74AUP1G08
Low-power 2-input AND gate
Rev. 7 — 30 November 2017 Product data sheet
1 General description
The 74AUP1G08 provides the single 2-input AND function.
Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire VCC range from 0.8 V to 3.6 V.
This device ensures a very low static and dynamic power consumption across the entire
VCC range from 0.8 V to 3.6 V.
This device is fully specified for partial Power-down applications using IOFF. The IOFF
circuitry disables the output, preventing the damaging backflow current through the
device when it is powered down.
2 Features and benefits
•Wide supply voltage range from 0.8 V to 3.6 V
•High noise immunity
•Complies with JEDEC standards:
–JESD8-12 (0.8 V to 1.3 V)
–JESD8-11 (0.9 V to 1.65 V)
–JESD8-7 (1.2 V to 1.95 V)
–JESD8-5 (1.8 V to 2.7 V)
–JESD8-B (2.7 V to 3.6 V)
•ESD protection:
–HBM JESD22-A114F Class 3A exceeds 5000 V
–MM JESD22-A115-A exceeds 200 V
–CDM JESD22-C101E exceeds 1000 V
•Low static power consumption; ICC = 0.9 μA (maximum)
•Latch-up performance exceeds 100 mA per JESD 78 Class II
•Inputs accept voltages up to 3.6 V
•Low noise overshoot and undershoot < 10 % of VCC
•IOFF circuitry provides partial Power-down mode operation
•Multiple package options
•Specified from -40 °C to +85 °C and -40 °C to +125 °C
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
2 / 21
3 Ordering information
Table 1. Ordering information
PackageType number
Temperature range Name Description Version
74AUP1G08GW -40 °C to +125 °C TSSOP5 plastic thin shrink small outline package; 5 leads;
body width 1.25 mm
SOT353-1
74AUP1G08GM -40 °C to +125 °C XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 x 1.45 x 0.5 mm
SOT886
74AUP1G08GF -40 °C to +125 °C XSON6 plastic extremely thin small outline package; no leads;
6 terminals; body 1 x 1 x 0.5 mm
SOT891
74AUP1G08GN -40 °C to +125 °C XSON6 extremely thin small outline package; no leads;
6 terminals; body 0.9 x 1.0 x 0.35 mm
SOT1115
74AUP1G08GS -40 °C to +125 °C XSON6 extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm
SOT1202
74AUP1G08GX -40 °C to +125 °C X2SON5 X2SON5: plastic thermal enhanced extremely
thin small outline package; no leads; 5 terminals;
body 0.8 x 0.8 x 0.35 mm
SOT1226
4 Marking
Table 2. Marking
Type number Marking code[1]
74AUP1G08GW pE
74AUP1G08GM pE
74AUP1G08GF pE
74AUP1G08GN pE
74AUP1G08GS pE
74AUP1G08GX pE
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5 Functional diagram
mna113
B
AY
2
14
Figure 1.  Logic symbol
mna114
2
4
&
1
Figure 2.  IEC logic symbol
mna221
A
B
Y
Figure 3.  Logic diagram
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
3 / 21
6 Pinning information
6.1 Pinning
74AUP1G08
B VCC
A
GND Y
001aaf025
1
2
3
5
4
Figure 4.  Pin configuration SOT353-1 (TSSOP5)
74AUP1G08
A
001aaf026
B
GND
n.c.
VCC
Y
Transparent top view
2
3
1
5
4
6
Figure 5.  Pin configuration SOT886 (XSON6)
74AUP1G08
A
001aaf027
B
GND
n.c.
VCC
Y
Transparent top view
2
3
1
5
4
6
Figure 6.  Pin configuration SOT891, SOT1115 and
SOT1202 (XSON6)
B VCC
GND
3
2
5
4
AY
aaa-003000
Transparent top view
74AUP1G08
1
Figure 7.  Pin configuration SOT1226 (X2SON5)
6.2 Pin description
Table 3. Pin description
PinSymbol
TSSOP5 and X2SON5 XSON6
Description
B 1 1 data input
A 2 2 data input
GND 3 3 ground (0 V)
Y 4 4 data output
n.c. - 5 not connected
VCC 5 6 supply voltage
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
4 / 21
7 Functional description
Table 4. Function table
H = HIGH voltage level; L = LOW voltage level.
