EURO/SR Standard Size Euro-Style Rocker Switches
ROCKER SWITCHES
1
DESCRIPTION
Field-proven in America’s roughest
off-road applications, the standard
size EURO/SR is one tough and
reliable rocker switch. Available
with the complete range of rugged
one and two-pole, illuminated or
non-illuminated circuits. The
EURO/SR Series offers snap-in
mounting and can be provided
with a durable silicone seal
which resists dust and moisture.
All EURO/SR switches are
molded in an aesthetically
pleasing matte finish and operate
with a crisp tactile feel allowing
for easy actuation. The EURO/SR
will accept loads up to 15A.
Terminal numbers are stamped
on base for easy identification.
SPECIFICATIONS
Ratings:
15A @ 125V ac.
10A @ 250V ac.
3/4 Hp @ 250V ac.
(Hp rating does not apply
to lighted switches.)
CUR marked.
Recommended up to 15A
@ 28V dc.
Circuits:
1PST, 1PDT, 2PST, and 2PDT.
Maintained and momentary action.
Contact Mechanism:
Slow-make/Slow-break
contact mechanism.
Butt action contact mechanism
designed specifically for use
on ac and low voltage
dc applications.
Mechanical Life:
Maintained — 100,000
operations, minimum.
Momentary — 25,000
operations, minimum.
Start with this ...to get to your
Base Circuit Number ...add each appropriate Code Number or Letter... Complete Catalog Number
Base Circuit Mounting Bulb Lamp Rocker Rocker Lens Seal Complete
Catalog Number Frame Voltage Wiring Style Color Color Option Catalog Number
8007K20 N 3 1 4 V 3 2 8007K20N314V32
HOW TO ORDER — EURO/SR
To determine your Complete Catalog Number, you must start with the appropriate Base Circuit Number and add the
appropriate Code Letters and/or Numbers as in the example below:
EURO/SR SELECTION TABLE
Rating
10A
250V ac
15A
125V ac
15A
28V dc
Black N N/A N/A N/A N/A Two Face 1
White
Red
Black
M
T
V
N/A N/A Non-
Sealed
Sealed
1
2
Poles
and
Throw
Circuit with Rocker in
UP CENTER DOWN
Position Position Position
BASE CIRCUIT
Termination Type
.250″Solder Screw
Spade Lugs Terminal
Terminal
1 P.S.T. 2-3 NONE OFF 8006K23 8006K24 8006K25
2-3* 8006K35 8006K36 8006K37
2-3 OFF 2-1 8006K20 8006K21 8006K22
1 P.D.T. 2-3 NONE 2-1 8006K26 8006K27 8006K28
2-3* OFF 2-1 8006K29 8006K30 8006K31
2-3* OFF 2-1* 8006K32 8006K33 8006K34
2 P.S.T. 2-3, 5-6 NONE OFF 8006K43 8006K44 8006K45
2-3, 5-6* 8006K55 8006K56 8006K57
2-3, 5-6 OFF 2-1, 5-4 8006K40 8006K41 8006K42
2 P.D.T. 2-3, 5-6 NONE 2-1, 5-4 8006K46 8006K47 8006K48
2-3, 5-6* OFF 2-1, 5-4 8006K49 8006K50 8006K51
2-3, 5-6* OFF 2-1, 5-4* 8006K52 8006K53 8006K54
2 P.D.T.Q2-3, 5-6 2-3 OFF 8006K58 8006K59 8006K60
2 P.D.T.W5-6 5-3 5-1 8006K61 8006K62 8006K63
10A
250V ac
15A
125V ac
15A
28V dc
Black N
14V dc
18V dc
28V dc
125V R
Neon
250V R
Neon
3
7
4
1
2
Dependent
on Circuit
Independent
of Circuit
1
2
Two Face
w/1 Lens
Two Face
w/2
Lenses E
3
4
White
Red
Black
M
T
V
White
Red
Green
Amber
No
Lens
Blue
1
2
3
4
5
6
Non-
Sealed
Sealed
1
2
1 P.S.T. 2-3 NONE OFF 8007K23 8007K24 8007K25
2-3* OFF NONE 8007K35 8007K36 8007K37
2-3 OFF 2-1 8007K20 8007K21 8007K22
1 P.D.T. 2-3 NONE 2-1 8007K26 8007K27 8007K28
2-3* OFF 2-1 8007K29 8007K30 8007K31
2-3* OFF 2-1* 8007K32 8007K33 8007K34
2 P.S.T. 2-3, 5-6 NONE OFF 8007K43 8007K44 8007K45
2-3, 5-6* OFF NONE 8007K55 8007K56 8007K57
2-3, 5-6 OFF 2-1, 5-4 8007K40 8007K41 8007K42
2 P.D.T.E2-3, 5-6 NONE 2-1, 5-4 8007K46 8007K47 8007K48
2-3, 5-6* OFF 2-1, 5-4 8007K49 8007K50 8007K51
2-3, 5-6* OFF 2-1, 5-4* 8007K52 8007K53 8007K54
CODE LETTERS AND NUMBERS — ADD TO BASE CIRCUIT NUMBER
Mounting Bulb Lamp Rocker Rocker Lens Seal
Frame Voltage Wiring Style Color Color Option
Color Code Voltage Code Type Code Type Code Color Code Color Code Type Code
Type
NON-ILLUMINATED NON-ILLUMINATED
ILLUMINATED ILLUMINATED
*Momentary contact.
Q3A @ 250V ac, 6A @ 125V ac.
W1/4 Hp @ 125-250V ac.
ENot available with lamp wired independent of circuit and provided with (2) lamps and (2) lens only
(use only rocker styles 4 and 9). Note: All double throw circuits both 1 pole and 2 pole require
(2) lamps and (2) lens when lamp wired dependent on circuit. When lamp wired independent of
circuit for 1PDT switches: device is supplied with 1 lamp and (2) lens (lamp centered in
open pole of base).
RAvailable on single pole versions only.
1.30
59-01 Rocker Section 1 part 2 1/26/99 3:56 PM Page 1.30
43.31 ± .31
(1.705)
24.31 ± .31
(.957)
9.88 ± 1.06
(.389) 11.18 ± .13
(.440)
2.44 ± .25
(.096)
27.15 ± .13
(1.069)
6.35 ± .08
(.250)
.813 thick
36.25
(1.427) – .38
+ .51
20.96 ± .13
(.825)
36.85
(1.450)
30.23
(1.190)
21.08
(.830)
17.27 (.680)
R 3.96 ± .25
(R .156)
Panel Opening
Reference Only
Thickness: 1.02 to 3.56
(.040 to .140)
Best Results Obtained From:
2.03 to 3.18
(.080 to .125)
3 2 1
4 5 6
NON-ILLUMINATED
43.31 ± .30
(1.705)
24.31 ± .30
(.957)
9.88 ± 1.06
(.389) 11.18 ± .13
(.440)
2.44 ± .25
(.096)
27.15 ± .13
(1.069)
36.25
(1.427)
20.96 ± .13
(.825)
36.85
(1.450)
30.23
(1.190)
21.08
(.830)
17.27 (.680)
R 3.96 ± .25
(R .156)
Panel Opening
Reference Only
Thickness: 1.02 to 3.56
(.040 to .140)
Best Results Obtained From:
2.03 to 3.18
(.080 to .125)
3 2 1
4 5 6
– .38
+ .51
6.35 ± .08
(.250)
.813 thick
ILLUMINATED
8006K22N1M2
EURO/SR
8007K40N314032
EURO/SR
8007K23N313V11
EURO/SR
8007K24N323V42
EURO/SR
Electrical Life:
25,000 operations min.
at full load.
Terminal Types:
Standard 6.35mm (.250″)
spade — Brass.
Screw — Brass
(terminalscrews
providedunassembled).
Solder — Tintillate
platedbrass.
Base Material:
Thermoset molding material.
Rocker Material:
Thermoplastic rocker
actuators. Different colors are
available. Rocker and bezel are
a high grade nylon supplied
with matte finish.
Lamps:
Five lamp voltages, 14V dc,
18V dc, 28V dc, 125V ac
neon, and 250V ac neon are
offered as standard. For
additional lamp voltages,
please contact your Eaton
Sales Representative.
Dielectric:
1,000V RMS, minimum.
Operating Temperature:
-40°to 85°C
(-40°F to 185°F).
Mounting Means:
Snap-in mounting with
plasticbezel.
Seal:
Available in sealed and
non-sealed versions. Sealed
devices are furnished with
silicone rubber seal providing
moisture and dust resistance.
Lens Part Numbers
(if ordered separately):
Green. . . . . . . . . . . . 28-5415
Amber. . . . . . . . . . 28-5415-2
Red. . . . . . . . . . . . 28-5415-3
Blue. . . . . . . . . . . . 28-5415-4
White. . . . . . . . . . . 28-5415-5
Options:
•Additional colors of rockers
and bezels are available.
•Special circuits.
•Special ratings.
•Pad-printed legends on
rocker and bezel.
•Special voltage bulbs.
•Dry circuit capabilities.
•Foam dust seal.
•Reversing jumpers.
•Printed circuit terminals and
other terminal types.
•Wire leads.
•Dead back cover.
•Industry standard connector:
28-3426. Seepage4.26.
•EURO/SR panel plug:
53-3318. Seepage4.27.
For information on optional
features,contact your Eaton
SalesRepresentative.
Approvals:
UL Recognized and recognized
component for Canada
(CURmarked): FileE2702.
DIMENSIONSAPPROXIMATE IN MM (INCHES)
C
1
1.31
59-01 Rocker Section 1 part 2 1/26/99 3:56 PM Page 1.31
