1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
2OUT
VCC
2IN-
2IN+
1IN-
1IN+
OUT3
OUT4
GND
4IN+
4IN-
3IN+
3IN-
LM139, LM139A . . . D, J, OR W PACKAGE
LM239 . . . D, N, OR PW PACKAGE
LM239A . . . D PACKAGE
LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE
LM2901 . . . D, N, NS, OR PW PACKAGE
(TOP VIEW)
3 2 1 20 19
9 10 11 12 13
4
5
6
7
8
18
17
16
15
14
GND
NC
4IN+
NC
4IN-
VCC
NC
2IN-
NC
2IN+
2OUT
1OUT
NC
3IN-
3IN+
3OUT
4OUT
1IN-
1IN+
NC
LM139, LM139A . . . FK PACKAGE
(TOP VIEW)
NC - No inter nal connection
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S OCTOBER 1979REVISED AUGUST 2012
QUAD DIFFERENTIAL COMPARATORS
Check for Samples: LM139,LM239,LM339,LM139A,LM239A,LM339A,LM2901,LM2901AV,LM2901V
1FEATURES
Wide Supply Ranges Low Input Bias Current: 25 nA (Typ)
Single Supply: 2 V to 36 V Low Input Offset Current: 3 nA (Typ) (LM139)
(Tested to 30 V for Non-V Devices and 32 V Low Input Offset Voltage: 2 mV (Typ)
for V-Suffix Devices) Common-Mode Input Voltage Range Includes
Dual Supplies: ±1 V to ±18 V Ground
(Tested to ±15 V for Non-V Devices and Differential Input Voltage Range Equal to
±16 V for V-Suffix Devices) Maximum-Rated Supply Voltage: ±36 V
Low Supply-Current Drain Independent of Low Output Saturation Voltage
Supply Voltage: 0.8 mA (Typ) Output Compatible With TTL, MOS, and CMOS
DESCRIPTION/ORDERING INFORMATION
These devices consist of four independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference
between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-
collector outputs to achieve wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to
125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and LM339A
are characterized for operation from 0°C to 70°C. The LM2901, LM2901AV, and LM2901V are characterized for
operation from –40°C to 125°C.
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright © 1979–2012, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas On products compliant to MIL-PRF-38535, all parameters are
Instruments standard warranty. Production processing does not tested unless otherwise noted. On all other products, production
necessarily include testing of all parameters. processing does not necessarily include testing of all parameters.
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S OCTOBER 1979REVISED AUGUST 2012
www.ti.com
Table 1. ORDERING INFORMATION(1)
VIOmax ORDERABLE TOP-SIDE
TAMAX VCC PACKAGE(2)
AT 25°C PART NUMBER MARKING
PDIP N Tube of 25 LM339N LM339N
Tube of 50 LM339D
SOIC D LM339DR LM339
Reel of 2500 LM339DRG3
5 mV 30 V SOP NS Reel of 2000 LM339NSR LM339
SSOP DB Reel of 2000 LM339DBR LM339
Tube of 90 LM339PW
TSSOP PW L339
0°C to 70°C Reel of 2000 LM339PWRG3
PDIP N Tube of 25 LM339AN LM339AN
Tube of 50 LM339AD
SOIC D LM339A
Reel of 2500 LM339ADR
2 mV 30 V SOP NS Reel of 2000 LM339ANSR LM339A
SSOP DB Reel of 2000 LM339ADBR L339A
Tube of 90 LM339APW
TSSOP PW L339A
Reel of 2000 LM339APWR
PDIP N Tube of 25 LM239N LM239N
Tube of 50 LM239D
SOIC D LM239DR LM239
5 mV 30 V Reel of 2500 LM239DRG3
–25°C to 85°C Tube of 90 LM239PW
TSSOP PW L239
Reel of 2000 LM239PWR
Tube of 50 LM239AD
2 mV 30 V SOIC D LM239A
Reel of 2500 LM239ADR
PDIP N Tube of 25 LM2901N LM2901N
Tube of 50 LM2901D
SOIC D LM2901DR LM2901
Reel of 2500
7 mV 30 V LM2901DRG3
SOP NS Reel of 2000 LM2901NSR LM2901
–40°C to 125°C Tube of 90 LM2901PW
TSSOP PW L2901
Reel of 2000 LM2901PWRG3
