CGH40120F-TB - Cree, Inc. - Datasheet.Directory

Subject to change without notice.

www.cree.com/wireless

CGH40120F

120 W, RF Power GaN HEMT

Cree’s CGH40120F is an unmatched, gallium nitride (GaN) high

electron mobility transistor (HEMT). The CGH40120F, operating

from a 28 volt rail, offers a general purpose, broadband solution

to a variety of RF and microwave applications. GaN HEMTs offer

high efciency, high gain and wide bandwidth capabilities making

the CGH40120F ideal for linear and compressed amplier circuits.

The transistor is available in a ange package.

Rev 2.5 – April 2012

FEATURES

• Up to 2.5 GHz Operation

• 20 dB Small Signal Gain at 1.0 GHz

• 15 dB Small Signal Gain at 2.0 GHz

• 120 W Typical PSAT

• 70 % Efciency at PSAT

• 28 V Operation

APPLICATIONS

• 2-Way Private Radio

• Broadband Ampliers

• Cellular Infrastructure

• Test Instrumentation

• Class A, AB, Linear ampliers suitable

for OFDM, W-CDMA, EDGE, CDMA

waveforms

Package Types: 440193

PN: CGH40120F

2CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Absolute Maximum Ratings (not simultaneous) at 25˚C Case Temperature

Parameter Symbol Rating Units Conditions

Drain-Source Voltage VDSS 84 Volts 25˚C

Gate-to-Source Voltage VGS -10, +2 Volts 25˚C

Storage Temperature TSTG -65, +150 ˚C

Operating Junction Temperature TJ225 ˚C

Maximum Forward Gate Current IGMAX 30 mA 25˚C

Maximum Drain Current1IDMAX 12 A 25˚C

Soldering Temperature2TS245 ˚C

Screw Torque τ80 in-oz

Thermal Resistance, Junction to Case3RθJC 1.5 ˚C/W 85˚C

Case Operating Temperature3,4 TC-40, +150 ˚C 30 seconds

Note:

1 Current limit for long term, reliable operation

2 Refer to the Application Note on soldering at www.cree.com/products/wireless_appnotes.asp

3 Measured for the CGH40120F at PDISS = 112 W.

4 See also, the Power Dissipation De-rating Curve on Page 7.

Electrical Characteristics (TC = 25˚C)

Characteristics Symbol Min. Typ. Max. Units Conditions

DC Characteristics1

Gate Threshold Voltage VGS(th) -3.8 -3.0 -2.3 VDC VDS = 10 V, ID = 28.8 mA

Gate Quiescent Voltage VGS(Q) – -2.7 – VDC VDS = 28 V, ID = 1.0 A

Saturated Drain Current2IDS 23.2 28.0 – A VDS = 6.0 V, VGS = 2.0 V

Drain-Source Breakdown Voltage VBR 120 – – VDC VGS = -8 V, ID = 28.8 mA

RF Characteristics3 (TC = 25˚C, F0 = 1.3 GHz unless otherwise noted)

Small Signal Gain GSS 17.5 19 – dB VDD = 28 V, IDQ = 1.0 A

Power Output4PSAT 100 120 – W VDD = 28 V, IDQ = 1.0 A

Drain Efciency5η55 70 – % VDD = 28 V, IDQ = 1.0 A, POUT = PSAT

Output Mismatch Stress VSWR – – 10 : 1 Y

No damage at all phase angles,

VDD = 28 V, IDQ = 1.0 A,

POUT = 100 W CW

Dynamic Characteristics

Input Capacitance CGS –35.3 – pF VDS = 28 V, Vgs = -8 V, f = 1 MHz

Output Capacitance CDS –9.1 – pF VDS = 28 V, Vgs = -8 V, f = 1 MHz

Feedback Capacitance CGD – 1.6 – pF VDS = 28 V, Vgs = -8 V, f = 1 MHz

Notes:

1 Measured on wafer prior to packaging.

2 Scaled from PCM data.

3 Measured in CGH40120F-TB.

4 PSAT is dened as IG = 2.8 mA.

5 Drain Efciency = POUT / PDC

3CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Typical Performance

Gain and Input Return Loss vs Frequency of the CGH40120F measured in

Broadband Amplier Circuit CGH40120F-TB

VDD = 28 V, IDQ = 1.0 A

Gain, Output Power and PAE vs Frequency of the CGH40120F measured in

Broadband Amplier Circuit CGH40120F-TB

VDD = 28 V, IDQ = 1.0 A

Gain (dB)

CGH40120F S21

CGH40120F S11

-25

-15

-5

800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800

Gain (dB)

Frequency (MHz)

100

125

150

Output Power (W), PAE (%)

Gain (dB)

1200 1250 1300 1350 1400

Output Power (W), PAE (%)

Gain (dB)

Frequency (MHz)

Gain Output Power PAE

Input Return Loss (dB)

Gain

PAE

Output Power

4CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Typical 800 MHz - 1300 MHz Performance

Gain, Output Power, and Power Added Efciency vs Frequency of the CGH40120F

measured in 0.8-1.3 GHz Amplier Circuit 03-000255.

