KL SMD TSS KL SERIES OUTLINE DIMENSIONS KL3R20 2.0 2.5 0.3 17 20 200V30A 1.5 0.2 Package : 1F 2.0 4.2 1.2 0.3 1.2 0.3 0.10.1 2.0 0.3 0.2 0.9 5.0 0.3 mm Web For details of outline dimensions, refer to our web site or the Semiconductor Short Form Catalog. As for the marking, refer to the specification "Marking,Terminal Connection." RATINGS Absolute Maximum Ratings Item Symbol T125unless otherwise specified Conditions Ratings Unit Storage Temperature Tstg 40125 Junction Temperature Tj 125 Maximum Off-State Voltage VDRM 175 V Surge On-State Current ITSM 10/1000 s Non-repetitive 8/20 s Tl=25 Electrical Characteristics Tl=25 Breakover Voltage Off-State Current T125unless otherwise specified MIN 180 V IDRM VD=VDRM MAX 10 A MIN 100 mA TYP 1.8 V MAX 30 pF MAX 250 V IH On-State Voltage VT IT=2A Junction Capacitance Cj f=1kHz U181 A VBO Pulse measurement 34 100 Pulse measurement Holding Current Clamping Voltage 30 VCL OSC=1Vrms VD=50V dv/dt=100V/ s www.shindengen.co.jp/product/semi/ 1F KL3R20 Package CHARACTERISTIC DIAGRAMS Sine wave 50Hz 50Hz sine wave is used for measurements. Typical Semiconductor products generally have characterristic variation. Typical a statistical average of the devices ability. www.shindengen.co.jp/product/semi/ U181 35 1. 2. OA AV / 3. 4. 5. 6. 7. 8. Notes 1. If you wish to use any such product, please be sure to refer to the specifications issued by Shindengen. 2. All products described or contained herein are designed with a quality level intended for use in standard applications requiring an ordinary level of reliability. If these products are to be used in equipment or devices for special or specific applications requiring an extremely high grade of quality or reliability in which failures or malfunctions of products may directly affect human life or health, a local Shindengen office must be contacted in advance to confirm that the intended use of the product is appropriate. Shindengen products are grouped into the following three applications according the quality grade. Standard applications Computers, office automation and other office equipment, communication terminals, test and measurement equipment, audio/visual equipment, amusement equipment, consumer electronics, machine tools, personal electronic equipment, industrial equipment, etc. Special applications Transportation equipment (vehicles, ships, etc.), trunk-line communication equipment, traffic signal control systems, anti-disaster/crime systems, safety equipment, medical equipment, etc. Specific applications Nuclear reactor control systems, aircraft, aerospace equipment, submarine repeaters, life support equipment and systems, etc. 3. Although Shindengen continuously endeavors to enhance the quality and reliability of its products, customers are advised to consider and take safety measures in their design, such as redundancy, fire containment and anti-failure, so that personal injury, fires, or societal damages can be prevented. 4. Please note that all information described or contained herein is subject to change without notice due to product upgrades and other reasons. When buying Shindengen products, please contact the Companys offices or distributors to obtain the latest information. 5. Shindengen shall not bear any responsibility with regards to damages or infringement of any third-party patent rights and other intellectual property rights incurred due to the use of information on this website. 6. The information and materials on this website neither warrant the use of Shindengen's or any third partys patent rights and other intellectual property rights, nor grant license to such rights. 7. In the event that any product described or contained herein falls under the category of strategic products controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, exporting of such products shall require an export license from the Japanese government in accordance with the above law. 8. No reprinting or reproduction of the materials on this website, either in whole or in part, is permitted without proper authorization from Shindengen.