MICROPROCESSOR CRYSTALS MOLDED PLASTIC SURFACE MOUNT ABSM 13.2 x 4.7 x 4.3 mm FEATURES: * Wide frequency range. * Economical surface mount design. APPLICATIONS: * Communication equipment. * Measuring instruments. * Excellent heat resistance. * Suitable for solder reflow. * A / V equipment. S PP EE CC IFIIFCIA OIN ST TA AN ND DA AR RDDSS CT AIT OS NS Frequency Range 3.57MHz 70MHz FrequencyRange Range MHz MHz Frequency 3.5 MHz - 25 MHz Frequency Range 3.5 25T MHz S N D PP EE C IFI-MHz IF C IO(Fundamental) NS Operation Mode 3.57MHz ~I-A 25MHz ST TA AMode N DA AR RD DSS C C A Operation Fundamental, ATT I O N S Operation Mode Operating Temperature Operating Temperature Storage Temperature Storage Temperature Operating Temperature Frequency Tolerance @@25C Frequency Tolerance 25C Storage Temperature Frequency Stability over Temp. Frequency over Temp. @ 25C FrequencyStability Tolerance Equivalent Series Resistance Equivalent Series Resistance Frequency Stability over Temp. (ESR) Maximum (ESR) Maximum Equivalent Series Resistance (ESR) Fundamental Shunt Capacitance C0 Shunt Capacitance C0 Load Capacitance CL Load Capacitance CL Drive Level Drive Level Aging @@25 C First Year Aging 25 C First Year Overtone Insulation3rd Resistance Insulation Resistance Shunt Capacitance C0 Load Capacitance CL Drive Level Aging @ 25C per Year Insulation Resistance Fundamental, AT (Fund. BT or AT) 25.01MHz ~ 45MHz -10C to + 60 C (See Options) -10C to + 60 C (See Options) 30.0MHz ~ 70MHz (3rd overtone) -55C to + 125 C -55C to + 125 C -10C to +60C (See Options) 50 ppm max. (See Options) 50 ppm max. Options) - 40 to (See +85C 50 ppm max. (See Options) 50ppm 50 ppm max. max. (See (See Options) Options) 200 W for 3.5 MHz < F < 4.0 MHz 200 W for 3.5 MHz <F < 4.0 MHz 100ppm max. (See 150 W for 4.0 MHz < FOptions) < 6.0 MHz 150 W for 4.0 MHz < F < <6.0 MHz 200100 W max. for6.0 3.57MHz 4.0MHz W for MHz < F< <F 10.0 MHz 100 W for 6.0 MHz < F < 10.0 MHz 15080 W max. < 5.0MHz W forfor10 4.0MHz MHz < F << F14.0 MHz 80 W for 10 MHz < F_< 14.0 MHz 12050 W max. < 6.0MHz W forfor14 5.0MHz MHz < F <<_F25 MHz 50 W for 14 MHz < F < 25 MHz 1007WpF max. for 6.0MHz < F < 7.0MHz max. 7 pF max. 80 16 Wp max. forOption) 7.0MHz < F < 9.0MHz F (See 16 p F (See Option) 60 100 W max. for 9.0MHz < F < 13.0MHz W max. 100 W max. 40 W5max. 13.0MHz < F < 45.0MHz pp mfor max. 5 pp m max. 100500 W max. < F<15V 70MHz M W for min.30.0MHz at 100 Vdc 500 M W min. at 100 Vdc 15V 7pF max. 18pF (See Options) 100W max. 5ppm max. 500MW min. at 100Vdc 15V Dimensions: Inches (mm) Environmental, and mechanical specifications, see appendix C. Group 2. Marking, see appendix G. Recommended handling, see appendix F. Tape and Reel, see appendix H.(1,000 pcs / reel) Reflow profile, see appendix E. Application notes, see appendix A. PIN CONNECTIONS ORDERING OPTIONS ABSM - Frequency - CL - ESR - Temperature - Tolerance - Stability - Mode - Packaging XX.XXXX MHz Load cap. in pF or -S for Series ABRACON IS ISO 9001 / QS 9000 CERTIFIED RXXX (value in W) -E for 0C to + 70C -B for -20C to + 70C -C for -30C to + 70C -N for -30C to + 85C -D for -40C to + 85C -Z for 50ppm -3 for 25ppm -4 for 30ppm -T (Tape & Reel) _ 30MHz) - F (Fundamental AT > _ 30MHz) - FB (Fundamental BT > NOTE: Left blank if standard * All specifications and markings subject to change without notice ABRACON 29 Journey * Aliso Viejo, CA 92656 * USA (949) 448-7070 * F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com * INTERNET ADDRESS: www.abracon.com C O R P O R AT I O N (R) 21