VDD = 28 V, IDQ = 1.0 A

Typical Digital Video Broadcast (DVB) Performance

Output Power and Power Added Efciency vs Frequency of the CGH40120F

measured in DVB Amplier Circuit 03-000256.

VDD = 32 V, IDQ = 1.0 A

140

150

160

Power Added Effi

ciency (PAE) (%)

Output Power (W)

100

110

120

130

1350 1375 1400 1425 1450 1475 1500 1525 1550

Power Added Effi

ciency (PAE) (%)

Output Power (W)

Frequency (MHz)

Output Power (W)

PAE (%)

100

125

150

Power (W

) , PAE (%)

Gain (dB)

750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350

Power (W

) , PAE (%)

Gain (dB)

Frequency (MHz)

Small Signal Gain (dB) Assoc. Gain (dB)

Psat (W) PAE (%)

Gain (Assoc)

Gain (SS)

PAE

PSAT

5CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Typical Digital Video Broadcast (DVB) Performance

Small Signal Gain and Return Loss vs Frequency of the CGH40120F

measured in DVB Amplier Circuit 03-000256.

VDD = 32 V, IDQ = 1.0 A

Typical Constellation Chart and Spectral Mask using 16QAM OFDM

for a CGH40120F in DVB Amplier Circuit 03-000256 at 1450 MHz.

VDD = 32 V, IDQ = 1.0 A, PAVE = 40 W, Drain Efciency = 40 %, Signal PAR = 5.3 dB

19.30

Return Loss (dB)

Gain (dB)

-21.41

-35

-25

-15

-35

-25

-15

1200 1300 1400 1500 1600 1700 1800

Return Loss (dB)

Gain (dB)

Frequency (MHz)

S21

S11

6CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

CGH40120F

Typical Performance

Simulated Maximum Available Gain and K Factor of the CGH40120F

VDD = 28 V, IDQ = 1.0 A

Typical Noise Performance

Simulated Minimum Noise Figure and Noise Resistance vs Frequency of the CGH40120F

VDD = 28 V, IDQ = 1 A

Electrostatic Discharge (ESD) Classications

Parameter Symbol Class Test Methodology

Human Body Model HBM 1A > 250 V JEDEC JESD22 A114-D

Charge Device Model CDM 1 < 200 V JEDEC JESD22 C101-C

MAG (dB)

K Factor

Minimum Noise Figure (dB)

Noise Resistance (Ohms)

7CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

CGH40120F CW Power Dissipation De-rating Curve

Note 1. Area exceeds Maximum Case Operating Temperature (See Page 2).

CGH40120F Transient Power Dissipation De-rating Curve

Note 1. Area exceeds Maximum Case Operating Temperature (See Page 2).

Note 2. This transient de-rating curve assumes a 100usec pulse with a 10% duty cycle

with no power dissipated during the “off-cycle.”

100

120

Power Dissipation (W)

CGH40120F CW Power Dissipation De-rating Curve

0 25 50 75 100 125 150 175 200 225 250

Power Dissipation (W)

Maximum Case Temperature (°C)

Note 1

150

200

250

Power Dissipation (W)

CGH40120F Transient Power Dissipation De-Rating Curve

100

0 25 50 75 100 125 150 175 200 225 250

Power Dissipation (W)

Maximum Case Temperature (°C)

Note 1

8CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Thermal Resistance as a Function of Pulse Width

Note 1: This heating curve assumes zero power dissipation during the “off”

portion of the duty cycle.

Note 2: This data is for transient power dissipation at 230 W, Duty Cycle = 10 %.

Source and Load Impedances

Frequency (MHz) Z Source Z Load

500 2 + j3.3 5.14 + j0.04

1000 0.81 + j0.18 4.68 - j0.26

1500 0.75 - j1.56 3.44 - j0.77

2000 0.84 - j3 2.34 - j0.95

2500 1.2 - j4.43 2.7 - j2.56

3000 1.09 - j5.9 3.06 - j3.82

Note 1. VDD = 28V, IDQ = 1.0 A in the 440193 package.

