Taping is the standard packaging method. c Minimum Quantity Guide GRM18 GRJ21/GRM21/GR321/ GR721 GRJ31/GRM31/GR331/ GR731 GRJ32/GRM32/GR332 GRJ43/GRM43/GR343/ GR443 GRJ55/GRM55/GR355/ GR455 GA242 AC250V W T Paper Tape Embossed Tape 1.6 0.8 0.8 4,000 - 1.0 4,000 - 1.25 - 3,000 1.0 4,000 - 1.25 - 3,000 1.6 - 2,000 1.0 4,000 - 1.25 - 3,000 1.5 - 2,000 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 1.5 - 1,000 2.0 - 1,000 2.7 - 500 1.5 - 2,000 1.5 - 1,000 2.0 - 1,000 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 2.0 - 2,000 1.5 - 1,000 2.0 - 1,000 1.5 - 1,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 2.7 - 500 2.9 - 500 2.0 3.2 3.2 1.25 1.6 2.5 Safety Std. Certification 4.5 4.5 5.7 4.5 2.0 3.2 5.0 2.0 GA243 4.5 3.2 GA255 5.7 5.0 GA342 4.5 2.0 GA343 4.5 3.2 GA352 5.7 2.8 GA355 o180mm Reel L Medium Voltage GRM42/GR442 Quantity (pcs.) Dimensions (mm) Part Number 5.7 5.0 Continued on the following page. Continued from the preceding page. c Tape Carrier Packaging (1) Appearance of Taping q Embossed Tape w Paper Tape Cover Tape: 0.06mm in thickness Top Tape: 0.05mm in thickness Sprocket Hole: As specified in (2) Sprocket Hole: As specified in (2) Cavity for Chip: As specified in (2) Cavity for Chip: As specified in (2) Bottom Tape: 0.05mm in thickness Base Tape: As specified in (2) Packed Chips Chip Base Tape: As specified in (2) Packed Chips Chip (2) Dimensions of Tape q Embossed Tape 8mm width, 4mm pitch Tape 12mm width, 8mm/4mm pitch Tape W0.1 4.0T0.05 0.25T0.1 5.5T0.05 B Direction of Feed B* GRJ21/GRM21/GR321/GR721 (TU1.25mm) 1.45 2.25 GRJ31/GRM31/GR331/GR731 (TU1.25mm) 2.0 3.6 2.9 3.6 (TU1.25mm) 0.3T0.1 1.75T0.1 A 2.5 max. A* o1.5Y0 4.0T0.1 8.0T0.3 B Direction of Feed GRJ32/GRM32/GR332 2.0T0.05 1.75T0.1 A Part Number 8.0T0.1*1 12.0T0.3 2.0T0.05 3.5T0.05 4.0T0.1 W0.1 o1.5Y0 3.7 max. Part Number A* B* GRM42/GR442/GA242/GA342 2.5 5.1 GRJ43/GRM43/GR343/GR443/GA243/GA343 3.6 4.9 GA352 3.2 6.1 GRJ55/GRM55/GR355/GR455/GA255/GA355 5.4 6.1 *1 4.00.1mm in case of GRM42/GR442/GA242/GA342 *Nominal Value *Nominal Value (in mm) w Paper Tape 8mm width, 4mm pitch Tape 4.0T0.1 Direction of Feed 8.0T0.3 A A* B* GRM18 Part Number 1.05 1.85 GRJ21/GRM21/GR321/GR721 (T=1.0mm) 1.45 2.25 GRM31/GR731 (T=1.0mm) 2.0 3.6 GRM32 (T=1.0mm) 2.9 3.6 1.1 max. 1.75T0.1 3.5T0.05 2.0T0.05 B 4.0T0.1 W0.1 o1.5Y0 *Nominal Value (in mm) Continued on the following page. Continued from the preceding page. (3) Dimensions of Reel 13.0T1.0 (Tape width 8mm) 17.0T1.0 (Tape width 12mm) 2.0T0.5 180 +0 -1.5 +1 60 -0 o13T0.2 o21T0.8 +1.0 9.0 -0 (Tape width 8mm) 13.0 +1.0 -0 (Tape width 12mm) (in mm) (4) Taping Method q Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user. w Part of the leader and part of the empty tape should be attached to the end of the tape as shown at right. e The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r Missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t The top tape or cover tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y Cumulative tolerance of sprocket holes, 10 pitches: T0.3mm. u Peeling off force: 0.1 to 0.6N in the direction shown at right. Vacant section Chip mounting unit Vacant section 160 min. 190 min. 210 min. (Top Tape or Cover Tape alone) Direction of feed (in mm) 165 to 180 Top Tape or Cover Tape Base Tape