PhotoMOS RELAYS GU (General Use) Type [2-Channel (Form A Form B) Type] FEATURES 9.78 .385 6.4 .252 3.90.2 .154.008 9.78 .385 6.4 .252 3.60.2 .142.008 mm inch 1. Approx. 1/2 the space compared with the mounting of a set of 1 Form A and 1 Form B photoMOS relays 2. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use 3. Low thermal electromotive force (Approx. 1 V) 4. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 5. Controls load currents up to 0.13 A with an input current of 5 mA with load voltage of 400 V 6. High speed switching: operate time of 300 s typical. 7. Eliminates the need for a power supply to drive the power MOSFET 8. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion (Typical 100 pA at 400 V) 9. Stable on resistance TYPICAL APPLICATIONS * High-speed inspection machines * Telephone equipment * Computer TYPES Output rating* Type AC/DC type Part No. Through hole terminal Load voltage Load current 400 V 100 mA Packing quantity Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQW614 AQW614A AQW614AX AQW614AZ Tube Tape and reel 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATINGS 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Symbol IF VR IFP Pin VL AQW614(A) 50 mA 3V 1A 75 mW 400 V IL 0.1 A Peak load current Power dissipation Total power dissipation Ipeak Pout PT 0.3 A 800 mW 850 mW I/O isolation voltage Viso 1,500 V AC Topr Tstg -40C to +85C -40F to +185F -40C to +100C -40F to +212F Input Output Temperature limits 492 Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage Continuous load current Operating Storage Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC IL = Max. 0.13 A (when used for 1 Form A or 1 Form B) 100 ms (1 shot), VL = DC Between input and output/between contact sets Non-condensing at low temperatures AQW614 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage On resistance Typical Maximum Minimum Typical Typical Maximum Typical AQW614 0.7 mA (N.O.) 0.9 mA (N.C.) 3 mA 0.4 mA 0.7 mA (N.O.) 0.8 mA (N.C.) 1.14 V (1.25 V at IF = 50 mA) 1.5 V 27 IFon (N.O.) IFoff (N.C.) IFoff (N.O.) IFon (N.C.) VF Ron 50 Maximum ILeak 1 A Typical Maximum Typical Maximum Typical Maximum Minimum Ton (N.O.) Toff (N.C.) 0.28 ms (N.O.) 0.43 ms (N.C.) 1 ms 0.04 ms (N.O.) 0.3 ms (N.C.) 1 ms 0.8 pF 1.5 pF 1,000 M Maximum Condition IL = 100 mA IL = 100 mA IF = 5 mA IF = 5 mA (N.O.) IF = 0 mA (N.C.) IL = 100 mA within 1 s on time IF = 0 mA (N.O.) IF = 5 mA (N.C.) VL = 400 V Output Off state leakage current Operate (OFF) time* Transfer characteristics Reverse (ON) time* I/O capacitance Initial I/O isolation resistance Toff (N.O.) Ton (N.C.) Ciso Riso IF = 0 mA 5 mA IL = 100 mA IF = 5 mA 0 mA IL = 100 mA f = 1 MHz VB = 0 500 V DC Note: Recommendable LED forward current IF = 5 mA. *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output Output 10% Ton 10% 90% Toff Toff Ton For Dimensions, see Page 440. For Schematic and Wiring Diagrams, see Page 445. For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 60 120 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) On resistance, Load current, mA 80 60 40 30 40 20 20 10 0 -40 -20 0 20 40 60 8085 100 Ambient temperature, C Operate (OFF) time, ms 50 100 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 1.0 0.8 0.6 0.4 0.2 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 Ambient temperature, C 493 AQW614 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) Load voltage: 400 V (DC); Continuous load current: 100 mA (DC) 1.2 0.8 0.6 0.4 0.2 5 4 3 2 -40 -20 0 20 40 60 0 8085 -40 -20 Ambient temperature, C 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Current, mA LED dropout voltage, V 1.5 1.4 1.3 Between terminal 7 and 8 100 (N.C.) 80 60 Between terminal 5 and 6 (N.O.) 40 20 -5 -4 -3 -2 -1 1 2 3 4 5 -20 Voltage, V -40 50mA 30mA 20mA 10mA 5mA 1.1 4 3 2 0 0 20 40 60 8085 Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics 1.2 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 5 1 1 -40 -20 0 20 40 60 8085 Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Off state leakage current, A 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) LED reverse (NO) current, mA 1.0 6 6 LED operate (OFF) current, mA Reverse (ON) time, ms Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 10 -3 10 -6 Between terminal 7 and 8 (N.C.) 10 -9 -60 -80 1.0 Between terminal 5 and 6 (N.O.) -100 0 -40 -20 10 0 20 40 60 8085 Ambient temperature, C -12 20 0 40 60 80 100 Load voltage, V 10. LED forward current vs. operate (OFF) time characteristics 11. LED forward current vs. reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 3.0 120 Reverse (ON) time, ms Operate (OFF) time, ms 2.5 2.0 1.5 1.0 0.5 0 494 9/1/2000 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 0.5 0.4 0.3 0.2 20 30 40 50 LED forward current, mA 60 0 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 100 80 60 40 20 0.1 10 Output capacitance, pF 0.6 Between terminal 5 and 6 (N.O.) Between terminal 7 and 8 (N.C.) 10 20 30 40 50 LED forward current, mA 60 0 10 20 30 40 50 Applied voltage, V 60 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog