SPX2241 Features * * * * * * HARTTM digital communication Better than +/- 1.0% combined error 4 - 20 mA loop-powered output 0 - 250 to 0 - 1,000 psi Explosion Proof, Intrinsically Safe/ATEX approved Meets PED and CE requirements Benefits * * * * * * Configurable via handheld Precise repeatable pressure measurements Output supplied directly to DCS or PLC Customer defined pressure ranges Approved for hazardous environments Meets new EC requirements Description The SPX2241 is a smart 4 - 20 mA pressure transmitter designed for use in hazardous locations. The SPX2241 is an all welded construction that features a large diaphragm and a mounting flange for easy installation. The SPX2241E has explosion proof approval for Class 1, Division I, Groups A, B, C & D. The explosion proof model employs a conduit fitting. The SPX2241S is approved for ATEX/Intrinsically Safe II 1 G 100a Eex ia IIC, Zones 0 and 1. ATEX/intrinsically safe models can be supplied with either a conduit fitting or a 6 pin hermetically sealed bendix connector. Specifications TEMPERA TURE & ME CHANICAL CHARA CTERIS TIC S TEMPERATURE MECHANICAL CHARACTERIS CTERISTIC TICS o o Max Di aphr agm T emper at ur e: Diaphr aphragm emperat atur ure: 600 F (315 C) Zero Shift (due to temperature change): 1 psi/100oF Typical (from 75 to 450oF) 2 psi/100oF Typical (from 450 to 600oF) at ur e: El ectr onic s Oper atin g Temper ating emperat atur ure: Electr ectronic onics Operatin o o o o -20 to 185 F (-29 to 85 C) at ur eR an ge of Eff ects o ompen sat ed Temper ompens ated emperat atur ure Ran ang Effects ovver C Compen 0o to 150oF (-18o to 65oC) - Zero & Span (each): 0.01% FS/oF max (0.02% FS/oC max) Mou ntin g Bo lt Tor que: 125 inch/lbs. maximum Mountin nting Bolt orque: Standard Wetted Parts: DyMaxTM coated 15-5 PH SST 08/04 PERFORMANCE CHARACTERISTICS Output: 4 - 20 mA, with optional HARTTM Inp ut Volt ag e: 16 - 36 Vdc (Standard) Input ltag age: 16 - 30 Vdc (ATEX/Intrinsically Safe Applications) Combined Error: +/- 1.0% FSO (Including Linearity, Repeatability & Hysteresis) Repeatability: +/- 0.1%FSO Rer an gab abiility: 3:1 Turndown eran ang Over Pressure: 2 X FSO Zero Balance Adjustment Range: -40% to +10%; -80% to +20% for < 500 psi Gain Span Adjustment Range: +/- 2% FSO maximum Loa d R esistanc e: 500 @ 26 Vdc, 1000 @ 36 Vdc Re ance: www.dynisco.com Ordering Guide 2241 X X XX X XX XX XX X XX XX XXX Approval E = Explosion Proof S = ATEX/Intrinsically Safe N = No Approvals Option Temper at ur e Sen sor s emperat atur ure Sensor sors ZZ = No Thermocouple/RTD Diaphragm Material A = DyMax Coated 15-5 PH SST Electrical Connections AC = PT1H-10-6P Connector CA = 1/2-14 NPT Conduit with 42" Leads Mounting Flange 90 = Flat Faced Flange Pressure Units B = Bar C = KPa K = Kgf/cm 2 M = MPa P = PSI Communications A = No Protocol B = HARTTM Protocol Stem Length DD = 18", 46 cm Flex Snout Length NE = 2.031", 5.16 cm Pressure Range 13 = 250 psi 14 = 500 psi 15 = 750 psi 16 = 1,000 psi 17.5 35 50 70 Bar Bar Bar Bar 17.5 35 50 70 Kgf/cm2 Kgf/cm2 Kgf/cm2 Kgf/cm2 1.75 MPa 3.5 MPa 5 MPa 7 MPa Shaded sections refer to standard configurations. Accuracy may be affected if non-standard configurations are used. For additional options please consult factory. RIGID STEM LENGTH u .06 (1.5 mm) A B O 1.00 25.4mm O RIGID STEM OPTION 1.75 44.4mm GASKET 1.19 (30.2mm) OD .950 (24.1mm) ID .09 (2.3mm) THK O 1/2-14 NPT 18 AWG STRANDED CABLE WIRE 1.325 1.315 33.66mm 33.4mm O.62 (15.9mm) O.69 (17.5mm) A SST ARMORED CABLE .932 .927 23.66mm 23.55mm O 5/8 FLATS .536 .526 13.61mm 13.36mm .81 20.7mm 1.25 31.9mm LEAD LENGTH (42in.std (107cm) 1.48 37.7mm 4.00 101.6mm B .75 19mm Flex Length u.12 (3.1mm) 2.031 SNOUT (51.59 mm) 10.46 + FLEX LENGTH (or RIGID STEM LENGTH) u.25 (6.35 mm) (265.7mm) O.516 THRU (O3.11 mm) 4 HOLES EQ SP ON O 2.125 B.C. 7/8 in. (FLATS) VIEW A-A NO T WA R N I N R E MO VE SEA L G SC S RED Function E+ 45 .5 v BLACK E- GREEN GROUND ORANGE Rcal + BLUE Rcal RE O 2.125 54mm - VIEW B-B S D ZE x O Color 5 - Conductor 3 - Conductor Cable Wiring SPAN ZERO W O 3.25 82.6mm Alignment Flat 2x 5/16-24 UNF-2B THRU EQ SP 180 v APART (JACK-OUT SCREWS) Dynisco LLC 38 Forge Parkway Franklin, MA 02038 (USA) Phone +1 508 541 9400 Fax +1 508 541 6206 Email infoinst@dynisco.com 08/04 All dimensions are in inches (mm). Hotline 1-800-Dynisco www.dynisco.com