been used by leading UWB chipset companies for both,
FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing,
report preparation and submission.
Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products.
UWB transceiver testing requires measurements spanning
wide frequency and dynamic ranges. TDK provides FCC
compliance testing using specialized instrumentation and
an optimized facility to provide test reports.
FCC granted UWB transceiver
General Atomics: AEVK-1
Wisair: DV9100
3D radiation pattern of typical dipole antenna.
Antenna performance is an important part of the UWB solution.
TDK performs antenna analysis for high performance Certified
Wireless USB transceiver development.
TDK supports the complete FCC submission process.
TDK Test Labs
located in
Austin & Tokyo
TDK Compliance Test Services & Expertise For UWB Wireless Systems
TDK Services for UWB Wireless Systems
Discover TDK
www.component.tdk.com
8
Base band
Switch
Transceiver
BPF
ANT
Balun
Balanced output BPF
Balanced impedance can
be optimized to match IC
TDK has designed a series of Balanced Output BPF’s that are optimized to match the
impedance requirements of Bluetooth IC’s.
TDK RF components can be used in different architectures (see Example 1 & 2).
Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun
information.
TDK RF Components are recommended by leading Bluetooth chipset manufacturers.
RF Components for Bluetooth Applications
Discover TDK
www.component.tdk.com
TDK RF Components for UWB Applications
TDK components & services for UWB Technology include:
♦ Antennas
♦ Baluns
♦ Band Pass Filters
♦ Diplexers
♦ EMI Filters
♦ Test Systems
♦ Test Services
♦ Anechoic Chambers
♦ Inductors
♦ Capacitors
The Wireless Ecosystem brings together various technologies required to develop and manufacture advanced
wireless products, systems and equipment. TDK provides key building blocks necessary to bring Certified
Wireless USB, High Data Rate Bluetooth and other UWB products to market.
Wireless Ecosystem
Discover TDK
www.component.tdk.com
TDK Test & Measurement Solutions for Your UWB Wireless System
UWB
UWB-
-EMC Test System
EMC Test System
UWB-EMC test system (for test and measurement of radi-
ated emission from UWB radio) Ultra wide frequency meas-
urement required FCC compliance test.
Ultra wide dynamic ranges for UWB test which radiate very
low power emission.
TDK’s original anechoic chamber, antenna, and software
based test system.
Possible to upgrade your EMC test systems to state-of-the-
art UWB-EMC test system.
3m chamber (FCC comply, 9x6x5.7m)
Compact chamber (FCC comply, 7x4x3m)
TDK’s original hybrid anechoic chamber
Test system for measurement up to 40GHz
Hardware, software, & training are included
TDK Offers Complete Turnkey Systems of Anechoic Chambers
TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turn-
key 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies.
Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements
and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated.
Anechoic chambers for EMC Testing:
3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m)
TDK’s high performance electromagnetic absorber material
(IB-015 and IP-045 absorber)
Automatically controlled turntable and antenna mast via optical fiber.
Normalized Site Attenuation (NSA) measurement for compliance.
Anechoic Chamber for Antenna Testing
Anechoic chamber (compact type, 7x4x4m)
TDK’s high performance electromagnetic absorber material (IS-060 absorber)
TDK’ original oblique incident absorber, IS-SM050, for exceptional absorption
performance
Quiet zone (QZ) measurement
TDK Services for UWB Wireless Systems
Discover TDK
www.component.tdk.com
Table of Contents
TDK offers a series of RF components for many wireless applications.
From filters and antennas to test services and anechoic chambers solutions,
TDK has a solution for you.
● WLAN SOLUTIONS PAGE 04
● BLUETOOTH SOLUTIONS PAGE 08
● WiMAX Solutions Page 10
● UWB SOLUTIONS PAGE 13
Discover TDK
www.component.tdk.com
For Samples, Datasheets and Additional Product Information
on these and other TDK Wireless Solutions . . .
TDK Corporation of America
1221 Business Center Drive, Mount Prospect, IL 60056
Phone: +1 (847) 803-6100
Fax: +1 (847) 803-1125
Email: wirelessinfo@tdktca.com
Visit our website: www.component.tdk.com
Discover TDK Solutions
RF Components for Wireless Applications
Discover TDK Solutions
RF Components for Wireless Applications
● Band Pass Filters
● Diplexer s
● Low Pass Filters
● Couplers
● High Frequency Inductors
● Circulators/ Isolators
● Baluns
● Antennas
● High Pass Filters
● Test Services
● Test Equipment
● Anechoic Chambers
Discover TDK
www.component.tdk.com
TDK RF Components & Services :
