SN54AC02-SP www.ti.com.......................................................................................................................................... SCHS368A - OCTOBER 2008 - REVISED DECEMBER 2008 RAD-TOLERANT CLASS V, QUADRUPLE 2-INPUT POSITIVE-NOR GATES FEATURES 1 * * * (1) J OR W PACKAGE (TOP VIEW) AC Types Feature 1.5-V to 5.5-V Operation Rad-Tolerant: 50 KRad(Si) TID (1) - TID Dose Rate < 2 mRad/sec QML-V Qualified, SMD 5962-87612 1Y 1A 1B 2Y 2A 2B GND Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available contact factory for details. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 4Y 4B 4A 3Y 3B 3A DESCRIPTION The 'AC02 devices contain four independent 2-input NOR gates that perform the Boolean function Y = A * B or Y = A + B in positive logic. ORDERING INFORMATION (1) PACKAGE (2) TA -55C to 125C (1) (2) J - package tube W - package ORDERABLE PART NUMBER TOP-SIDE MARKING 5962-8761203VCA 5962-8761203VCA 5962-8761203VDA 5962-8761203VDA For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI Web site at www.ti.com. Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (EACH GATE) INPUTS B OUTPUT Y H X L X H L L L H A LOGIC DIAGRAM (POSITIVE LOGIC) 1A 1B 2A 2B 2 1 3 5 6 1Y 3A 3B 4 2Y 4A 4B 8 10 9 11 12 13 3Y 4Y 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2008, Texas Instruments Incorporated SN54AC02-SP SCHS368A - OCTOBER 2008 - REVISED DECEMBER 2008.......................................................................................................................................... www.ti.com ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX -0.5 6 UNIT VCC Supply voltage range IIK Input clamp current (2) VI < 0 or VI > VCC 20 mA IOK Output clamp current (2) VO < 0 50 mA IO Continuous output current VO = 0 to VCC 50 mA 100 mA 150 C Continuous current through VCC or GND Tstg (1) (2) Storage temperature range -65 V Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded provided the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS (1) TA = 25C MIN MAX VCC Supply voltage 1.5 VCC = 1.5 V VIH High-level input voltage VCC = 3 V VCC = 5.5 V Low-level input voltage MAX 1.5 5.5 2.1 3.85 0.3 VCC = 5.5 V V 1.2 2.1 VCC = 3 V UNIT MIN 3.85 VCC = 1.5 V VIL 5.5 1.2 -55C TO 125C V 0.3 0.9 0.9 1.65 1.65 V VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V IOH High-level output current VCC = 4.5 V to 5.5 V -24 -24 mA IOL Low-level output current VCC = 4.5 V to 5.5 V 24 24 mA VCC = 1.5 V to 3 V 50 50 VCC = 3.6 V to 5.5 V 20 20 t/v Input transition rise or fall rate (1) 2 ns/V All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): SN54AC02-SP SN54AC02-SP www.ti.com.......................................................................................................................................... SCHS368A - OCTOBER 2008 - REVISED DECEMBER 2008 ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VI = VIH or VIL II ICC VI = VIH or VIL MIN MAX 1.4 1.4 2.9 2.9 4.5 V 4.4 4.4 3V 2.58 2.4 IOH = -24 mA 4.5 V 3.94 IOH = -50 mA (1) 5.5 V IOH = -4mA UNIT MAX V 3.7 3.85 1.5 V 0.1 0.1 3V 0.1 0.1 4.5 V 0.1 0.1 IOL = 12 mA 3V 0.36 0.5 IOL = 24 mA 4.5 V 0.36 0.525 IOL = 50 mA (1) 5.5 V VI = VCC or GND 5.5 V VI = VCC or GND, IO = 0 5.5 V CI (1) MIN 3V IOL = 50 A VOL -55C TO 125C 1.5 V IOH = -50 A VOH TA = 25C VCC V 1.65 0.1 1 A 4 80 A 10 10 pF Test one output at a time, not exceeding 1-second duration. Measurement is made by forcing indicated current and measuring voltage to minimize power dissipation. Test verifies a minimum 50- transmission-line drive capability at 85C and 75- transmission-line drive capability at 125C. Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): SN54AC02-SP 3 SN54AC02-SP SCHS368A - OCTOBER 2008 - REVISED DECEMBER 2008.......................................................................................................................................... www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 1.5 V, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) A or B Y -55C TO 125C MIN UNIT MAX 144 ns 144 SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V 0.3 V, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) A or B Y -55C TO 125C MIN MAX 4 16.1 4 16.1 UNIT ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 5 V 0.5 V, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) A or B Y -55C TO 125C MIN MAX 2.9 11.5 2.9 11.5 UNIT ns OPERATING CHARACTERISTICS VCC = 5 V, TA = 25C PARAMETER Cpd 4 Power dissipation capacitance Submit Documentation Feedback TYP UNIT 55 pF Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): SN54AC02-SP SN54AC02-SP www.ti.com.......................................................................................................................................... SCHS368A - OCTOBER 2008 - REVISED DECEMBER 2008 PARAMETER MEASUREMENT INFORMATION 2 x VCC S1 R1 = 500 From Output Under Test Open GND CL = 50 pF (see Note A) R2 = 500 TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open 2 x VCC GND tw VCC When VCC = 1.5 V, R1 = R2 = 1 k Input 50% VCC 50% VCC 0V LOAD CIRCUIT VOLTAGE WAVEFORMS PULSE DURATION CLR Input VCC Reference Input VCC 50% VCC 50% VCC 0V 0V tsu trec Data 50% Input 10% VCC 50% VCC CLK th 90% 90% VCC 50% VCC 10% 0 V tr 0V VOLTAGE WAVEFORMS RECOVERY TIME tf VOLTAGE WAVEFORMS SETUP AND HOLD AND INPUT RISE AND FALL TIMES VCC Input 50% VCC 50% VCC 0V tPLH In-Phase Output 50% 10% 90% 90% tr 90% 50% VCC 50% VCC 0V tPHL tPHL Out-of-Phase Output VCC Output Control VOH 50% VCC 10% VOL tf tPLH 50% VCC 10% tf 50% 10% 90% VOH VOL tr VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES Output Waveform 1 S1 at 2 x VCC (see Note B) tPZL tPLZ VCC 50% VCC tPZH Output Waveform 2 S1 at GND (see Note B) 20% VCC VOL tPHZ 50% VCC VOH 80% VCC 0 V VOLTAGE WAVEFORMS OUTPUT ENABLE AND DISABLE TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr = 3 ns, tf = 3 ns. Phase relationships between waveforms are arbitrary. D. For clock inputs, fmax is measured with the input duty cycle at 50%. E. The outputs are measured one at a time with one input transition per measurement. F. tPLH and tPHL are the same as tpd. G. tPZL and tPZH are the same as ten. H. tPLZ and tPHZ are the same as tdis. Figure 1. Load Circuit and Voltage Waveforms Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): SN54AC02-SP 5 PACKAGE OPTION ADDENDUM www.ti.com 15-Oct-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type 5962-8761203VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type 5962-8761203VDA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP(R) Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2009, Texas Instruments Incorporated