20V Complementary PowerTrench MOSFET tm General Description Features This device is designed specifically as a single package x Q1: N-Channel 3.7 A, 20V. RDS(ON) = 68 m: @ VGS = 4.5V solution for a DC/DC 'Switching' MOSFET in cellular handset and other ultra-portable applications. RDS(ON) = 86 m: @ VGS = 2.5V It x Q2: P-Channel -3.1 A, -20V. RDS(ON) = 95 m: @ VGS = -4.5V features an independent N-Channel & P-Channel MOSFET with low on-state resistance for minimum RDS(ON) = 141 m: @ VGS = -2.5V conduction losses. The gate charge of each MOSFET is also minimized to allow high frequency switching x Low profile - 0.8 mm maximum - in the new package directly from the controlling device. The MicroFET 2x2 MicroFET 2x2 mm package offers exceptional thermal performance for its HBM ESD protection level >2kV (Note 3) physical size and is well suited to switching applications. x RoHS Compliant Free from halogenated compounds and antimony oxides PIN 1 S1 G1 D1 D2 S1 1 6 D1 G1 2 5 G2 D2 3 4 S2 D2 D1 G2 S2 MicroFET 2x2 Absolute Maximum Ratings Symbol o TA=25 C unless otherwise noted Q1 Q2 Units VDS Drain-Source Voltage 20 -20 V VGS Gate-Source Voltage r12 12 3.7 -3.1 V A Parameter Drain Current ID - Continuous (Note 1a) - Pulsed PD 6 Power Dissipation for Single Operation TJ, TSTG FDMA1032CZ 20V Complementary PowerTrench MOSFET May 2010 FDMA1032CZ -6 (Note 1a) 1.4 (Note 1b) 0.7 Operating and Storage Junction Temperature Range -55 to +150 W qC Thermal Characteristics RTJA Thermal Resistance, Junction-to-Ambient (Note 1a) 86 (Single Operation) RTJA Thermal Resistance, Junction-to-Ambient (Note 1b) 173 (Single Operation) RTJA Thermal Resistance, Junction-to-Ambient (Note 1c) 69 (Dual Operation) RTJA Thermal Resistance, Junction-to-Ambient (Note 1d) 151 (Dual Operation) qC/W Package Marking and Ordering Information Device Marking Device Reel Size Tape width Quantity 032 FDMA1032CZ 7'' 8mm 3000 units 2010 Fairchild Semiconductor Corporation FDMA1032CZ Rev B4 (W) Symbol TA = 25C unless otherwise noted Parameter Test Conditions Type Min Typ Max Units Off Characteristics BVDSS 'BVDSS 'TJ IDSS IGSS On Characteristics Q1 Q2 Q1 Q2 Q1 Q2 All 20 -20 VDS = VGS, ID = 250 PA VDS = VGS, ID = -250 A ID = 250 PA, Referenced to 25qC ID = -250 A, Referenced to 25qC VGS = 4.5 V, ID = 3.7 A VGS = 2.5 V, ID = 3.3 A VGS = 4.5 V, ID = 3.7 A, TJ = 125qC VGS = -4.5V, ID = -3.1 A VGS = -2.5 V, ID = -2.5 A VGS = -4.5 V, ID = -3.1 A,TJ = 125qC VDS = 10 V, ID = 3.7 A VDS = -10 V, ID = -3.1 A Q1 Q2 Q1 Q2 Q1 0.6 -0.6 Q1 VDS = 10 V, VGS = 0 V, f = 1.0 MHz V 15 -12 mV/qC 1 -1 10 PA 1.0 -1.0 -4 4 37 50 53 1.5 -1.5 V 68 86 90 m: 95 141 140 m: Q1 Q2 60 88 87 16 -11 Q1 Q2 Q1 Q2 Q1 Q2 340 540 80 120 60 100 PA (Note 2) VGS(th) Gate Threshold Voltage 'VGS(th) 'TJ RDS(on) Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance gFS VGS = 0 V, ID = 250 PA ID = -250 PA VGS = 0 V, ID = 250 PA, Referenced