Note 2. Optimized for power gain, PSAT and PAE.

Note 3. When using this device at low frequency, series resistors should

be used to maintain amplier stability.

1.20

1.40

1.60

1.80

2.00

Theta jc (C/W)

0.00

0.20

0.40

0.60

0.80

1.00

1.00E-08 1.00E-07 1.00E-06 1.00E-05 1.00E-04 1.00E-03 1.00E-02 1.00E-01 1.00E+00

Theta jc (C/W)

Pulse Length (seconds)

Z Source Z Load

9CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

CGH40120F-TB Demonstration Amplier Circuit Bill of Materials

Designator Description Qty

C1, C30 CAP, 27 PF +/- 5%, 250V, 0805, ATC 600F 2

C2 CAP, 1.2 pF, +/- 0.1 pF, 0603, ATC 600S 1

C3, C4 CAP, 3.9 pF, +/- 0.1 pF, 0603, ATC 600S 2

C5, C6 CAP, 4.7 pF, +/- 0.1 pF, 0603, ATC 600S 2

C11, C31 CAP, 27pF,+/-5%, 0603, ATC 600S 2

C12, C32 CAP, 100 pF, +/- 5%, 0603, ATC 600S 2

C13, C33 CAP, 470 pF +/- 5%,100 V, 0603, Murata 2

C14, C34 CAP, CER, 33000 pF, 100V, X7R, 0805, Murata 2

C15 CAP, 10 uF, 16V, SMT, TANTALUM 1

C35 CAP, CER, 1.0 uF, 100V, +/- 10%, X7R, 1210 1

C36 CAP, 33 uF, 100V, ELECT, FK, SMD 1

C20, C21 CAP, 5.6 PF +/- 0.1 pF, 0805, ATC 600F 2

C22, C23 CAP, 0.5 PF +/- 0.05 pF, 0805, ATC 600F 2

C24, C25 CAP, 1.2 PF +/- 0.1 pF, 0805, ATC 600F 2

R1 RES, 1/16W, 0603, 511 Ohms (≤5% tolerance) 1

R2 RES, 1/16W, 0603, 5.1 Ohms (≤5% tolerance) 1

L1 IND, 6.8 nH, 0603, L-14C6N8ST 1

L2 IND, FERRITE, 220 OHM, 0805, BLM21PG221SN1 1

J1, J2 CONN, N-Type, Female, 0.500 SMA Flange 2

J3 CONN, Header, RT> PLZ, 0.1 CEN, LK, 9 POS 1

-PCB, RO4003, Er = 3.38, h = 32 mil 1

Q1 CGH40120F 1

CGH40120F-TB Demonstration Amplier Circuit

10 CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

CGH40120F-TB Demonstration Amplier Circuit Schematic

CGH40120F-TB Demonstration Amplier Circuit Outline

11 CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Typical Package S-Parameters for CGH40120F

(Small Signal, VDS = 28 V, IDQ = 1.0 A, angle in degrees)

