www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45053
38 Revision: 23-Sep-09
VJ C0G (NP0) Dielectric
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
FEATURES
•C0G is an ultra-stable dielectric offering a
Temperature Coefficient of Capacitance (TCC)
of 0 ppm/°C ± 30 ppm/°C
•Low Dissipation Factor (DF)
•Surface mount, wet build process
•Reliable Noble Metal Electrode (NME) system
•Halogen-free according to IEC 61249-2-21
APPLICATIONS
•Timing and tuning circuits
•Sensor and scanner applications
•Snubber and surge suppression
ELECTRICAL SPECIFICATIONS
Note:
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
Capacitance Range: 1.0 pF to 0.056 µF
Voltage Range: 10 Vdc to 1000 Vdc
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 Vrms and 1 kHz for values > 1000 pF
0.1 % maximum at 1.0 Vrms and 1 MHz for values ≤ 1000 pF
Aging Rate: 0 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Strength Test:
Performed per Method 103 of EIA 198-2-E.
Applied test voltages:
≤ 500 Vdc-rated: 200 % of rated voltage
630 Vdc/1000 Vdc-rated: 150 % of rated voltage
Notes
(1) DC voltage rating should not be exceeded in application
(2) Process Code may be added with up to three digits, used to control non-standard products and/or special requirements
(3) Case size designator may be replaced by a four digit drawing number used to control non-standard products and/or requirements
(4) “A2” temporarily used to identify manufacturing plant for size ≥ 1812
(5) Selected values available, contact mlcc@vishay.com for list of released ratings
ORDERING INFORMATION
VJ0805 A 102 K X A A T ###
(2)(4)
CASE
CODE DIELECTRIC CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE TERMINATION DC VOLTAGE
RATING (1) MARKING PACKAGING PROCESS
CODE
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
A = C0G (NP0) Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An
“R” indicates a
decimal point.
Examples:
102 = 1000 pF
1R8 = 1.8 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
J = ± 5 %
K = ± 10 %
Note:
B, C, D < 10 pF
F, G, J, K ≥ 10 pF
X = Ni barrier
100 % tin plate
matte finish
F = AgPd
B = Polymer
100 % tin plate
matte finish (5)
X = 25 V
A = 50 V
B = 100 V
C = 200 V
E = 500 V
L = 630 V
G = 1000 V
A = Unmarked
M = Marked
Note: Marking is
only available for
0805 and 1206
with termination
code ”X”
T = 7" reel/plastic tape
C = 7" reel/paper tape
R = 11 1/4" reel/plastic tape
P = 11 1/4" reel/paper tape
O = 7" reel/flamed paper tape
I = 11 1/4"/13" reel/flamed paper tape
Note: “I” and “O” is used for
“F” termination paper taped
size 0402/0603/0805
VJ C0G (NP0) Dielectric
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Vishay Vitramon
Document Number: 45053 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 23-Sep-09 39
Note
• Polymer terminations, “B” termination part number code, length dimensions, positive tolerances (including band width) above are allowed to
increase by the following amounts:
0402/0603 size, consult mlcc@vishay.com
0805/1210/1812/2220/2225 max. add length 0.0040"/0.10 mm
1206/1808 max. add length 0.0055"/0.14 mm
DIMENSIONS in inches [millimeters]
EIA STYLE
PART
ORDERING
NUMBER
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
TERMINATION (P)
MINIMUM MAXIMUM
0402 VJ0402 0.040 + 0.004/- 0.002
[1.00 + 0.10/- 0.05]
0.020 + 0.004/- 0.002
[0.50 + 0.10/- 0.05]
0.024
[0.60]
0.004
[0.10]
0.016
[0.41]
0603 VJ0603 0.063 ± 0.005
[1.60 ± 0.12]
0.031 ± 0.005
[0.80 ± 0.12]
0.037
[0.94]
0.012
[0.30]
0.018
[0.46]
0805 VJ0805 0.079 ± 0.008
[2.00 ± 0.20]
0.049 ± 0.008
[1.25 ± 0.20]
0.057
[1.45]
0.010
[0.25]
0.028
[0.71]
1206 VJ1206 0.126 ± 0.008
[3.20 ± 0.20]
0.063 ± 0.008
[1.60 ± 0.20]
0.067
[1.70]
0.010
[0.25]
0.028
[0.71]
1210 VJ1210 0.126 ± 0.008
[3.20 ± 0.20]
0.098 ± 0.008
[2.50 ± 0.20]
0.067
[1.70]
0.010
[0.25]
0.028
[0.71]
- VJ1808 0.177 ± 0.010
[4.50 ± 0.25]
0.080 ± 0.010
[2.03 ± 0.25]
0.067