SOIC D Reel of 2500 LM2901VQDR L2901V
7 mV 32 V TSSOP PW Reel of 2000 LM2901VQPWR L2901V
SOIC D Reel of 2500 LM2901AVQDR L2901AV
2 mV 32 V TSSOP PW Reel of 2000 LM2901AVQPWR L2901AV
CFP W Tube of 25 LM139W LM139W
CDIP J Tube of 25 LM139J LM139J
5 mV 30 V LCCC FK Tube of 55 LM139FK LM139FK
Tube of 50 LM139D
SOIC D LM139
Reel of 2500 LM139DR
–55°C to 125°C CFP W Tube of 25 LM139AW LM139AW
CDIP J Tube of 25 LM139AJ LM139AJ
2 mV 30 V LCCC FK Tube of 55 LM139AFK LM139AFK
Tube of 50 LM139AD
SOIC D LM139AD
Reel of 2500 LM139ADR
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
2Submit Documentation Feedback Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
80-µA
Current
Regulator
80 µA
GND
OUT
VCC
10 µA
60 µA
10 µA
IN+
IN−
All current values shown are nominal.
OUT
IN−
IN+
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S OCTOBER 1979REVISED AUGUST 2012
SYMBOL (EACH COMPARATOR)
SCHEMATIC (EACH COMPARATOR)
Copyright © 1979–2012, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S OCTOBER 1979REVISED AUGUST 2012
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT
VCC Supply voltage(2) 36 V
VID Differential input voltage(3) ±36 V
VIInput voltage range (either input) –0.3 36 V
VOOutput voltage 36 V
IOOutput current 20 mA
Duration of output short circuit to ground(4) Unlimited
D package 86
DB package 96
θJA Package thermal impedance, junction to free air(5) (6) N package 80 °C/W
NS package 76
PW package 113
FK package 5.61
θJC Package thermal impedance, junction to case(7) (8) J package 15.05 °C/W
W package 14.65
TJOperating virtual-junction temperature 150 °C
Case temperature for 60 s FK package 260 °C
Lead temperature 1,6 mm (1/16 in) from case for 60 s J package 300 °C
Tstg Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to network ground.
(3) Differential voltages are at IN+ with respect to IN–.
(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD= (TJ(max) TA)/θJA. Operating at the absolute maximum TJof 150°C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
(7) Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD= (TJ(max) TC)/θJC. Operating at the absolute maximum TJof 150°C can affect reliability.
(8) The package thermal impedance is calculated in accordance with MIL-STD-883.
4Submit Documentation Feedback Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S OCTOBER 1979REVISED AUGUST 2012
ELECTRICAL CHARACTERISTICS
at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM139 LM139A
PARAMETER TEST CONDITIONS(1) TA(2) UNIT
MIN TYP MAX MIN TYP MAX
VCC = 5 V to 30 V, 25°C 2 5 1 2
VIO Input offset voltage VIC = VICR min, mV
Full range 9 4
VO= 1.4 V 25°C 3 25 3 25
IIO Input offset current VO= 1.4 V nA
Full range 100 100
25°C –25 –100 –25 –100
IIB Input bias current VO= 1.4 V nA
Full range –300 –300
0 to 0 to
25°C VCC 1.5 VCC 1.5
Common-mode input-
VICR V
voltage range(3) 0 to 0 to
Full range VCC 2 VCC 2
Large-signal differential- VCC+ = ±7.5 V,
AVD 25°C 200 50 200 V/mV
voltage amplification VO= –5 V to 5 V
VOH = 5 V 25°C 0.1 0.1 nA
IOH High-level output current VID = 1 V VOH = 30 V Full range 1 1 μA
25°C 150 400 150 400
VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV
Full range 700 700
IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA
Supply current
ICC VO= 2.5 V, No load 25°C 0.8 2 0.8 2 mA
(four comparators)
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input
voltage, unless otherwise specified.