Input Output
A B Y
L L L
L H L
H L L
H H H
8 Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage -0.5 +4.6 V
IIK input clamping current VI < 0 V -50 - mA
VIinput voltage [1] -0.5 +4.6 V
IOK output clamping current VO < 0 V -50 - mA
VOoutput voltage Active mode and Power-down mode [1] -0.5 +4.6 V
IOoutput current VO = 0 V to VCC - ±20 mA
ICC supply current - +50 mA
IGND ground current -50 - mA
Tstg storage temperature -65 +150 °C
Ptot total power dissipation Tamb = -40 °C to +125 °C [2] - 250 mW
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For TSSOP5 packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.
For XSON6 and X2SON5 packages: above 118 °C the value of Ptot derates linearly with 7.8 mW/K.
9 Recommended operating conditions
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.8 3.6 V
VIinput voltage 0 3.6 V
Active mode 0 VCC VVOoutput voltage
Power-down mode; VCC = 0 V 0 3.6 V
Tamb ambient temperature -40 +125 °C
Δt/ΔV input transition rise and fall rate VCC = 0.8 V to 3.6 V 0 200 ns/V
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
5 / 21
10 Static characteristics
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 °C
VCC = 0.8 V 0.70 × VCC - - V
VCC = 0.9 V to 1.95 V 0.65 × VCC - - V
VCC = 2.3 V to 2.7 V 1.6 - - V
VIH HIGH-level input voltage
VCC = 3.0 V to 3.6 V 2.0 - - V
VCC = 0.8 V - - 0.30 × VCC V
VCC = 0.9 V to 1.95 V - - 0.35 × VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VIL LOW-level input voltage
VCC = 3.0 V to 3.6 V - - 0.9 V
VI = VIH or VIL
IO = -20 μA; VCC = 0.8 V to 3.6 V VCC - 0.1 - - V
IO = -1.1 mA; VCC = 1.1 V 0.75 × VCC - - V
IO = -1.7 mA; VCC = 1.4 V 1.11 - - V
IO = -1.9 mA; VCC = 1.65 V 1.32 - - V
IO = -2.3 mA; VCC = 2.3 V 2.05 - - V
IO = -3.1 mA; VCC = 2.3 V 1.9 - - V
IO = -2.7 mA; VCC = 3.0 V 2.72 - - V
VOH HIGH-level output voltage
IO = -4.0 mA; VCC = 3.0 V 2.6 - - V
VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V - - 0.1 V
IO = 1.1 mA; VCC = 1.1 V - - 0.3 × VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.31 V
IO = 1.9 mA; VCC = 1.65 V - - 0.31 V
IO = 2.3 mA; VCC = 2.3 V - - 0.31 V
IO = 3.1 mA; VCC = 2.3 V - - 0.44 V
IO = 2.7 mA; VCC = 3.0 V - - 0.31 V
VOL LOW-level output voltage
IO = 4.0 mA; VCC = 3.0 V - - 0.44 V
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.1 μA
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.2 μA
ΔIOFF additional power-off
leakage current
VI or VO = 0 V to 3.6 V;
VCC = 0 V to 0.2 V
- - ±0.2 μA
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V
- - 0.5 μA
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
6 / 21
Symbol Parameter Conditions Min Typ Max Unit
ΔICC additional supply current VI = VCC - 0.6 V; IO = 0 A; VCC = 3.3 V [1] - - 40 μA
CIinput capacitance VCC = 0 V to 3.6 V; VI = GND or VCC - 0.8 - pF
COoutput capacitance VO = GND; VCC = 0 V - 1.7 - pF
Tamb = -40 °C to +85 °C
VCC = 0.8 V 0.70 × VCC - - V
VCC = 0.9 V to 1.95 V 0.65 × VCC - - V
VCC = 2.3 V to 2.7 V 1.6 - - V