to 25qC ID = -250 A, Referenced to 25qC VDS = 16 V, VGS = 0 V VGS = 0 V VDS = -16 V, VGS = 12 V, VDS = 0 V Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage Forward Transconductance Q2 mV/qC S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge Q2 VDS = -10 V, VGS = 0 V, f = 1.0 MHz pF pF pF (Note 2) Q1 VDD = 10 V, ID = 1 A, VGS = 4.5 V, RGEN = 6 : Q2 VDD = -10 V, ID = -1 A, VGS = -4.5 V, RGEN = 6 : Q1 VDS = 10 V, ID = 3.7 A, VGS = 4.5 V Q2 VDS = -10 V,ID =- 3.1 A, VGS =- 4.5 V Q1 Q2 Q1 Q2 Q1 Q2 Q1 Q2 Q1 Q2 Q1 Q2 Q1 Q2 8 13 8 11 14 37 3 36 4 7 0.7 1.1 1.1 2.4 16 24 16 20 26 59 6 58 6 10 ns ns ns ns nC nC nC FDMA1032CZ Rev B4 (W) FDMA1032CZ 20V Complementary PowerTrench MOSFET Electrical Characteristics Symbol Parameter TA = 25C unless otherwise noted Test Conditions Type Min Typ Max Units Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Source-Drain Diode Forward Current VSD Source-Drain Diode Forward Voltage Diode Reverse Recovery Time Diode Reverse Recovery Charge trr Qrr VGS = 0 V, IS = 1.1 A (Note 2) VGS = 0 V, IS = -1.1 A (Note 2) Q1 IF = 3.7 A, dIF/dt = 100 A/s Q2 IF = -3.1 A, dIF/dt = 100 A/s Q1 Q2 Q1 Q2 Q1 Q2 Q1 Q2 0.7 -0.8 11 25 2 9 1.1 -1.1 1.2 -1.2 A V ns nC Notes: 1. RTJA is determined with the device mounted on a 1 in2 oz. copper pad on a 1.5 x 1.5 in. board of FR-4 material. RTJC is guaranteed by design while RTJA is determined by the user's board design. (a) RTJA = 86 C/W when mounted on a 1 in2 pad of 2 oz copper, 1.5 " x 1.5 " x 0.062 " thick PCB. For single operation. (b) RTJA = 173 C/W when mounted on a minimum pad of 2 oz copper. For single operation. (c) RTJA = 69 oC/W when mounted on a 1 in2 pad of 2 oz copper, 1.5 " x 1.5 " x 0.062 " thick PCB. For dual operation. (d) RTJA = 151 oC/W when mounted on a minimum pad of 2 oz copper. For dual operation. a)86 oC/W when mounted on a 1 in2 pad of 2 oz copper. b)173 oC/W when mounted on a minimum pad of 2 oz copper. c)69 oC/W when mounted on a 1 in2 pad of 2 oz copper. d)151 oC/W when mounted on a minimum pad of 2 oz copper. 2. Pulse Test : Pulse Width < 300 us, Duty Cycle < 2.0% 3. The diode connected between the gate and source serves only as protection against ESD. No gate overvoltage rating is implied. FDMA1032CZ Rev B4 (W) FDMA1032CZ 20V Complementary PowerTrench MOSFET Electrical Characteristics 6 2 2.0V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2.5V VGS = 4.5V ID, DRAIN CURRENT (A) 5 3.5V 3.0V 4 3 2 1 1.5V 0 0.2 0.4 0.6 0.8 VDS, DRAIN-SOURCE VOLTAGE (V) 1 1.4 2.5V 1.2 3.0V 3.5V 4.0V 1 1.2 0 Figure 1. On-Region Characteristics. 4.5V 1 2 3 4 ID, DRAIN CURRENT (A) 5 6 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.13 1.6 ID = 3.7A VGS = 4.5V 1.5 ID = 1.85A RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 1.6 0.8 0 1.4 1.3 1.2 1.1 1 0.9 0.8 0.11 0.09 o 0.07 TA = 125 C 0.05 o TA = 25 C 0.7 0.6 0.03 -50 -25 0 25 50 75 100 o TJ, JUNCTION TEMPERATURE ( C) 125 150 0 Figure 3. On-Resistance Variation with Temperature. 100 IS, REVERSE DRAIN CURRENT (A) VDS = 5V 5 4 3 2 o TA = 125 C 2 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 6 ID, DRAIN CURRENT (A) VGS = 2.0V 1.8 -55oC 1 o VGS = 0V 10 1 0.1 TA = 125oC 0.01 o 25 C o 0.001 -55 C 25 C 0.0001 0 0.5 1 1.5 2 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 2.5 0 0.2 0.4 0.6 0.8 1 VSD, BODY DIODE FORWARD VOLTAGE (V) 1.2 Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDMA1032CZ Rev B4 (W) FDMA1032CZ 20V Complementary PowerTrench MOSFET Typical Characteristics Q1 (N-Channel) 10 500 VDS = 5V VGS, GATE-SOURCE VOLTAGE (V) ID = 3.7A f = 1MHz VGS = 0 V 15V 8 400 CAPACITANCE (pF) 10V 6 4 300 200 Coss 2 100 0 0 Crss 0 2 4 6 Qg, GATE CHARGE (nC) 8 10 0 Figure 7. Gate Charge Characteristics. RDS(ON) LIMIT 100us 1ms 10ms 100ms 1s 10s DC 1 VGS = 4.5V SINGLE PULSE RTJA = 173C/W TA = 25C 0.1 0.1 1 10 VDS, DRAIN-SOURCE VOLTAGE (V) SINGLE PULSE RTJA = 173C/W TA = 25C 40 30 20 10 0.01 100 Figure 9. Maximum Safe Operating Area. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 20 50 P(pk), PEAK TRANSIENT POWER (W) 10 5 10 15 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 8. Capacitance Characteristics. 100 ID, DRAIN CURRENT (A) Ciss 0 0.0001 0.001 0.01 0.1 1 t1, TIME (sec) 10 100 1000 Figure 10. Single Pulse Maximum Power Dissipation. 1 D = 0.5 RTJA(t) = r(t) * RTJA RTJA =173 C/W 0.2 0.1 P(pk) 0.1 0.05 t1 0.02 0.01 t2 TJ - TA = P * RTJA(t) Duty Cycle, D = t1 / t2 SINGLE PULSE 0.01 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1b. Transient thermal response will change depending on the circuit board design. FDMA1032CZ Rev B4 (W) FDMA1032CZ 20V Complementary PowerTrench MOSFET Typical Characteristics Q1 (N-Channel) 6 2.6 VGS = 4 5V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2.5V -ID, DRAIN CURRENT (A) 5 3.5V 2.0V 3.0V 4 3 2 1 1.5V 0 1.8 -2.5V 1.4 -3.0V -3.5V 1 0.4 0.8 1.2 1.6 -VDS, DRAIN-SOURCE VOLTAGE (V) 2 0 Figure 12. On-Region Characteristics. -4.5V 1 2 3 4 -ID, DRAIN CURRENT (A) 5 6 Figure 13. On-Resistance Variation with Drain Current and Gate Voltage. 0.2 1.5 1.4 RDS(ON), ON-RESISTANCE (OHM) ID = -3.1A VGS = -4.5V 1.3 1.2 1.1 1 0.9 0.8 0.7 ID = -1.55A 0.16 0.12 o TA = 125 C 0.08 o TA = 25 C 0.04 -50 -25 0 25 50 75 100 o TJ, JUNCTION TEMPERATURE ( C) 125 150 0 Figure 14. On-Resistance Variation with Temperature. 100 10 VGS = 0V -IS, REVERSE DRAIN CURRENT (A) VDS = -5V 5 4 3 2 TA = 125oC 2 4 6 8 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 15. On-Resistance Variation with Gate-to-Source Voltage. 6 -ID, DRAIN CURRENT (A) -4.0V 0.6 0 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE VGS = -2.0V 2.2 -55oC 1 25oC 0 10 1 TA = 125oC 0.1 o 25 C 0.01 o -55 C 0.001 0.0001 0 0.5 1 1.5 2 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 16. Transfer Characteristics. 2.5 0 0.2 0.4 0.6 0.8 1 1.2 1.4 -VSD, BODY DIODE FORWARD VOLTAGE (V) 1.6 Figure 17. Body Diode Forward Voltage Variation with Source Current and Temperature. FDMA1032CZ Rev B4 (W) FDMA1032CZ 20V Complementary PowerTrench MOSFET Typical Characteristics: Q2 (P-Channel) 1000 f = 1MHz VGS = 0 V ID = -3.1A 800 8 VDS = -5V CAPACITANCE (pF) -VGS, GATE-SOURCE VOLTAGE (V) 10 -15V 6 -10V 4 600 Ciss 400 Coss 2 200 0 0 Crss 0 2 4 6 8 10 Qg, GATE CHARGE (nC) 12 14 0 Figure 18. Gate Charge Characteristics. 20 Figure 19. Capacitance Characteristics. 50 10 RDS(ON) LIMIT P(pk), PEAK TRANSIENT POWER (W) 100 100us 1ms 10ms 100ms 1 10s 1s DC VGS = -4.5V SINGLE PULSE o RTJA = 173 C/W 0.1 TA = 25oC 0.01 0.1 1 10 -VDS, DRAIN-SOURCE VOLTAGE (V) 100 SINGLE PULSE RTJA = 173C/W TA = 25C 40 30 20 10 0 0.0001 Figure 20. Maximum Safe Operating Area. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE -ID, DRAIN CURRENT (A) 4 8 12 16 -VDS, DRAIN TO SOURCE VOLTAGE (V) 0.001 0.01 0.1 1 t1, TIME (sec) 10 100 1000 Figure 21. Single Pulse Maximum Power Dissipation. 1 D = 0.5 RTJA(t) = r(t) * RTJA RTJA =173 C/W 0.2 0.1 P(pk) 0.1 0.05 t1 0.02 0.01 t2 TJ - TA = P * RTJA(t) Duty Cycle, D = t1 / t2 SINGLE PULSE 0.01 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 22. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1c. Transient thermal response will change depending on the circuit board design. FDMA1032CZ Rev B4 (W) FDMA1032CZ 20V Complementary PowerTrench MOSFET Typical Characteristics: Q2 (P-Channel) FDMA1032CZ 20V Complementary PowerTrench MOSFET Dimensional Outline and Pad Layout FDMA1032CZ Rev B4 (W) tm tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handing and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. F Rev. I48 FDMA1032CZ Rev B4 (W) FDMA1032CZ 20V Complementary PowerTrench MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Power-SPMTM AccuPowerTM F-PFSTM (R)* PowerTrench(R) Auto-SPMTM FRFET(R) SM Global Power Resource PowerXSTM Build it NowTM The Power Franchise(R) (R) Green FPSTM Programmable Active DroopTM CorePLUSTM Green FPSTM e-SeriesTM QFET(R) CorePOWERTM QSTM GmaxTM CROSSVOLTTM TinyBoostTM Quiet SeriesTM GTOTM CTLTM TinyBuckTM RapidConfigureTM IntelliMAXTM Current Transfer LogicTM TinyCalcTM ISOPLANARTM DEUXPEED(R) TM TinyLogic(R) Dual CoolTM MegaBuckTM TINYOPTOTM (R) EcoSPARK MICROCOUPLERTM Saving our world, 1mW/W/kW at a timeTM TinyPowerTM EfficentMaxTM MicroFETTM SignalWiseTM TinyPWMTM ESBCTM MicroPakTM SmartMaxTM TinyWireTM MicroPak2TM SMART STARTTM (R) TriFault DetectTM MillerDriveTM SPM(R) TRUECURRENTTM* STEALTHTM MotionMaxTM Fairchild(R) SerDesTM SuperFETTM Motion-SPMTM Fairchild Semiconductor(R) SuperSOTTM-3 OptiHiTTM FACT Quiet SeriesTM SuperSOTTM-6 OPTOLOGIC(R) FACT(R) UHC(R) OPTOPLANAR(R) SuperSOTTM-8 FAST(R) (R) Ultra FRFETTM SupreMOSTM FastvCoreTM UniFETTM SyncFETTM FETBenchTM VCXTM Sync-LockTM FlashWriter(R) * PDP SPMTM VisualMaxTM FPSTM XSTM