(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-
mode voltage range is VCC+ 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long
as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.
SWITCHING CHARACTERISTICS
VCC = 5 V, TA= 25°C LM139
LM139A
PARAMETER TEST CONDITIONS UNIT
TYP
100-mV input step with 5-mV overdrive 1.3
RLconnected to 5 V through 5.1 k,
Response time μs
CL= 15 pF(1) (2) TTL-level input step 0.3
(1) CLincludes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Copyright © 1979–2012, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S OCTOBER 1979REVISED AUGUST 2012
www.ti.com
ELECTRICAL CHARACTERISTICS
at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM239 LM239A
LM339 LM339A
PARAMETER TEST CONDITIONS(1) TA(2) UNIT
MIN TYP MAX MIN TYP MAX
VCC = 5 V to 30 V, 25°C 2 5 1 3
VIO Input offset voltage VIC = VICR min, mV
Full range 9 4
VO= 1.4 V 25°C 5 50 5 50
IIO Input offset current VO= 1.4 V nA
Full range 150 150
25°C –25 –250 –25 –250
IIB Input bias current VO= 1.4 V nA
Full range –400 –400
0 to 0 to
25°C VCC 1.5 VCC 1.5
Common-mode input-
VICR V
voltage range(3) 0 to 0 to
Full range VCC 2 VCC 2
VCC = 15 V,
Large-signal differential-
AVD VO= 1.4 V to 11.4 V, 25°C 50 200 50 200 V/mV
voltage amplification RL15 kto VCC
VOH = 5 V 25°C 0.1 50 0.1 50 nA
IOH High-level output current VID = 1 V VOH = 30 V Full range 1 1 μA
25°C 150 400 150 400
VOL Low-level output voltage VID = –1 V, IOL = 4 mA mV
Full range 700 700
IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 6 16 mA
Supply current
ICC VO= 2.5 V, No load 25°C 0.8 2 0.8 2 mA
(four comparators)
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM239/LM239A is –25°C to 85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are measured
with zero common-mode input voltage, unless otherwise specified.
(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-
mode voltage range is VCC+ 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long
as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.
SWITCHING CHARACTERISTICS
VCC = 5 V, TA= 25°C LM239
LM239A
LM339
PARAMETER TEST CONDITIONS UNIT
LM339A
TYP
100-mV input step with 5-mV overdrive 1.3
RLconnected to 5 V through 5.1 k,
Response time μs
CL= 15 pF(1) (2) TTL-level input step 0.3
(1) CLincludes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
6Submit Documentation Feedback Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S OCTOBER 1979REVISED AUGUST 2012
ELECTRICAL CHARACTERISTICS
at specified free-air temperature, VCC = 5 V (unless otherwise noted) LM2901
PARAMETER TEST CONDITIONS(1) TA(2) UNIT
MIN TYP MAX
25°C 2 7
Non-A devices
VIC = VICR min, Full range 15
VIO Input offset voltage VO= 1.4 V, mV
25°C 1 2
VCC = 5 V to MAX(3) A-suffix devices Full range 4
25°C 5 50
IIO Input offset current VO= 1.4 V nA
Full range 200
25°C –25 –250
IIB Input bias current VO= 1.4 V nA
Full range –500
0 to
25°C VCC 1.5
Common-mode input-
VICR V
voltage range(4) 0 to
Full range VCC 2
Large-signal differential- VCC = 15 V, VO= 1.4 V to 11.4 V,
AVD 25°C 25 100 V/mV
voltage amplification RL15 kto VCC VOH = 5 V 25°C 0.1 50 nA
IOH High-level output current VID = 1 V VOH = VCC MAX(3) Full range 1 μA
Non-V devices 150 500
25°C
VID = –1 V,
VOL Low-level output voltage V-suffix devices 150 400 mV
IOL = 4 mA All devices Full range 700
IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C 6 16 mA
VCC = 5 V 0.8 2
Supply current VO= 2.5 V,
ICC 25°C mA
(four comparators) No load VCC = MAX(3) 1 2.5
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless
otherwise specified.
