DO NOT
SCALE FROM
THIS PRINT
FFMD-XX-X-XX.XX-01-X-X-XXX
No OF POSITIONS
-03, -04, -05, -06, -07, -08, -09,
-10, -13, -14, -15, -16, -17,
-18, -19, -20, -22, -25
LEAD STYLE
END ASSEMBLY
-D: DOUBLE END
-S: SINGLE END
*-T: TRANSFER END
ASSEMBLY LENGTH
(2.00[50.8] MINIMUM)
OPTION
TRANSFER OPTION
-N: SOCKET HAS NOTCH POLARIZATION
(-T END ASSEMBLY ONLY)
(LEAVE BLANK FOR -S AND -D
END OPTIONS)
(NOT AVAILABLE ON POSITIONS -02
THRU -04)
FIG. 2
(FFMD-10-S-XX.XX-01-X SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
PLATING OPTIONS
-RW: REVERSE WIRING
-BXX: BREAKOUT OPTION
-O: OUTSIDE REVERSED
-M: MIDDLE REVERSED
-R: REVERSE
-DXX: DAISY CHAIN (MINIMUM 2.00[50.8],
1.00[25.4] INCREMENTS)
-SR: STRAIN RELIEF
(NOT AVAILABLE WITH -O, -M,
-R, -DXX OR -BXX)
(SOLD AS ASSEMBLIES ONLY)
LEAVE BLANK FOR STANDARD
(USE T-1S57-01-T AND C-67-L)
-L: SELECTIVE LIGHT GOLD
(USE T-1S57-01-L AND C-67-L)
-F: FLASH SELECTIVE GOLD
(USE T-1S57-01-F AND C-67-F)
-S: SELECTIVE GOLD
(USE T-1S57-01-S AND C-67-S)
.120 3.05
REF
(SEE NOTE 7)
XX.XX [XX.X x 25.4]
.13[3.2]
(No. OF POS x .050)[1.27])+.165[4.19] REF
C
C
C
.200
±.010
5.08
±0.25
.121
REF
3.07
.010
MAX
0.25
CABLE OVERHANG
(SEE NOTE 7)
2
T-1S57-01-X
3
FMB-XX-D-XX
FMC-XX-D
S
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
NOTCH DENOTES FIRST POSITION
(SEE NOTE 7)
XX.XX [XX.XX x 25.4]
.13[3.2]
C
FIG. 1
(FFMD-10-D-XX.XX-01-X SHOWN)
C
C
*16-25 POS TRANSFER END STRAIN RELIEF NOT RELEASED FOR PRODUCTION
S
S
S
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
BY:
FFMD-XX-X-XX.XX-01-X-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
T NEWTON
02/15/2008
5
1
SHEET SCALE: 2:1
INSULATOR: PBT, COLOR: BLACK
CONTACT: BeCu
TERMINAL: PHOS BRONZE
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. FFSD ASSEMBLY TO BE USED FOR TRANSFER END ONLY.
3. ALL ASSEMBLIES TO BE 100% ELECTRONICALLY TESTED
FOR SHORTS AND OPENS.
4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V.
5. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL.
6. FFMD CABLE ASSEMBLIES ARE LEAD FREE.
7.WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY
NOT EXTEND PAST THE CABLE INSULATION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION S
(No. OF POS. x .050[1.27]) + .315[8.00]
REF
COLORED WIRE TO OPPOSITE
SIDE OF FIRST POS INDICATOR
NOTCH DENOTES FIRST POSITION
XX.XX[XX.X x 25.4]
.13[3.2]
(XX.XX[XX.X x 25.4] + .4375[11.113])
.125[3.18]
IN-PROCESS 1
-SR ONLY
IN-PROCESS 2
-SR ONLY
.075 1.91
REF
.040 1.02
REF
FIG. 5
(FFMD-10-X-XX.XX-01-X-N SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(FOR -T ONLY)
(IF OPTION IS SPECIFIED USE FFSD-XX-01-X-N)
FIG. 7
(FFMD-10-T-XX.XX-01-X-N-B05 SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
"XX" = NO. OF CONDUCTORS PER ROW
BROKEN OUT FROM THE FIRST POSITION
01
02
03
2.00[50.8] MIN
5.00[127.0] MAX
"XX"
.335
±.01
8.51
±0.254
.039 1.00
XX.XX[XX.X x 25.4]
.13[3.2]
5
4
FIG. 3
(FFMD-10-D-XX.XX-01-X-SR SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
FIG. 4
(FFMD-10-X-XX.XX-01-X-RW SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
FIG. 6
(FFMD-10-T-XX.XX-01-X-N SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
C
C
C
SHEET OF
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
BY:
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
T NEWTON
02/15/2008
5
2
SHEET SCALE: 2:1
REVISION S
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
FFMD-XX-X-XX.XX-01-X-X-XXX
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.X x 25.4]
.13[3.2]
OUTSIDE CONNECTOR REVERSED
WHEN DAISY CHAINED
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.X x 25.4]
.13[3.2]
OUTSIDE CONNECTOR REVERSED
WHEN DAISY CHAINED
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.X x 25.4]
.13[3.2]
MIDDLE CONNECTOR REVERSED
WHEN DAISY CHAINED
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.X x 25.4]
.13[3.2]
MIDDLE CONNECTOR REVERSED
WHEN DAISY CHAINED
FIG. 9
(FFMD-10-D-XX.XX-01-X-DXX-M SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 8
(FFMD-10-D-XX.XX-01-X-DXX-O SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 11
(FFMD-10-T-XX.XX-01-X-N-DXX-M SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 10
(FFMD-10-T-XX.XX-01-X-N-DXX-O SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
SHEET OF
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
BY:
FFMD-XX-X-XX.XX-01-X-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
T NEWTON
02/15/2008
5
3
SHEET SCALE: 2:1
REVISION S
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.X x 25.4]
.13[3.2]
BOTH CONNECTORS REVERSED
WHEN DAISY CHAINED
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.XX x 25.4]
.13[3.2]
BOTH CONNECTORS REVERSED
WHEN DAISY CHAINED
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.X x 25.4]
.13[3.2]
FIRST POSITION INDICATOR
(MIN 2")
XX.XX[XX.X x 25.4]
.13[3.2]
FIG. 12
(FFMD-10-D-XX.XX-01-DXX-R SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 13
(FFMD-10-D-XX.XX-01-X-DXX)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 14
(FFMD-10-T-XX.XX-01-X-N-DXX-R SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 15
(FFMD-10-T-XX.XX-01-X-N-DXX)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
SHEET OF
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
BY:
FFMD-XX-X-XX.XX-01-X-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
T NEWTON
02/15/2008
5
4
SHEET SCALE: 2:1
REVISION S
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
5
7
8
6
FIG. 16
(FFMD-10-T-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(FOR POSITIONS 2-15 ONLY)
FIG. 17
(FFMD-25-T-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(FOR POSITIONS 16-25 ONLY)
*NOT RELEASED FOR PRODUCTION
SHEET OF
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
BY:
FFMD-XX-X-XX.XX-01-X-X-XXX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
T NEWTON
02/15/2008
5
5
SHEET SCALE: 2:1
REVISION S
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