VIH HIGH-level input voltage
VCC = 3.0 V to 3.6 V 2.0 - - V
VCC = 0.8 V - - 0.30 × VCC V
VCC = 0.9 V to 1.95 V - - 0.35 × VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VIL LOW-level input voltage
VCC = 3.0 V to 3.6 V - - 0.9 V
VI = VIH or VIL
IO = -20 μA; VCC = 0.8 V to 3.6 V VCC - 0.1 - - V
IO = -1.1 mA; VCC = 1.1 V 0.7 × VCC - - V
IO = -1.7 mA; VCC = 1.4 V 1.03 - - V
IO = -1.9 mA; VCC = 1.65 V 1.30 - - V
IO = -2.3 mA; VCC = 2.3 V 1.97 - - V
IO = -3.1 mA; VCC = 2.3 V 1.85 - - V
IO = -2.7 mA; VCC = 3.0 V 2.67 - - V
VOH HIGH-level output voltage
IO = -4.0 mA; VCC = 3.0 V 2.55 - - V
VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V - - 0.1 V
IO = 1.1 mA; VCC = 1.1 V - - 0.3 × VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.37 V
IO = 1.9 mA; VCC = 1.65 V - - 0.35 V
IO = 2.3 mA; VCC = 2.3 V - - 0.33 V
IO = 3.1 mA; VCC = 2.3 V - - 0.45 V
IO = 2.7 mA; VCC = 3.0 V - - 0.33 V
VOL LOW-level output voltage
IO = 4.0 mA; VCC = 3.0 V - - 0.45 V
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.5 μA
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.5 μA
ΔIOFF additional power-off
leakage current
VI or VO = 0 V to 3.6 V;
VCC = 0 V to 0.2 V
- - ±0.6 μA
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V
- - 0.9 μA
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
7 / 21
Symbol Parameter Conditions Min Typ Max Unit
ΔICC additional supply current VI = VCC - 0.6 V; IO = 0 A; VCC = 3.3 V [1] - - 50 μA
Tamb = -40 °C to +125 °C
VCC = 0.8 V 0.75 × VCC - - V
VCC = 0.9 V to 1.95 V 0.70 × VCC - - V
VCC = 2.3 V to 2.7 V 1.6 - - V
VIH HIGH-level input voltage
VCC = 3.0 V to 3.6 V 2.0 - - V
VCC = 0.8 V - - 0.25 × VCC V
VCC = 0.9 V to 1.95 V - - 0.30 × VCC V
VCC = 2.3 V to 2.7 V - - 0.7 V
VIL LOW-level input voltage
VCC = 3.0 V to 3.6 V - - 0.9 V
VI = VIH or VIL
IO = -20 μA; VCC = 0.8 V to 3.6 V VCC - 0.11 - - V
IO = -1.1 mA; VCC = 1.1 V 0.6 × VCC - - V
IO = -1.7 mA; VCC = 1.4 V 0.93 - - V
IO = -1.9 mA; VCC = 1.65 V 1.17 - - V
IO = -2.3 mA; VCC = 2.3 V 1.77 - - V
IO = -3.1 mA; VCC = 2.3 V 1.67 - - V
IO = -2.7 mA; VCC = 3.0 V 2.40 - - V
VOH HIGH-level output voltage
IO = -4.0 mA; VCC = 3.0 V 2.30 - - V
VI = VIH or VIL
IO = 20 μA; VCC = 0.8 V to 3.6 V - - 0.11 V
IO = 1.1 mA; VCC = 1.1 V - - 0.33 × VCC V
IO = 1.7 mA; VCC = 1.4 V - - 0.41 V
IO = 1.9 mA; VCC = 1.65 V - - 0.39 V
IO = 2.3 mA; VCC = 2.3 V - - 0.36 V
IO = 3.1 mA; VCC = 2.3 V - - 0.50 V
IO = 2.7 mA; VCC = 3.0 V - - 0.36 V
VOL LOW-level output voltage
IO = 4.0 mA; VCC = 3.0 V - - 0.50 V
IIinput leakage current VI = GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.75 μA
IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.75 μA
ΔIOFF additional power-off
leakage current
VI or VO = 0 V to 3.6 V;
VCC = 0 V to 0.2 V
- - ±0.75 μA
ICC supply current VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V
- - 1.4 μA
ΔICC additional supply current VI = VCC - 0.6 V; IO = 0 A; VCC = 3.3 V [1] - - 75 μA
[1] One input at VCC - 0.6 V, other input at VCC or GND.
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
8 / 21
11 Dynamic characteristics
Table 8. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 9
Symbol Parameter Conditions Min Typ [1] Max Unit
Tamb = 25 °C; CL = 5 pF
A, B to Y; see Figure 8 [2]
VCC = 0.8 V - 17.0 - ns
VCC = 1.1 V to 1.3 V 2.6 5.1 10.8 ns
VCC = 1.4 V to 1.6 V 1.6 3.7 6.5 ns
VCC = 1.65 V to 1.95 V 1.3 3.0 5.2 ns
VCC = 2.3 V to 2.7 V 1.1 2.4 4.0 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 1.0 2.2 3.5 ns
Tamb = 25 °C; CL = 10 pF
A, B to Y; see Figure 8 [2]
VCC = 0.8 V - 20.6 - ns
VCC = 1.1 V to 1.3 V 2.4 6.0 12.5 ns
VCC = 1.4 V to 1.6 V 2.0 4.3 7.6 ns
VCC = 1.65 V to 1.95 V 1.7 3.6 6.1 ns
VCC = 2.3 V to 2.7 V 1.4 2.9 4.8 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 1.3 2.7 4.2 ns
Tamb = 25 °C; CL = 15 pF
A, B to Y; see Figure 8 [2]
VCC = 0.8 V - 24.1 - ns
VCC = 1.1 V to 1.3 V 3.4 6.8 14.2 ns
VCC = 1.4 V to 1.6 V 2.3 4.9 8.6 ns
VCC = 1.65 V to 1.95 V 1.9 4.0 6.9 ns
VCC = 2.3 V to 2.7 V 1.7 3.4 5.5 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 1.5 3.1 4.8 ns
Tamb = 25 °C; CL = 30 pF
A, B to Y; see Figure 8 [2]
VCC = 0.8 V - 34.4 - ns
VCC = 1.1 V to 1.3 V 4.6 9.1 19.4 ns
VCC = 1.4 V to 1.6 V 3.4 6.4 11.5 ns
VCC = 1.65 V to 1.95 V 2.6 5.3 9.1 ns
VCC = 2.3 V to 2.7 V 2.3 4.5 7.2 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 2.2 4.2 6.2 ns
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
9 / 21
Symbol Parameter Conditions Min Typ [1] Max Unit
Tamb = 25 °C
f = 1 MHz; VI = GND to VCC
[3]
VCC = 0.8 V - 2.5 - pF
VCC = 1.1 V to 1.3 V - 2.7 - pF
VCC = 1.4 V to 1.6 V - 2.8 - pF
VCC = 1.65 V to 1.95 V - 2.9 - pF
VCC = 2.3 V to 2.7 V - 3.5 - pF
CPD power dissipation capacitance
VCC = 3.0 V to 3.6 V - 4.0 - pF
[1] All typical values are measured at nominal VCC.
[2] tpd is the same as tPLH and tPHL.
[3] CPD is used to determine the dynamic power dissipation (PD in μW).
PD = CPD x VCC
2 x fi x N + Σ(CL x VCC
2 x fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL x VCC
2 x fo) = sum of the outputs.
Table 9. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 9
-40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions
Min Max Min Max
Unit
CL = 5 pF
A, B to Y; see Figure 8 [1]
VCC = 1.1 V to 1.3 V 2.1 11.7 2.1 12.9 ns
VCC = 1.4 V to 1.6 V 1.5 7.5 1.5 8.3 ns
VCC = 1.65 V to 1.95 V 1.3 6.1 1.3 6.7 ns
VCC = 2.3 V to 2.7 V 1.0 4.8 1.0 5.3 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 0.9 4.3 0.9 4.8 ns
CL = 10 pF
A, B to Y; see Figure 8 [1]
VCC = 1.1 V to 1.3 V 2.2 13.6 2.2 15.0 ns
VCC = 1.4 V to 1.6 V 1.8 8.9 1.8 9.8 ns
VCC = 1.65 V to 1.95 V 1.6 7.2 1.6 7.9 ns
VCC = 2.3 V to 2.7 V 1.3 5.7 1.3 6.3 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 1.2 4.7 1.2 5.2 ns
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
10 / 21
-40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions
Min Max Min Max
Unit
CL = 15 pF
A, B to Y; see Figure 8 [1]
VCC = 1.1 V to 1.3 V 3.1 15.7 3.1 17.3 ns
VCC = 1.4 V to 1.6 V 2.1 10.1 2.1 11.2 ns
VCC = 1.65 V to 1.95 V 1.8 8.2 1.8 9.0 ns
VCC = 2.3 V to 2.7 V 1.6 6.5 1.6 7.2 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 1.5 5.9 1.5 6.5 ns
CL = 30 pF
A, B to Y; see Figure 8 [1]
VCC = 1.1 V to 1.3 V 4.1 21.8 4.1 24.0 ns
VCC = 1.4 V to 1.6 V 2.9 13.6 2.9 15.0 ns
VCC = 1.65 V to 1.95 V 2.4 10.9 2.4 12.1 ns
VCC = 2.3 V to 2.7 V 2.2 8.6 2.2 9.5 ns
tpd propagation delay
VCC = 3.0 V to 3.6 V 2.1 7.5 2.1 8.3 ns
[1] tpd is the same as tPLH and tPHL.
11.1 Waveforms and test circuit
mna614
tPHL tPLH
VM
VM
A, B input
Y output
GND
VI
VOH
VOL
Measurement points are given in Table 10.
Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.
Figure 8.  The data input (A or B) to output (Y) propagation delays
Table 10. Measurement points
Supply voltage Output Input
VCC VMVMVItr = tf
0.8 V to 3.6 V 0.5 x VCC 0.5 x VCC VCC ≤ 3.0 ns
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
11 / 21
001aac521
DUT
RT
VIVO
VEXT
VCC
RL
5 kΩ
CL
G
Test data is given in Table 11.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Figure 9.  Test circuit for measuring switching times
Table 11. Test data
Supply voltage Load VEXT
VCC CLRL [1] tPLH, tPHL tPZH, tPHZ tPZL, tPLZ
0.8 V to 3.6 V 5 pF, 10 pF, 15 pF and 30 pF 5 kΩ or 1 MΩ open GND 2 x VCC
[1] For measuring enable and disable times RL = 5 kΩ, for measuring propagation delays, setup and hold times and pulse width RL = 1 MΩ.
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
12 / 21
12 Package outline
Figure 10.  Package outline SOT353-1 (TSSOP5)
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
13 / 21
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT886 MO-252
sot886_po
04-07-22
12-01-05
Unit
mm
max
nom
min
0.5 0.04 1.50
1.45
1.40
1.05
1.00
0.95
0.35
0.30
0.27
0.40
0.35
0.32
0.6
A(1)
Dimensions (mm are the original dimensions)
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm SOT886
A1b
0.25
0.20
0.17
D E e e1
0.5
L L1
terminal 1
index area
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
1
6
2
5
3
4
6x
(2)
4x
(2)
A
Figure 11.  Package outline SOT886 (XSON6)
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
14 / 21
terminal 1
index area
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
SOT891
SOT891
05-04-06
07-05-15
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm
D
E
e1
e
A1
b
L
L1
e1
0 1 2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
mm 0.20
0.12
1.05
0.95
0.35
0.27
A1
max b E
1.05
0.95
D e e1L
0.40
0.32
L1
0.350.55
A
max
0.5 0.04
1
6
2
5
3
4
A
6×
(1)
4×
(1)
Note
1. Can be visible in some manufacturing processes.
Figure 12.  Package outline SOT891 (XSON6)
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
15 / 21
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1115
sot1115_po
10-04-02
10-04-07
Unit
mm
max
nom
min
0.35 0.04 0.95
0.90
0.85
1.05
1.00
0.95
0.55 0.3
0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 0.9 x 1.0 x 0.35 mm SOT1115
A1b
0.20
0.15
0.12
D E e e1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
L1
b
321
6 5 4
(6×)(2)
A1A
Figure 13.  Package outline SOT1115 (XSON6)
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
16 / 21
References
Outline
version
European
projection Issue date
IEC JEDEC JEITA
SOT1202
sot1202_po
10-04-02
10-04-06
Unit
mm
max
nom
min
0.35 0.04 1.05
1.00
0.95
1.05
1.00
0.95
0.55 0.35
0.40
0.35
0.32
A(1)
Dimensions
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
XSON6: extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm SOT1202
A1b
0.20
0.15
0.12
D E e e1L
0.35
0.30
0.27
L1
0 0.5 1 mm
scale
terminal 1
index area
D
E
(4×)(2)
e1e1
e
L
b
1 2 3
L1
6 5 4
(6×)(2)
A
A1
Figure 14.  Package outline SOT1202 (XSON6)
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
17 / 21
References
Outline
version
European
projection Issue date
IEC JEDEC EIAJ
SOT1226
sot1226_po
12-04-10
12-04-25
Unit
mm
max
nom
min
0.35 0.85
0.80
0.75
0.04 0.30
0.25
0.20
0.85
0.80
0.75
0.27
0.22
0.17
0.05
A(1)