(3) VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices
(4) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-
mode voltage range is VCC+ 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long
as the other input remains in the common-mode range. Either or both inputs can go to VCC MAX without damage.
SWITCHING CHARACTERISTICS
VCC = 5 V, TA= 25°C LM2901
PARAMETER TEST CONDITIONS UNIT
TYP
100-mV input step with 5-mV overdrive 1.3
RLconnected to 5 V through 5.1 k,
Response time μs
CL= 15 pF(1) (2) TTL-level input step 0.3
(1) CLincludes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Copyright © 1979–2012, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
0.001
0.01
0.1
1
10
0.01 0.1 1 10 100
IO Output Sink Current mA
VO Saturation Voltage V
T = –55°C
A
T = 25°C
A
T = 125°C
A
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
0 5 10 15 20 25 30 35
VCC Supply Voltage V
ICC Supply Current mA
T = –55°C
A
T = 0°C
A
T = 25°C
A
T = 70°C
A
T = 125°C
A
0
10
20
30
40
50
60
70
80
0 5 10 15 20 25 30 35
VCC Supply Voltage V
IIN Input Bias Current nA
T = –55°C
A
T = 0°C
A
T = 25°C
A
T = 70°C
A
T = 125°C
A
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S OCTOBER 1979REVISED AUGUST 2012
www.ti.com
TYPICAL CHARACTERISTICS
SUPPLY CURRENT INPUT BIAS CURRENT
vs vs
SUPPLY VOLTAGE SUPPLY VOLTAGE
OUTPUT SATURATION VOLTAGE
8Submit Documentation Feedback Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
Overdrive = 5 mV
Overdrive = 100 mV
Overdrive = 20 mV
-1
0
1
2
3
4
5
6
-0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25
t Time µs
VO Output Voltage V
Overdrive = 5 mV
Overdrive = 100 mV
Overdrive = 20 mV
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S OCTOBER 1979REVISED AUGUST 2012
TYPICAL CHARACTERISTICS (continued)
RESPONSE TIME FOR VARIOUS OVERDRIVES RESPONSE TIME FOR VARIOUS OVERDRIVES
NEGATIVE TRANSITION POSITIVE TRANSITION
Copyright © 1979–2012, Texas Instruments Incorporated Submit Documentation Feedback 9
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S OCTOBER 1979REVISED AUGUST 2012
www.ti.com
REVISION HISTORY
Changes from Revision R (July 2010) to Revision S Page
Updated ORDERING INFORMATION table. ........................................................................................................................ 2
10 Submit Documentation Feedback Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
5962-7700801VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
5962-87739012A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-8773901CA ACTIVE CDIP J 14 1 TBD Call TI Call TI
5962-8773901DA ACTIVE CFP W 14 1 TBD Call TI Call TI
5962-9673802V9B ACTIVE XCEPT KGD 0 100 TBD Call TI N / A for Pkg Type
5962-9673802VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
77008012A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
7700801CA ACTIVE CDIP J 14 1 TBD Call TI Call TI
7700801DA ACTIVE CFP W 14 1 TBD Call TI Call TI
JM38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM139AD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM139ADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM139ADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM139ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM139AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM139AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM139AJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM139AN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM139AW ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
LM139AWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
LM139D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM139DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM139DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM139DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM139FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM139FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM139J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM139JB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
LM139N OBSOLETE PDIP N 14 TBD Call TI Call TI
LM139W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
LM139WB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
LM239AD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239ADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239ADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239ADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239AN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM239D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239DRG3 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM239DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM239NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM239PW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239PWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM239PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901AVQDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901AVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901AVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901AVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901DRG3 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM2901DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 4
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM2901NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM2901NSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901NSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901NSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901PW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM2901PWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901PWRE4 ACTIVE TSSOP PW 14 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM2901PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901QD OBSOLETE SOIC D 14 TBD Call TI Call TI
LM2901QN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM2901VQDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901VQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901VQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM2901VQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339AD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 5
