Product - Specification 21st March 2004 ISSUE 1 TYPE HH SERIES High Voltage Resistors TYPE HH SERIES KEY FEATURES The HH type resistors offers a very stable high voltage resistor in a compact package with excellent pulse withstand capability. These are used mainly in physical and chemical measuring instruments, X-ray apparatus, electron microscopes and other high voltage industrial applications. * * * * * * * * Low TCR's Low Resistance Tolerances Small compact size Up to 6 Watts Dissipation High Reliability Excellent long-term stability High resistance to pulse voltages High thermal shock resistance when mounted to PCB STOCKISTS: This product is not stocked in Distribution. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Website - passives.tycoelectronics.com Email - passivesales@tycoelectronics.com Page 1 of 3 Product - Specification 21st March 2004 ISSUE 1 TYPE HH SERIES ELECTRICAL TYPE Power Rating @ 25C (Watts) Maximum Working Voltage DC (kV) Impulse Voltage (kV) 1.2 x 50 Microseconds 0.5W 1.5 3 Resistance Range (Ohms) Resistance Tolerance (%) Temperature Coefficient (ppm) 100K - 50M HH55 100K - 100M 25 1.0, 2.0, 5.0, 10 50 100K - 1G 100 100K - 100M HH60 1.0W 2 4 100K - 500M 25 1.0, 2.0, 5.0, 10 50 100K - 2G 100 100K - 100M HH65 HH70 2.0W 3.0W 5 10 10 20 100K - 500M 25 1.0, 2.0, 5.0, 10 50 100K - 2G 100 1M - 100M 25 100K - 500M 1.0, 2.0, 5.0, 10 50 100K - 2G HH80 HH120 4.0W 6.0W 15 20 30 40 100K - 500M 100K - 2G 500K - 500M 500K - 2G 100 50 1.0, 2.0, 5.0, 10 100 50 1.0, 2.0, 5.0, 10 100 ENVIRONMENTAL Test Item Operating Temperature Range Short Term Overload Resistance to Soldering Heat Long Term Stability Moisture Load Life Load Life Temperature Coefficient Characteristics -55C to +150C 0.5% 0.2% 0.5% 0.5% 0.5% "D" 25ppm "C" 50ppm "Z" 100ppm Test Method Rated Voltage x 2.5 applied for 5 seconds 350C for 3 seconds At normal temperature and humidity for 10,000 hours without load 40C 90 ~ 95%RH for 1,000 hours 25C Rated power x 1/2 for 3,000 hours The test data is based on a temperature difference of 100C (reference temperature 25C; measurement temperature, 125C) POWER DERATING CURVE Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Website - passives.tycoelectronics.com Email - passivesales@tycoelectronics.com Page 2 of 3 Product - Specification 21st March 2004 ISSUE 1 TYPE HH SERIES DIMENSIONS TYPE Body Diameter (D 1.0) 4.5 4.5 5.5 5.5 8.5 8.5 HH55 HH60 HH65 HH70 HH80 HH120 All Dimensions are nominal and in 'mm' unless otherwise stated. Do not Scale. Body Length (L1.0) 13.0 14.5 26.5 42.0 52.0 77.0 Lead Diameter (d0.05) 0.8 0.8 1.0 1.0 1.0 1.0 HOW TO ORDER HJ55 100K F B COMMON PART RESISTANCE VALUE TOLERANCE T.C.R. HH55 HH60 HH65 HH70 HH80 100K Ohm (100,000 Ohms) 100K 1 Meg Ohm (1,000,000 Ohms) 1M0 F -1% G - 2% J - 5% K - 10% D - 25ppm C - 50ppm Z - 100ppm This publication is issued to provide outline information only and (unless specifically agreed to the contrary by the Company in writing) is not to form part of any order or be regarded as a representation relating to the products or service concerned. We reserve the right to alter without notice the specification, design, price or conditions of supply of any product or service. Whilst Tyco Electronics Components products are of the very highest quality and reliability, all electronic components can occasionally be subject to failure. Where failure of a Tyco Electronics Components product could result in life threatening consequences, then the circuit and application must be discussed with the Company. Such areas might include ECG, respiratory and other medical and nuclear applications and any non fail-safe applications circuit. Telephone Tyco Passive Product Support Team ++ 44 (0) 1793 572484 Website - passives.tycoelectronics.com Email - passivesales@tycoelectronics.com Page 3 of 3