P6KE Series
Page <1> 19/05/08 V1.1
Features:
•Plastic package.
•Exceeds environmental standards of MIL-STD-19500.
•600W surge capability at 10 x 1000µs waveform, duty
cycle: 0.01%.
•Excellent clamping capability.
•Low zener impedance.
•Fast response time: typically less than 1.0ps from
0 volts to VBR for unidirectional and 5.0ns for
bidirectional.
•Typical IRless than 1µA above 10V.
•High temperature soldering guaranteed: 260°C/10
seconds/0.375 Inch (9.5mm) lead length/5lbs. (2.3kg)
tension.
Mechanical Data
Case : Molded plastic
Lead : Pure tin plated lead free, solderable per MIL-STD-202, Method 208.
Polarity : Color band denotes cathode except bipolar.
Weight : 0.42 gram.
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
DO-15
Dimensions : Inches (Millimetres)
P6KE Series
Page <2> 19/05/08 V1.1
Type Number Symbol Value Units
Peak Power Dissipation at TA= 25°C, Tp= 1ms (Note 1) PPK Minimum 600 Watts
Steady State Power Dissipation at TL= 75°C
Lead Lengths 0.375 Inch 9.5mm (Note 2) PD5.0
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load (JEDEC method) (Note 3) IFSM 100 Amps
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4) VF3.5/5.0 Volts
Operating and Storage Temperature Range TJ, TSTG -55 to + 175 °C
Ratings and Characteristic Curves
Peak Pulse Power Rating Curve
PPPM, Peak Pulse Power, KW
tp, Pulse Width, sec.
Pulse Derating Curve
TAAmbient Temperature, °C
Peak Pulse Power (PPP)
or Current (IPPM)
Derating In Percentage, %
Notes: 1. Non-repetitive current pulse and derated above TA= 25°C.
2. Mounted on copper pad area of 1.6 x 1.6 inch (40 x 40mm) per.
3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
4. VF = 3.5V for devices of VBR ≤ 200V and VF = 5.0V maximum for devices of VBR>200V.
Devices for bipolar applications
1. For bidirectional use C or CA suffix for types P6KE6.8 through types P6KE400.
2. Electrical characteristics apply in both directions.
P6KE Series
Page <3> 19/05/08 V1.1
CJ, Junction Capacitance (pF)
Typical Junction Capacitance
(Unidirectional)
V (BR), Breakdown Voltage Volts
Maximum Non-Repetitive Forward Surge
Current Unidirectional Only
Number of Cycles at 60Hz
IFSM, Peak Forward Surge Current,
Amperes
t, Time, ms
Peak Pulse Current - %
Clamping Power Pulse Waveform
P6KE Series
Page <4> 19/05/08 V1.1
Electrical Characteristics (TA= 25°C unless otherwise noted)
Device Nominal
Voltage
(Volts)
Breakdown Voltage
Test
Current
at IT
(mA)
Stand-Off
Voltage
VWM
(Volts)
Maximum
Reverse
Leakage
at VWM
ID(µµA)
Maximum
Peak
Pulse
Current IRSM
(Note 2)
(Amps)
Maximum
Clamping
Voltage
at IPPM
VC (Volts)
Maximum
Temperature
Coefficient
of VBR(%/°C)
VBR (Volts) (Note 1)
Minimum Maximum
Unidirectional Bidirectional
P6KE100A P6KE100CA 100.0 95.0 105.0
1.0
85.5 5.0 4.5 137.0 0.106
P6KE10A P6KE10CA 10.0 9.50 10.5 8.55 10.0 43.0 14.5 0.073
P6KE110A P6KE110CA 110.0 105.0 116.0 94.0
5.0
4.1 152.0 0.107
P6KE120A P6KE120CA 120.0 114.0 126.0 102.0 3.8 165.0
P6KE12A P6KE12CA 12.0 11.4 12.6 10.2 37.0 16.7 0.078
P6KE13A P6KE13CA 13.0 12.4 13.7 11.1 34.0 18.2 0.081
P6KE150A P6KE150CA 150.0 143.0 158.0 128.0 3.0 207.0 0.108
P6KE15A P6KE15CA 15.0 14.3 15.8 12.8 29.0 21.2 0.084
P6KE160A P6KE160CA 160.0 152.0 168.0 136.0 2.8 219.0 0.108
P6KE16A P6KE16CA 16.0 15.2 16.8 13.6 28.0 22.5 0.086
P6KE180A P6KE180CA 180.0 171.0 189.0 154.0 2.5 246.0 0.108
P6KE18A P6KE18CA 18.0 17.1 18.9 15.3 25.0 25.2 0.088
P6KE200A P6KE200CA 200.0 190.0 210.0 171.0 2.2 274.0 0.108
P6KE20A P6KE20CA 20.0 19.0 21.0 17.1 22.0 27.7 0.090
P6KE22A P6KE22CA 22.0 20.9 23.1 18.8 20.0 30.6 0.092
P6KE24A P6KE24CA 24.0 22.8 25.2 20.5 19.0 33.2 0.094
P6KE27A P6KE27CA 27.0 25.7 28.4 23.1 16.8 37.5 0.096
P6KE300A P6KE300CA 300.0 285.0 315.0 256.0 1.5 414.0 0.110
P6KE30A P6KE30CA 30.0 28.5 31.5 25.6 15.0 41.4 0.097
P6KE33A P6KE33CA 33.0 31.4 34.7 28.2 13.8 45.7 0.098