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM339ADBR ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339ADE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339ADG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339ADR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM339ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM339ANSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339APW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339APWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 6
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM339DBR ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339DRG3 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM339DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM339NE3 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU SN N / A for Pkg Type
LM339NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
LM339NSLE OBSOLETE SO NS 14 TBD Call TI Call TI
LM339NSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339NSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339PW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM339PWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 7
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
LM339PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU SN Level-1-260C-UNLIM
LM339PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
LM339Y OBSOLETE 0 TBD Call TI Call TI
M38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM139, LM139-SP, LM239A, LM2901, LM2901AV, LM2901V :
Catalog: LM139
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 8
Automotive: LM239A-Q1, LM2901-Q1, LM2901AV-Q1, LM2901V-Q1
Enhanced Product: LM239A-EP
Space: LM139-SP
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Enhanced Product - Supports Defense, Aerospace and Medical Applications
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
LM139ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM139DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM239ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM239ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM239DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM239DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM239DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM239DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM239PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2901AVQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2901DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2901DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2901DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2901DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM2901NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM2901PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2901PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM2901PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 1
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
LM2901PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM2901VQPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM339ADBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
LM339ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM339ADR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM339ANSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM339APWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM339DBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
LM339DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM339DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM339DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM339DRG4 SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
LM339NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
LM339PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
LM339PWR TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM339PWRG3 TSSOP PW 14 2000 330.0 12.4 7.0 5.6 1.6 8.0 12.0 Q1
LM339PWRG4 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
*All dimensions are nominal
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 2
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM139ADR SOIC D 14 2500 367.0 367.0 38.0
LM139DR SOIC D 14 2500 367.0 367.0 38.0
LM239ADR SOIC D 14 2500 333.2 345.9 28.6
LM239ADR SOIC D 14 2500 367.0 367.0 38.0
LM239DR SOIC D 14 2500 367.0 367.0 38.0
LM239DR SOIC D 14 2500 333.2 345.9 28.6
LM239DRG4 SOIC D 14 2500 367.0 367.0 38.0
LM239DRG4 SOIC D 14 2500 333.2 345.9 28.6
LM239PWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2901AVQPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2901DR SOIC D 14 2500 333.2 345.9 28.6
LM2901DR SOIC D 14 2500 367.0 367.0 38.0
LM2901DRG4 SOIC D 14 2500 333.2 345.9 28.6
LM2901DRG4 SOIC D 14 2500 367.0 367.0 38.0
LM2901NSR SO NS 14 2000 367.0 367.0 38.0
LM2901PWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2901PWR TSSOP PW 14 2000 364.0 364.0 27.0
LM2901PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
LM2901PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
LM2901VQPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM339ADBR SSOP DB 14 2000 367.0 367.0 38.0
LM339ADR SOIC D 14 2500 333.2 345.9 28.6
LM339ADR SOIC D 14 2500 367.0 367.0 38.0
LM339ANSR SO NS 14 2000 367.0 367.0 38.0
LM339APWR TSSOP PW 14 2000 367.0 367.0 35.0
LM339DBR SSOP DB 14 2000 367.0 367.0 38.0
LM339DR SOIC D 14 2500 367.0 367.0 38.0
LM339DR SOIC D 14 2500 333.2 345.9 28.6
LM339DRG4 SOIC D 14 2500 333.2 345.9 28.6
LM339DRG4 SOIC D 14 2500 367.0 367.0 38.0
LM339NSR SO NS 14 2000 367.0 367.0 38.0
LM339PWR TSSOP PW 14 2000 367.0 367.0 35.0
LM339PWR TSSOP PW 14 2000 364.0 364.0 27.0
LM339PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
LM339PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 3
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
Gage Plane
8,20
7,40
0,55
0,95
0,25
38
12,90
12,30
28
10,50
24
8,50
Seating Plane
9,907,90
30
10,50
9,90
0,38
5,60
5,00
15
0,22
14
A
28
1
2016
6,50
6,50
14
0,05 MIN
5,905,90
DIM
A MAX
A MIN
PINS **
2,00 MAX
6,90
7,50
0,65 M
0,15
0°ā8°
0,10
0,09
0,25
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated