SF1192B * * * * RF Filter for Mobile Communication Applications No Matching Circuit Required 3.0 x 3.0 x 1.3 mm Package Complies with Directive 2011/65/EU (RoHS) 1842.5 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Input Power +10 dBm DC voltage between Terminals 0 VDC Operable Temperature Range -45 to +125 C Storage Temperature -40 to +85 C Suitable for lead-free soldering - Max Soldering Temperature 260C for 30 s SM3030-6 Electrical Characteristics Characteristic Sym Nominal Operating Frequency Passband Insertion Loss across Fc+/ -37.5 MHz Notes Min Max Units 1842.5 IL 2.2 3.8 dB 1.3 2.3 dB Amplitude Ripple p-p across Fc+/ -37.5 MHz Attenuation Typ fC MHz 1542.5 ~ 1600 MHZ 20.0 24.5 dB 1600 ~ 1710 MHZ 22.0 25.0 dB 1710 ~ 1785 MHZ 10.0 23.5 dB 1920 ~ 2142.5 MHZ 25.0 28.0 dB VSWR across Fc +/ -37.5 MHz 1.9 Source impedance ZS 50 Load impedance ZL 50 Specification Temperature Range TA Case Style 2.6 +85 -30 C SM3030-6 3 x 3 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=Shift) 454 YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces Per Reel Reel Size 13 Inch 3000 Pieces Per Reel Electrical Connections Connection Input Terminals 2 Output 5 Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. 2. 3. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. The design, manufacturing process, and specifications of this filter are subject to change. 4. 5. 6. Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF1192B (R) 1/24/18 Page 1 of 5 Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd www.murata.com Frequency Characteristics: Transfer Function Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF1192B (R) 1/24/18 Page 2 of 5 www.murata.com Reflections Functions: S11 S11 VSWR VSWR S22 S22 VSWR VSWR Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF1192B (R) 1/24/18 Page 3 of 5 www.murata.com Tape and Reel Specifications "B" REF. 100 REF. "B " Nominal Size Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 .2 2.0 4.0 A 1.5 RO.3 (MAX.) 1.75 0.3 20 2.0 454 YWWS 3.35 B 3.35 12.0 5.5 Pin 1 B 8.0 A 1.4 R0.5 (TYP.) 1.5 SECTION A-A SECTION B-B Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF1192B (R) 1/24/18 Page 4 of 5 www.murata.com SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case Dimensions Dimension Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 A B C D E F G H I J mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Electrical Connections Port 1 Port 2 Connection Terminals Single Ended Input 2 Single Ended Output 5 Ground All others Single Ended Operation Only Dot indicates Pin 1 TOP VIEW BOTTOM VIEW B 6 1 3 454 YWWS A 2 G C 5 E 4 D Copyright (c) Murata Manufacturing Co., Ltd. All rights reserved. March 2014 SF1192B (R) 1/24/18 Page 5 of 5 F H 6 1 5 2 4 3 I J www.murata.com