Frequency Mag S11 Ang S11 Mag S21 Ang S21 Mag S12 Ang S12 Mag S22 Ang S22

500 MHz 0.961 -177.60 4.19 80.16 0.006 13.42 0.807 -179.57

600 MHz 0.961 -178.85 3.49 77.38 0.006 15.30 0.808 -179.85

700 MHz 0.961 -179.89 2.99 74.72 0.006 17.30 0.810 179.89

800 MHz 0.961 179.22 2.61 72.16 0.007 19.36 0.811 179.66

900 MHz 0.961 178.41 2.32 69.66 0.007 21.47 0.813 179.42

1.0 GHz 0.960 177.67 2.09 67.22 0.007 23.59 0.815 179.18

1.1 GHz 0.960 176.96 1.89 64.83 0.007 25.71 0.817 178.94

1.2 GHz 0.960 176.28 1.73 62.49 0.007 27.81 0.819 178.68

1.3 GHz 0.960 175.63 1.60 60.18 0.007 29.86 0.822 178.41

1.4 GHz 0.960 174.99 1.48 57.92 0.008 31.86 0.824 178.13

1.5 GHz 0.960 174.36 1.38 55.69 0.008 33.80 0.826 177.83

1.6 GHz 0.960 173.73 1.30 53.50 0.008 35.65 0.828 177.52

1.7 GHz 0.960 173.11 1.22 51.35 0.008 37.40 0.830 177.19

1.8 GHz 0.959 172.49 1.15 49.23 0.009 39.06 0.832 176.84

1.9 GHz 0.959 171.86 1.10 47.15 0.009 40.61 0.835 176.47

2.0 GHz 0.959 171.23 1.04 45.09 0.010 42.04 0.837 176.09

2.1 GHz 0.958 170.59 0.99 43.07 0.010 43.36 0.839 175.69

2.2 GHz 0.958 169.95 0.95 41.08 0.011 44.56 0.840 175.28

2.3 GHz 0.957 169.29 0.91 39.12 0.011 45.64 0.842 174.85

2.4 GHz 0.957 168.63 0.88 37.18 0.012 46.60 0.844 174.40

2.5 GHz 0.956 167.95 0.85 35.28 0.012 47.45 0.845 173.93

2.6 GHz 0.956 167.26 0.82 33.39 0.013 48.18 0.847 173.45

2.7 GHz 0.955 166.56 0.79 31.53 0.014 48.80 0.848 172.94

2.8 GHz 0.954 165.84 0.77 29.68 0.014 49.32 0.849 172.43

2.9 GHz 0.953 165.10 0.75 27.86 0.015 49.74 0.850 171.89

3.0 GHz 0.952 164.34 0.73 26.04 0.016 50.05 0.851 171.33

3.2 GHz 0.950 162.75 0.70 22.46 0.018 50.40 0.852 170.17

3.4 GHz 0.948 161.07 0.68 18.91 0.020 50.38 0.852 168.93

3.6 GHz 0.944 159.27 0.66 15.37 0.023 50.02 0.852 167.61

3.8 GHz 0.941 157.33 0.65 11.82 0.025 49.32 0.850 166.19

4.0 GHz 0.936 155.23 0.64 8.23 0.029 48.30 0.848 164.68

4.2 GHz 0.931 152.94 0.64 4.57 0.033 46.94 0.844 163.06

4.4 GHz 0.925 150.43 0.64 0.80 0.037 45.24 0.840 161.32

4.6 GHz 0.917 147.66 0.65 -3.12 0.042 43.18 0.834 159.44

4.8 GHz 0.908 144.59 0.66 -7.23 0.048 40.72 0.826 157.41

5.0 GHz 0.896 141.14 0.68 -11.60 0.055 37.83 0.817 155.20

5.2 GHz 0.883 137.25 0.71 -16.29 0.064 34.45 0.805 152.81

5.4 GHz 0.866 132.84 0.74 -21.37 0.074 30.53 0.791 150.19

5.6 GHz 0.845 127.78 0.78 -26.94 0.086 25.97 0.774 147.33

5.8 GHz 0.820 121.95 0.83 -33.09 0.101 20.69 0.755 144.21

6.0 GHz 0.789 115.17 0.88 -39.95 0.118 14.58 0.731 140.79

Download this s-parameter le in “.s2p” format at http://www.cree.com/products/wireless_s-parameters.asp

12 CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Product Dimensions CGH40120F (Package Type — 440193)

13 CGH40120F Rev 2.5

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

USA Tel: +1.919.313.5300

Fax: +1.919.869.2733

www.cree.com/wireless

the Cree logo are registered trademarks of Cree, Inc.

Disclaimer

Specications are subject to change without notice. Cree, Inc. believes the information contained within this data sheet

to be accurate and reliable. However, no responsibility is assumed by Cree for any infringement of patents or other

rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent

or patent rights of Cree. Cree makes no warranty, representation or guarantee regarding the suitability of its products

for any particular purpose. “Typical” parameters are the average values expected by Cree in large quantities and are

provided for information purposes only. These values can and do vary in different applications and actual performance

can vary over time. All operating parameters should be validated by customer’s technical experts for each application.

Cree products are not designed, intended or authorized for use as components in applications intended for surgical

implant into the body or to support or sustain life, in applications in which the failure of the Cree product could result

in personal injury or death or in applications for planning, construction, maintenance or direct operation of a nuclear

facility.

For more information, please contact:

Cree, Inc.

4600 Silicon Drive

Durham, North Carolina, USA 27703

www.cree.com/wireless

Sarah Miller

Marketing & Export

Cree, RF Components

1.919.407.5302

Ryan Baker

Marketing

Cree, RF Components

1.919.407.7816

Tom Dekker

Sales Director

Cree, RF Components

1.919.407.5639