MP LIA NT Features CO S oH *R Applications 72 V rated Radial leaded devices Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* Agency recognition: 8 RX1 10 4180 S COPAL ELECTRONICS Almost anywhere there is a low voltage power supply, up to 72 V and a load to be protected, including: Security and fire alarm systems Loudspeakers Power transformers PRCP-RX/72 Series - Polymer Resettable Circuit Protectors Electrical Characteristics Initial Resistance 1 Hour (R1) Post-Trip Resistance Amperes at 23 oC Hold Trip Ohms at 23 oC Min. Max. Ohms at 23 oC Max. Amperes at 23 oC Seconds at 23 oC Watts at 23 oC Typ. 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.35 1.60 1.85 2.50 3.00 3.75 1.50 1.00 0.76 0.52 0.41 0.27 0.18 0.14 0.15 0.12 0.09 0.08 0.05 0.04 0.03 4.40 3.00 2.10 1.29 1.17 0.72 0.60 0.47 0.38 0.30 0.22 0.19 0.13 0.10 0.08 1.0 1.25 1.5 2.0 2.5 3.25 3.75 4.5 5.5 6.75 8.0 9.25 12.5 15.0 18.75 2.2 2.5 3.0 3.9 4.0 5.3 6.3 7.2 8.2 9.6 11.4 12.6 15.6 19.8 24.0 0.40 0.45 0.50 0.55 0.75 0.90 0.90 1.00 1.50 1.70 1.90 2.10 2.50 2.80 3.20 Ihold Model V max. Volts I max. Amps PRCP-RX020/72 PRCP-RX025/72 PRCP-RX030/72 PRCP-RX040/72 PRCP-RX050/72 PRCP-RX065/72 PRCP-RX075/72 PRCP-RX090/72 PRCP-RX110/72 PRCP-RX135/72 PRCP-RX160/72 PRCP-RX185/72 PRCP-RX250/72 PRCP-RX300/72 PRCP-RX375/72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 Itrip 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 2.20 2.70 3.20 3.70 5.00 6.00 7.50 2.84 1.95 1.36 0.86 0.77 0.48 0.40 0.31 0.25 0.19 0.14 0.12 0.08 0.06 0.05 Max. Time To Trip Tripped Power Dissipation Environmental Characteristics Operating/Storage Temperature ........................-40 C to +85 C Maximum Device Surface Temperature in Tripped State ................................................125 C Passive Aging......................................................+85 C, 1000 hours ....................................5 % typical resistance change Humidity Aging....................................................+85 C, 85 % R.H. 1000 hours ..................5 % typical resistance change Thermal Shock ....................................................+85 C to -55 C, 10 times ........................10 % typical resistance change Solvent Resistance ............................................MIL-STD-202, Method 215 ........................No change Vibration ..............................................................MIL-STD-883C, Method 2007.1, ................No change Condition A Test Procedures And Requirements For Model PRCP-RX/72 Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................Verify dimensions and materials ................Per PRCP physical description Resistance ..........................................................In still air @ 23 C ........................................Rmin b R b Rmax Time to Trip ........................................................5 times Ihold, Vmax, 23 C ........................T b max. time to trip (seconds) Hold Current ......................................................30 min. at Ihold ..........................................No trip Trip Cycle Life ....................................................Vmax, Imax, 100 cycles ..............................No arcing or burning Trip Endurance....................................................Vmax, 48 hours ..........................................No arcing or burning UL File Number ..................................................E300792 CSA File Number ....................................................CA1730526 TUV Certificate Number...........................................R 50075506 * RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Additional Features Resettable circuit protection Bulk packaging, tape and reel available on most models PRCP-RX/72 Series - Polymer Resettable Circuit Protectors COPAL ELECTRONICS Product Dimensions Model PRCP-RX020/72 PRCP-RX025/72 PRCP-RX030/72 PRCP-RX040/72 PRCP-RX050/72 PRCP-RX065/72 PRCP-RX075/72 PRCP-RX090/72 PRCP-RX110/72 PRCP-RX135/72 PRCP-RX160/72 PRCP-RX185/72 PRCP-RX250/72 PRCP-RX300/72 PRCP-RX375/72 A Max. 7.4 0.291 7.4 0.291 7.4 0.291 7.40 0.291 7.9 0.311 9.7 0.382 10.4 0.409 11.7 0.461 10.84 (0.427) 12.26 (0.483) 13.94 (0.549) 15.18 (0.598) 17.84 (0.702) 20.67 (0.814) 23.51 (0.926) B Max. 12.7 0.5 12.7 0.5 13.4 0.528 13.7 0.539 13.7 0.539 15.2 0.598 16.0 0.630 16.70 0.657 16.8 (0.663) 18.3 (0.720) 19.9 (0.785) 21.2 (0.834) 23.8 (0.939) 26.7 (1.050) 29.6 (1.162) C Nom. 5.1 0.201 5.1 0.201 5.1 0.201 5.1 0.201 5.1 0.201 5.1 0.201 5.1 0.201 5.1 0.201 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) D Min. 7.6 0.299 7.6 0.299 7.6 0.299 7.6 0.299 7.6 0.299 7.6 0.299 7.6 0.299 7.6 0.299 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) Tol. 0.7 0.028 0.7 0.028 0.7 0.028 0.7 0.028 0.7 0.028 0.7 0.028 0.7 0.028 0.7 0.028 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) E Max. 3.1 0.122 3.1 0.122 3.1 0.122 3.1 0.122 3.1 0.122 3.1 0.122 3.1 0.122 3.1 0.122 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) Physical Characteristics Style Lead Dia. Material 0.51 1 Sn/CuFe 0.020 0.51 1 Sn/CuFe 0.020 0.51 1 Sn/CuFe 0.020 0.51 1 Sn/CuFe 0.020 0.51 1 Sn/Cu 0.020 0.51 1 Sn/Cu 0.020 0.51 1 Sn/Cu 0.020 0.51 1 Sn/Cu 0.020 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) MM Packaging options: DIMENSIONS = (INCHES) BULK: 500 pcs. per bag. TAPE & REEL: PRCP-RX020/72-2 ~ PRCP-RX090/72-2 = 3000 pcs. per reel; PRCP-RX110/72-2 ~ PRCP-RX160/72-2 = 1500 pcs. per reel; PRCP-RX185/72-2 - PRCP-RX375/72-2 = 1000 pcs. per reel. Style 2 Style 1 A E Typical Part Marking:RX020/72-RX025/72 A E How to Order Represents total content. Layout may vary. PRCP - RX 110/72 - 2 PART IDENTIFICATION B B MANUFACTURER'S MARK RX025 5A DATE CODE: WEEK 1 OF 2005 = 5A (YEAR & WEEK) WEEK 27 OF 2005 = A5 (WEEK & YEAR) Typical Part Marking:RX030/72-RX375/72 D Represents total content. Layout may vary. D C C PART IDENTIFICATION DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. RX110 5180S MANUFACTURER'S MARK Product Designator Series RX = Radial Leaded Component Hold Current, Ihold 020-375 (0.20 Amps - 3.75 Amps) Maximum Voltage, Vmax 72 (72 Volts) Packaging Options - 0 = Bulk Packaging - 2 = Tape and Reel* *Packaged per EIA 486-B LOT NO. (S = CHINA) PRCP-RX/72 Series - Polymer Resettable Circuit Protectors COPAL ELECTRONICS PR CP PR -RX02 CP 0 PR -RX0 /72 CP 25/ PR RX0 72 CP 30 PR -RX0 /72 40/ CP PR RX0 72 CP 50 PR -RX06 /72 CP 5 PR -RX07 /72 CP -RX 5/72 090 /72 PR CP PR -RX1 CP 10 PR -RX1 /72 CP 35 PR -RX1 /72 CP 60/ 72 R PR CP X185 PR -RX2 /72 CP 50 PR -RX3 /72 CP 0 -RX 0/72 375 /72 Typical Time to Trip at 23 oC 1000 100 Time to Trip (Seconds) Time to trip (Seconds) 100 10 1 0.1 10 1 0.1 0.01 0.01 0.001 0.001 0.1 1 10 100 1 10 100 Fault Current (Amps) Fault Current (Amps) The Time to Trip curves represent typical performance of a device in a simulated application environment. Actual performance in specific customer applications may differ from these values due to the influence of other variables. Thermal Derating Chart - Ihold (Amps) Ambient Operating Temperature Model PRCP-RX020/72 PRCP-RX025/72 PRCP-RX030/72 PRCP-RX040/72 PRCP-RX050/72 PRCP-RX065/72 PRCP-RX075/72 PRCP-RX090/72 PRCP-RX110/72 PRCP-RX135/72 PRCP-RX160/72 PRCP-RX185/72 PRCP-RX250/72 PRCP-RX300/72 PRCP-RX375/72 -40 oC 0.31 0.39 0.47 0.62 0.78 1.01 1.16 1.40 1.71 2.09 2.48 2.87 3.88 4.65 5.81 -20 oC 0.27 0.34 0.41 0.54 0.68 0.88 1.02 1.22 1.50 1.84 2.18 2.52 3.40 4.08 5.10 0 oC 0.24 0.30 0.36 0.48 0.60 0.77 0.89 1.07 1.31 1.61 1.90 2.20 2.98 3.57 4.46 23 oC 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.35 1.60 1.85 2.50 3.00 3.75 40 oC 0.16 0.20 0.24 0.32 0.41 0.53 0.61 0.73 0.89 1.09 1.30 1.50 2.03 2.43 3.04 50 oC 0.14 0.18 0.22 0.29 0.36 0.47 0.54 0.65 0.79 0.97 1.15 1.33 1.80 2.16 2.70 60 oC 0.13 0.16 0.19 0.25 0.32 0.41 0.47 0.57 0.69 0.85 1.01 1.17 1.58 1.89 2.36 70 oC 0.11 0.14 0.16 0.22 0.27 0.35 0.41 0.49 0.59 0.73 0.86 1.00 1.35 1.62 2.03 85 oC 0.08 0.10 0.12 0.16 0.20 0.26 0.30 0.36 0.44 0.54 0.64 0.74 1.00 1.20 1.50 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. COPAL ELECTRONICS PRCP-RX/72 Series Tape and Reel Specifications Devices taped using EIA468-B/IEC286-2 standards. See table below and Figures 1 and 2 for details. Dimensions Dimensions Tolerance Dimension Description IEC Mark EIA Mark Carrier tape width W W Hold down tape width: W0 W4 W2 W6 3 (.118) max. 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) -0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02) Hold down tape Top distance between tape edges 18 (.709) 11 (.433) min. No protrusion Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 Overall width w/o lead protrusion (kinked lead) C2 Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold tape I2 I2 Not specified Sprocket hole pitch P0 P0 12.7 (0.5) Pitch tolerance Device pitch: PRCP-RX020/72-PRCP-RX185/72 Device pitch: PRCP-RX250/72-PRCP-RX375/72 Tape thickness Tape thickness with splice: -0.5/+1.0 (-0.02/+.039) t PRCP-RX020/72-PRCP-RX185/72 max. max. max. max. max. max. max. 20 consecutive 0.3 (.012) 1 (.039) 12.7 (0.5) 0.3 (.012) 25.4 (1.0) 0.6 (.024) t1 0.9 (.035) 1.5 (.059) max. t1 2.3 (.091) max. t Tape thickness with splice: PRCP-RX250/72-PRCP-RX375/72 max. Splice sprocket hole alignment 0 Body lateral deviation $h $h Body tape plane deviation $p $p Lead spacing F F Reel width w W2 Reel diameter d a Space between flanges less device W1 h 0 0 5.08 (0.2) 56 (2.205) 370 (14.57) 4.75 (.187) max. 0.3 (.012) 1.0 (.039) 1.3 (.051) 0.2 (.008) max. max. 3.25 (.128) DIMENSIONS = Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) COPAL ELECTRONICS PRCP-RX/72 Series Tape and Reel Specifications IEC Mark Dimension Description Dimensions Dimensions Tolerance EIA Mark Arbor hole diameter f c 26 (1.024) 12.0 (.472) Core diameter h n 80 (3.15) max. 64 (2.52) Box Consecutive missing places 372 (14.6) 372 (14.6) max. 3 Empty places per reel max. Not specified Taped Component Dimensions - Figure 1 p h h p Reference plane P1 H1 A L I2 H1 F I1 H0 B P0 W0 D0 H DIMENSIONS = W1 MM (INCHES) W User direction of feed Cross section A - B Reel Dimensions - Figure 2 t Reel h d User direction of feed Upper side Tape Lower side f h w Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Revision History Date Rev. Reason 12/20/2005 A Initial issue 03/13/2006 B Updated TUV File Number 03/30/2006 C Updated UL, CSA File Number 12/21/2007 D Added RX020/72 to RX090/72 model 07/15/2011 E Updated Typical Part Marking 10/02/2013 F Updated Tape and Reel Specifications COPAL ELECTRONICS NIDEC COPAL ELECTRONICS CORP. Japan Head Office Nishi-Shinjuku, Kimuraya Bldg., 7-5-25 Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023 Phone: +81-3-3364-7055 Fax: +81-3-3364-7098 www.nidec-copal-electronics.com Revision : F Issue date : 10/02/13 PRCP-RX/72 SERIES Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.