Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF1192B (R) 1/24/18 Page 1 of 5 www.murata.com
Electrical Characteristics
Electrical Connections
Characteristic Sym Notes Min Typ Max Units
Nominal Operating Frequency fC1842.5 MHz
Passband Insertion Loss across Fc+/ -37.5 MHz IL 2.2 3.8 dB
Amplitude Ripple p-p across Fc+/ -37.5 MHz 1.3 2.3 dB
Attenuation 1542.5 ~ 1600 MHZ 20.0 24.5 dB
1600 ~ 1710 MHZ 22.0 25.0 dB
1710 ~ 1785 MHZ 10.0 23.5 dB
1920 ~ 2142.5 MHZ 25.0 28.0 dB
VSWR across Fc +/ -37.5 MHz 1.9 2.6
Source impedance ZS50
Load impedance ZL50
Specification Temperature Range TA-30 +85 °C
Case Style SM3030-6 3 x 3 mm Nominal Footprint
Lid Symbolization (Y=year, WW=week, S=Shift) 454 YWWS
Standard Reel Quantity Reel Size 7 Inch 500 Pieces Per Reel
Reel Size 13 Inch 3000 Pieces Per Reel
Connection Terminals
Input 2
Output 5
Ground All others
SM3030-6
• RF Filter for Mobile Communication Applications
• No Matching Circuit Required
• 3.0 x 3.0 x 1.3 mm Package
• Complies with Directive 2011/65/EU (RoHS)
Absolute Maximum Ratings
Rating Value Units
Maximum Input Power +10 dBm
DC voltage between Terminals 0 VDC
Operable Temperature Range -45 to +125 °C
Storage Temperature -40 to +85 °C
Suitable for lead-free soldering - Max Soldering Temperature 260°C for 30 s
1842.5 MHz
SAW Filter
SF1192B
1. Unless noted otherwise, all specifications apply over the operating tem-
perature range with filter soldered to the specified demonstration board
with impedance matching to 50 and measured with 50 network ana-
lyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the
nominal center frequency, fc.
3. The design, manufacturing process, and specifications of this filter are
subject to change.
4. Either Port 1 or Port 2 may be used for either input or output in the design.
However, impedances and impedance matching may vary between Port 1
and Port 2, so that the filter must always be installed in one direction per
the circuit design.
5. US and international patents may apply.
6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered
trademarks of Murata Manufacturing Co., Ltd
Pb
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
NOTES:
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF1192B (R) 1/24/18 Page 2 of 5 www.murata.com
Frequency Characteristics:
Transfer Function
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF1192B (R) 1/24/18 Page 3 of 5 www.murata.com
Reflections Functions:
S11 VSWR
S22 VSWR
S11 VSWR
S22 VSWR
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF1192B (R) 1/24/18 Page 4 of 5 www.murata.com
Tape and Reel Specifications
“B “
Nominal Size Quantity
Per Reel
Inches millimeters
7178500
13 330 3000
See Detail "A"
13.0
20.2
2.0
12.0
100 REF.
"B" REF.
RO.3
(MAX.)
1.4
SECTION A-A
0.3
SECTION B-B
3.35
2.0 4.0
3.35 8.0
BB
AR0.5
(TYP.)
A
5.5
12.0
1.75
1.5
1.5
454
YWWS
Pin 1
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF1192B (R) 1/24/18 Page 5 of 5 www.murata.com
Case Dimensions
Electrical Connections
Dimension mm Inches
Min Nom Max Min Nom Max
A2.87 3.00 3.13 0.113 0.118 0.123
B2.87 3.00 3.13 0.113 0.118 0.123
C1.12 1.25 1.38 0.044 0.049 0.054
D0.77 0.90 1.03 0.030 0.035 0.040
E2.67 2.80 2.93 0.105 0.110 0.115
F1.47 1.60 1.73 0.058 0.063 0.068
G0.72 0.85 0.98 0.028 0.033 0.038
H1.37 1.50 1.63 0.054 0.059 0.064
I0.47 0.60 0.73 0.019 0.024 0.029
J1.17 1.30 1.43 0.046 0.051 0.056
Connection Terminals
Port 1 Single Ended Input 2
Port 2 Single Ended Output 5
Ground All others
Single Ended Operation Only
Dot indicates Pin 1
6-Terminal Ceramic Surface-Mount Case
3.0 X 3.0 mm Nominal Footprint
SM3030-6 Case
TOP VIEW BOTTOM VIEW
1
2
3
6
5
4
1
2
3
6
5
4
A
BC
DJ
EF
GH
I
454
YWWS