[1.70]
0.010
[0.25]
0.030
[0.76]
1812 VJ1812 0.177 ± 0.010
[4.50 ± 0.25]
0.126 ± 0.008
[3.20 ± 0.20]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
1825 VJ1825 0.177 ± 0.010
[4.50 ± 0.25]
0.252 ± 0.010
[6.40 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
- VJ2220 0.220 ± 0.008
[5.59 ± 0.20]
0.200 ± 0.010
[5.08 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
- VJ2225 0.220 ± 0.010
[5.59 ± 0.25]
0.250 ± 0.010
[6.35 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
LW
T
MAX.
P
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45053
40 Revision: 23-Sep-09
VJ C0G (NP0) Dielectric
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Note
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
•• Paper tape • Plastic tape
SELECTION CHART
DIELECTRIC C0G (NP0)
STYLE VJ0402 VJ0603 VJ0805 VJ1206 VJ1210 (1)
EIA TYPE 0402 0603 0805 1206 1210
VOLTAGE (Vdc) 25 50 100 50 100 200 50 100 200 500 50 100 200 500 630 50 100 200 500 630
CAP.
CODE CAP.
1R0 1.0 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
1R2 1.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
1R5 1.5 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
1R8 1.8 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
2R2 2.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
2R7 2.7 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
3R3 3.3 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
3R9 3.9 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
4R7 4.7 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
5R6 5.6 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
6R8 6.8 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
8R2 8.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• ••
100 10 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
120 12 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
150 15 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
180 18 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
220 22 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
270 27 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
330 33 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
390 39 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
470 47 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •
560 56 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • •
680 68 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • •
820 82 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • •
101 100 pF •• •• •• •• •• •• •• •• •• •• ••••• •••
121 120 pF •• •• •• •• •• •• •• •• •• •• ••••• •••
151 150 pF •• •• •• •• •• •• •• •• •• ••••• •••
181 180 pF •• •• •• •• • •• •• •• •• ••••• •••
221 220 pF •• •• •• •• • •• •• •• •••••••••••
271 270 pF •• •• • •• •• •• •••••••••••
331 330 pF •• •• •• •• •• •••••••••••
391 390 pF •• •• •• •• •• •••••••••••
471 470 pF •• •• •• ••••••••••••
561 560 pF •• •• •• • ••••••••••
681 680 pF •• •• •• • ••••••••••
821 820 pF •• •• •• • ••••••••••
102 1000 pF •• •• • ••••••••••
122 1200 pF •• • • • • •••••
152 1500 pF •• • • • • •••••
182 1800 pF • • • • •••••
222 2200 pF • • • • • • •
272 2700 pF • • • • • • •
332 3300 pF • • • • • • •
392 3900 pF • • • • • •
472 4700 pF • • • • •
562 5600 pF • • • •
682 6800 pF • • •
822 8200 pF • •
103 0.010 µF • •
123 0.012 µF •
153 0.015 µF
183 0.018 µF
223 0.022 µF
273 0.027 µF
333 0.033 µF
393 0.039 µF
473 0.047 µF
563 0.056 µF
VJ C0G (NP0) Dielectric
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
Vishay Vitramon
Document Number: 45053 For technical questions, contact: mlcc@vishay.com www.vishay.com
Revision: 23-Sep-09 41
Note:
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape
SELECTION CHART
DIELECTRIC C0G (NP0)
STYLE VJ1808 (1) VJ1812 (1) VJ1825 (1) VJ2220 (1) VJ2225 (1)
EIA TYPE - 1812 1825 - -
VOLTAGE (Vdc)
50 100 200 500 1000 50 100 200 500 1000 50 100 200 500 50 100 200 500 1000 50 100 200 500
CAP.
CODE CAP.
1R0 1.0 pF
1R2 1.2 pF
1R5 1.5 pF
1R8 1.8 pF
2R2 2.2 pF
2R7 2.7 pF
3R3 3.3 pF
3R9 3.9 pF
4R7 4.7 pF
5R6 5.6 pF
6R8 6.8 pF
8R2 8.2 pF
100 10 pF
120 12 pF
150 15 pF
180 18 pF
220 22 pF
270 27 pF
330 33 pF
390 39 pF • • • • •
470 47 pF • • • • •
560 56 pF • • • • •
680 68 pF • • • • • •
820 82 pF • • • • • •
101 100 pF • • • • • • • • •
121 120 pF • • • • • • • • • •
151 150 pF • • • • • • • • • •
181 180 pF • • • • • • • • • •
221 220 pF • • • • • • • • • • • • •
271 270 pF • • • • • • • • • • • • •
331 330 pF • • • • • • • • • • • • •
391 390 pF • • • • • • • • • • • • •
471 470 pF • • • • • • • • • • • • •
561 560 pF • • • • • • • • • • • • •
681 680 pF • • • • • • • • • • • • •
821 820 pF • • • • • • • • • • • • •
102 1000 pF • • • • • • • • • • • • • • • •
122 1200 pF • • • • • • • • • • • • • • • • •
152 1500 pF • • • • • • • • • • • • • • • • •
182 1800 pF • • • • • • • • • • • • • • • • •
222 2200 pF • • • • • • • • • • • • • • • • • •
272 2700 pF • • • • • • • • • • • • • • • • •
332 3300 pF • • • • • • • • • • • • • • • • •
392 3900 pF • • • • • • • • • • • • • • • • •
472 4700 pF • • • • • • • • • • • • • • • • •
562 5600 pF • • • • • • • • • • • • • • • •
682 6800 pF • • • • • • • • • • • • • • • • •
822 8200 pF • • • • • • • • • • • • • • • •
103 0.010 µF • • • • • • • • • • • • • • •
123 0.012 µF • • • • • • • • • • • • •
153 0.015 µF • • • • • • • • • •
183 0.018 µF • • • • • • • • •
223 0.022 µF • • • • • • • • •
273 0.027 µF • • • • • • •
333 0.033 µF • • • • • •
393 0.039 µF • • • •
473 0.047 µF ••
563 0.056 µF •
www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45053
42 Revision: 23-Sep-09
VJ C0G (NP0) Dielectric
Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
- 75 - 50 - 25 0 50 100 125
2.0
1.5
1.0
0.5
0.0
- 0.5
- 1.0
- 1.5
- 2.0
NP0
TEMPERATURE °C
150 175
25 75
% CAPACITANCE CHANGE
TEMPERATURE COEFFICIENT OF CAPACITANCE
TEMPERATURE °C
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 25 100 150
10 000
1000
100
10
50
INSULATION RESISTANCE
(ΩF)
AGING RATE
HOURS
100 1000 10 000
% CAPACITANCE CHANGE
0.2
0.1
0.0
- 0.1
- 0.2
110
0.2
0.1
0.0
- 0.1
- 0.2
DC VOLTS APPLIED
VOLTAGE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
0 10 20 30 40 50 60 70 80 90 100
CHANGE OF CAPACITANCE WITH FREQUENCY
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
2
1
0
-1
-2
+
+
% CAPACITANCE CHANGE
DISSIPATION FACTOR VS. FREQUENCY
FREQUENCY
1 kHz 10 kHz 100 kHz 1 MHz
0.00025
DISSIPATION FACTOR
0.0005
0.001
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