Dimensions
Note
1. Dimension A is including plating thickness.
2. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
SOT1226
A1A3
0.128
0.040
D DhE b e
0.48
k L v
0.1
w y
0.05 0.05
scale
0
1
m
m
X
terminal 1
index area
D
E
A B
detail X
A
A1A3
C
y
C
y1
5 4
terminal 1
index area
D
h
L
b
k
e
AC B
v
Cw
21
0.20
0.27
0.22
0.17
y1
X2SON5: plastic thermal enhanced extremely thin small outline package; no leads;
5 terminals; body 0.8 x 0.8 x 0.35 mm
3
Figure 15.  Package outline SOT1226 (X2SON5)
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
18 / 21
13 Abbreviations
Table 12. Abbreviations
Acronym Description
CDM Charged Device Model
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MM Machine Model
14 Revision history
Table 13. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74AUP1G08 v.7 20171130 Product data sheet - 74AUP1G08 v.6
Modifications: •The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
•Legal texts have been adapted to the new company name where appropriate.
74AUP1G08 v.6 20120622 Product data sheet - 74AUP1G08 v.5
Modifications: •Package outline drawing of SOT1226 (Figure 15) modified.
74AUP1G08 v.5 20120412 Product data sheet - 74AUP1G08 v.4
Modifications: •Added type number 74AUP1G08GX (SOT1226)
•Package outline drawing of SOT886 (Figure 11) modified.
74AUP1G08 v.4 20111115 Product data sheet - 74AUP1G08 v.3
Modifications: •Legal pages updated.
74AUP1G08 v.3 20101007 Product data sheet - 74AUP1G08 v.2
74AUP1G08 v.2 20060629 Product data sheet - 74AUP1G08 v.1
74AUP1G08 v.1 20050720 Product data sheet - -
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
19 / 21
15 Legal information
15.1 Data sheet status
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product
development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local Nexperia
sales office. In case of any inconsistency or conflict with the short data sheet,
the full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory. Notwithstanding any damages that
customer might incur for any reason whatsoever, Nexperia's aggregate and
cumulative liability towards customer for the products described herein shall
be limited in accordance with the Terms and conditions of commercial sale of
Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification. Customers are responsible for the
design and operation of their applications and products using Nexperia
products, and Nexperia accepts no liability for any assistance with
applications or customer product design. It is customer’s sole responsibility
to determine whether the Nexperia product is suitable and fit for the
customer’s applications and products planned, as well as for the planned
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products. Nexperia does not accept
any liability related to any default, damage, costs or problem which is based
on any weakness or default in the customer’s applications or products, or
the application or use by customer’s third party customer(s). Customer is
responsible for doing all necessary testing for the customer’s applications
and products using Nexperia products in order to avoid a default of the
applications and the products or of the application or use by customer’s third
party customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or
the grant, conveyance or implication of any license under any copyrights,
patents or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Nexperia 74AUP1G08
Low-power 2-input AND gate
74AUP1G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 7 — 30 November 2017
20 / 21
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications. In the event that customer
uses the product for design-in and use in automotive applications to
automotive specifications and standards, customer (a) shall use the product
without Nexperia's warranty of the product for such automotive applications,
use and specifications, and (b) whenever customer uses the product for
automotive applications beyond Nexperia's specifications such use shall be
solely at customer’s own risk, and (c) customer fully indemnifies Nexperia
for any liability, damages or failed product claims resulting from customer
design and use of the product for automotive applications beyond Nexperia's
standard warranty and Nexperia's product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
15.4 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Nexperia 74AUP1G08
Low-power 2-input AND gate
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.
© Nexperia B.V. 2017. All rights reserved.
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 30 November 2017
Document identifier: 74AUP1G08
Contents
1 General description ............................................ 1
2 Features and benefits .........................................1
3 Ordering information .......................................... 2
4 Marking .................................................................2
5 Functional diagram ............................................. 2
6 Pinning information ............................................ 3
6.1 Pinning ...............................................................3
6.2 Pin description ................................................... 3
7 Functional description ........................................4
8 Limiting values .................................................... 4
9 Recommended operating conditions ................ 4
10 Static characteristics .......................................... 5
11 Dynamic characteristics .....................................8
11.1 Waveforms and test circuit .............................. 10
12 Package outline .................................................12
13 Abbreviations .................................................... 18
14 Revision history ................................................ 18
15 Legal information .............................................. 19