36 SRIES Miniature PCB relays 10 A Burners, boilers and furnaces Jacuzzis and hot tubs Washing machines Hi-Fi systems Refrigerators Automation for blinds, grilles and shutters Electronic circuit boards Electronic kits FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to persons or property, caused as a result of the incorrect use or application of its products. 36 SERIES Miniature PCB relays 10 A 36 SERIES 36.11-4011 Printed circuit mount 10 A relay * New smaller size * 1 Pole changeover contacts * Miniature - "Sugar cube" package * DC coil - 360 mW * Wash tight: RT III * Cadmium Free contact material * RoHS conform A * 1 CO (SPDT), 10 A * Sugar cube size * PCB mount Copper side view Contact specification Contact configuration 1 CO (SPDT) Rated current/Maximum peak current Rated voltage/ Maximum switching voltage A V AC 10/15 (NO) - 5/10 (NC) 250/277 Rated load AC1 VA 2500 (NO) - 1250 (NC) Rated load AC15 (230 V AC) VA 500 (NO) Single phase motor rating (230 V AC) kW 0.37 (NO) Breaking capacity DC1: 28 V Minimum switching load A mW (V/mA) Standard contact material 10 (NO) 500 (5/100) AgSnO2 Coil specification Nominal voltage (UN) V AC (50/60 Hz) Rated power AC/DC VA (50 Hz)/W V DC Operating range -- 3 - 5 - 6 - 9 - 12 - 18 - 24 - 48 --/0.36 AC -- DC (0.75...1.3)UN Holding voltage AC/DC --/0.5 UN Must drop-out voltage AC/DC --/0.1 UN Mechanical life AC/DC cycles --/10 * 106 Electrical life at rated load AC1 cycles 50 * 103 Technical data I-2017, www.findernet.com Operate/release time Insulation between coil and contacts (1.2/50 s) Dielectric strength between open contacts Ambient temperature range Environmental protection ms 10/5 kV 3 V AC C 750 -40...+85 RT III Approvals (according to type) 3 36 SERIES Miniature PCB relays 10 A 36 SERIES Ordering information Example: 36 series miniature PCB relay, 1 CO (SPDT) - 10 A contacts, 12 V DC coil. A 3 6 . 1 A B C D 1 . 9 . 0 1 2 . 4 0 1 1 Series Type 1 = PCB mount A: Contact material 4 = AgSnO2 D: Special versions 1 = Wash tight (RT III) B: Contact circuit 0 = CO (SPDT) C: Options 1 = None No. of poles 1 = 1 pole, 10 A Coil version 9 = DC Coil voltage See coil specifications Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Type Coil version A B C D 36.11 DC 4 0 1 1 Technical data Insulation according to EN 61810-1 Nominal voltage of supply system V AC 230/400 Rated insulation voltage V AC 250 Pollution degree 2 Insulation between coil and contact set Type of insulation Basic Overvoltage category II Rated impulse voltage kV (1.2/50 s) 4 Dielectric strength V AC 2500 Insulation between open contacts Type of disconnection Dielectric strength Micro-disconnection V AC/kV (1.2/50 s) 750/1.5 Other data Shock resistance g 10 Bounce time: NO/NC ms 1/6 Vibration resistance (5...55 Hz): NO/NC g 14/8 Power lost to the environment without contact current W 0.4 with rated current W 1.4 mm 5 I-2017, www.findernet.com Recommended distance between relays mounted on PCB 4 36 SERIES Miniature PCB relays 10 A 36 SERIES Contact specification F 36 - Electrical life (AC) v contact current A Cycles Resistive load - cos = 1 Inductive load - cos = 0.4 Coil specifications DC coil data Nominal voltage R 36 - DC coil operating range v ambient temperature Coil code Operating range Umin UN V Resistance Rated coil consumption Umax R I at UN V V 3 9.003 2.2 3.9 25 120 mA 5 9.005 3.7 6.5 70 72 6 9.006 4.5 7.8 100 60 9 9.009 6.7 11.7 225 40 12 9.012 9 15.6 400 30 18 9.018 13.5 23.4 900 20 24 9.024 18 31.2 1600 15 48 9.048 36 62.4 6400 7.5 I-2017, www.findernet.com 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. Please see general technical information 5