P6KE36A P6KE36CA 36.0 34.2 37.8 30.8 12.6 49.9 0.099
P6KE39A P6KE39CA 39.0 37.1 41.0 33.3 11.6 53.9 0.100
P6KE400A P6KE400CA 400.0 380.0 420.0 342.0 1.1 548.0 0.110
P6KE440A P6KE440CA 440.0 418.0 462.0 376.0 1.04 600.0
P6KE47A P6KE47CA 47.0 44.7 49.4 40.2 9.7 64.8 0.101
P6KE62A P6KE62CA 62.0 58.9 65.1 53.0 7.4 85.0 0.104
P6KE68A P6KE68CA 68.0 64.6 71.4 58.1 6.8 92.0
P6KE7.5A P6KE7.5CA 7.5 7.13 7.88 10.0 6.40 500.0 55.0 11.3 0.061
P6KE Series
Page <5> 19/05/08 V1.1
Electrical Characteristics (TA= 25°C unless otherwise noted)
Device Nominal
Voltage
(Volts)
Breakdown Voltage
Test
Current
at IT
(mA)
Stand-Off
Voltage
VWM
(Volts)
Maximum
Reverse
Leakage
at VWM
ID(µµA)
Maximum
Peak
Pulse
Current IRSM
(Note 2)
(Amps)
Maximum
Clamping
Voltage
at IPPM
VC(Volts)
Maximum
Temperature
Coefficient
of VBR(%/°C)
VBR (Volts) (Note 1)
Minimum Maximum
Unidirectional Bidirectional
P6KE8.2A P6KE8.2CA 8.2 7.79 8.61
1.0
7.02 200.0 52.0 12.1 0.064
P6KE9.1A P6KE9.1CA 9.1 8.65 9.55 7.78 50.0 47.0 13.4 0.068
P6KE91A P6KE91CA 91.0 86.5 95.5 77.8 5.0 5.0 125.0 0.106
Notes:
1. VBR measured after ITapplied for 300µs, IT= square wave pulse or equivalent.
2. Surge current waverform per Figure 3 and derate.
3. For bipolar types having VWM of 10 volts and under, the IDlimit is doubled.
4. All terms and symbols are consistent with ANSI/IEEE C62.35.
For enquiries from all other markets
P6KE Series
Page <6> 19/05/08 V1.1
Notes:
International Sales Offices:
AUSTRALIA – Farnell
Tel No: ++61 1300 361 005
Fax No: ++61 1300 361 225
FRANCE – Farnell
Tel No: ++ 33 474 68 99 99
Fax No: ++ 33 474 68 99 90
NORWAY – Farnell
Tel No: 800 146 70
Fax No: 800 146 76
AUSTRIA – Farnell
Tel No: ++ 43 662 2180 680
Fax No: ++ 43 662 2180 670
GERMANY – Farnell
Tel No: ++ 49 89 61 39 39 39
Fax No: ++ 49 89 613 59 01
PORTUGAL – Farnell
Tel No: ++ 34 93 475 8804
Fax No: ++ 34 93 474 5288
RUSSIA – Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ESTONIA – Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
NETHERLANDS
– Farnell
Tel No: ++ 31 30 241 7373
Fax No: ++ 31 30 241 7333
UK – Farnell
Tel No: ++ 44 8701 200 200
Fax No: ++ 44 8701 200 201
SINGAPORE
–
Farnell-Newark
Tel No: ++ 65 6788 0200
Fax No: ++ 65 6788 0300
HONG KONG
–
Farnell-Newark
Tel No: ++ 852 2268 9888
Fax No: ++ 852 2268 9899
HUNGARY
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
BELGIUM – Farnell
Tel No: ++ 32 3 475 2810
Fax No: ++ 32 3 227 3648
BRAZIL – Farnell-Newark
Tel No: ++ 55 11 4066 9400
Fax No: ++ 55 11 4066 9410
IRELAND – Farnell
Tel No: ++ 353 1 830 9277
Fax No: ++ 353 1 830 9016
INDIA
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ISRAEL – Farnell
Tel No: ++ 180 937 0015
Fax No: ++ 180 937 0014
SPAIN – Farnell
Tel No: 901 20 20 80
Fax No: 901 20 20 90
CHINA – Farnell-Newark
Tel No: ++86 10 6238 5152
Fax No: ++86 10 6238 5022
CZECH REPUBLIC
- Farnell
Tel No: ++ 44 870 1200 208
Fax No: ++ 44 870 1200 209
ITALY – Farnell
Tel No: ++ 39 02 93 995 200
Fax No: ++ 39 02 93 995 300
SWEDEN – Farnell
Tel No: ++ 46 8 730 50 00
Fax No: ++ 46 8 83 52 62
MALAYSIA –
Farnell-Newark
Tel No: ++ 60 3 7873 8000
Fax No: ++ 60 3 7873 7000
SWITZERLAND
– Farnell
Tel No: ++ 44 204 64 64
Fax No: ++ 44 204 64 54
DENMARK – Farnell
Tel No: ++ 45 44 53 66 44
Fax No: ++ 45 44 53 66 06
UK –CPC
++ 44 8701 202 530
++ 44 8701 202 531
USA –
Newark
Tel No: 800 463 9275
NEW ZEALAND
– Farnell
Tel No: 0800 90 80 80
Fax No: 0800 90 80 81
EXPORT – Farnell
Tel No: ++ 44 8701 200 208
Fax No: ++ 44 8701 200 209
export
FINLAND – Farnell
Tel No: ++ 358 9 560 7780
Fax No: ++ 358 9 345 5411
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or ar e licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual pr operty rights is granted. The Information is subject to change without notice and r eplaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
