2.0x1.25mm SMD CHIP LED LAMP Part Number: APT2012ZGC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.0mm x1.25mm SMT LED,0.75mm thickness. The Green source color devices are made with InGaN z Low power consumption. on Sapphire Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package : 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE3711 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/20/2010 DRAWN: C.H.Han PAGE: 1 OF 5 ERP: 1203003552 Selection Guide Part No. Dice APT2012ZGC Lens Type Green (InGaN) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 280 450 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE3711 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/20/2010 DRAWN: C.H.Han PAGE: 2 OF 5 ERP: 1203003552 Green APT2012ZGC SPEC NO: DSAE3711 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/20/2010 DRAWN: C.H.Han PAGE: 3 OF 5 ERP: 1203003552 APT2012ZGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAE3711 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu DATE: SEP/20/2010 DRAWN: C.H.Han PAGE: 4 OF 5 ERP: 1203003552 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAE3711 REV NO: V.7 APPROVED: WYNEC CHECKED: Allen Liu APT2012ZGC DATE: SEP/20/2010 DRAWN: C.H.Han PAGE: 5 OF 5 ERP: 1203003552