WINSLOW ADAPTICs Data Sheet - Screw Machined I.C. Sockets W30500TRC - W30500T - W30500G - W30500TTRC The W30500 Series uses a screw machined half hard brass outer pin with a beryllium copper contact. The outer pin has 3 plating options; RoHS compliant Tin, Tin/Lead or Gold. The beryllium copper contact can be Gold or pure Tin. Moulding material is 30%GF PBT rated to UL 94 V-0. Part are designed and packaged for automatic PCB loading machines. The following table explains the plating options for the range. SUFFIX OUTER PLATING CONTACT PLATING TRC Pure Tin (RoHS Compliant) Gold T Tin Lead Gold G Gold (RoHS Compliant) Gold TTRC Pure Tin (RoHS Compliant) Pure Tin (RoHS Compliant) * Point of contact ** Plugable Depth 2.66* 4.10** B 1.35 Dia 0.50 Dia A 1.6 2.54 2.8 3.0 Pitch WINSLOW ADAPTICs Data Sheet - Screw Machined I.C. Sockets W30500TRC - W30500T - W30500G - W30500TTRC PART NUMBER* PINS PITCH A B W30504 4 7.62 5.00 10.14 W30506 6 7.62 7.54 10.14 W30508 8 7.62 10.08 10.14 W30510 10 7.62 12.62 10.14 W30514 14 7.62 17.70 10.14 W30516 16 7.62 20.24 10.14 W30518 18 7.62 22.78 10.14 W30520 20 7.62 25.32 10.14 W30522 22 10.16 27.86 12.68 W30524/3 24 7.62 30.40 10.14 W30524/4 24 10.16 30.40 12.68 W30524 24 15.24 30.40 17.66 W30528/3 28 7.62 35.48 10.14 W30528/4 28 10.16 35.48 12.68 W30528 28 15.24 35.48 17.66 W30532/4 32 10.16 40.56 12.68 W30532 32 15.24 40.56 17.66 W30536 36 15.24 45.64 17.66 W30540 40 15.24 50.72 17.66 W30542 42 15.24 53.26 17.66 W30548 48 15.24 60.88 17.66 W30550 50 15.24 63.42 17.66 W30550/9 50 22.86 63.42 25.38 W30552 52 15.25 65.96 17.66 W30552/9 52 22.86 65.96 25.38 W30564 64 22.86 81.20 25.38 * When ordering please remember to add your required suffix to the part number WINSLOW ADAPTICs Data Sheet - Screw Machined I.C. Sockets W30500TRC - W30500T - W30500G - W30500TTRC General Specifications. Unless stated all values are typical. Contact Resistance: Capacitance: See test results below. 0.35pF max *Plating: Outer; W30500TRC W30500T W30500G W30500TTRC Current Rating: 5.0 amps Material: Brass outer, beryllium copper inner. Nickel 2.5Um/Pure Tin 6.0Um 60/40 tin/lead 2-3Um. Nickel 2.5Um/Gold 0.1Um Nickel 2.5Um/Pure Tin 6.0Um *Plating: Inner; W30500TRC Nickel 2.5Um/Gold 0.1Um W30500T Nickel 2.5Um/Gold 0.1Um W30500G Nickel 2.5Um/Gold 0.1Um W30500TTRC Nickel 2.5Um/ Pure Tin 0.1Um Note: Other plating specs available. Please contact sales@winslowadaptics.com with your requirements. Insertion Force: Withdrawal Force: Force to remove from moulding: 350 grams per pin 0.018" diameter 250 grams per pin 0.018" diameter. 12lb minimum Test Data and Results (Sockets Tested--W30524T) Test Conditions Result Vibration 10 to 2,000Hz at 20g's No mechanical damage to assembly or loss of continuity Shock 150g's No mechanical damage to assembly or loss of continuity Thermal Shock -65 to +150 degrees Centigrade No change in insulation resistance, loss of continuity or mechanical damage to assembly. Life vs Contact Resistance 1,000 cycles insertion/ withdrawal of IC lead device. Average: Before test; 5.8mOhms After test; 6.9mOhms Fungus Resistance of Moulding Non-Nutrient Salt Spray Contact resistance remained 14mOhm. No galvanic corrosion visible at 50X Endurance & Exposure to Ammonium Sulphide Exposure after 10 insertions of DIP IC. New tin-plated contact resistance 11mOhms Atmosphere (contact) Exposure after 10 insertions of DIP IC New gold-plated contact resistance 5mOhms max. Continuity of Soldered Connectors Resistance change was less than 10% WINSLOW ADAPTICs Data Sheet - Screw Machined I.C. Sockets W30500TRC - W30500T - W30500G - W30500TTRC General Specifications. Unless stated all values are typical. Moulding Material: Glass-reinforced Polyester (PBT) Insulation Resistance: 1010 Ohms (contact to contact) at 500VDC Arc Resistance: 145 seconds at 23 degrees C Electrical Strength: 121KV/cm at 23 degrees C Dielectric Constant: 3.9 (48 hrs 90%RH) at 100Hz 23 degrees C 4.5 at 100Hz 121 degrees C 3.7 (48 hrs 90%RH) at 1MHz 23 degrees C 4.3 at 1MHz 121 degrees C Dissipation Factor: 0.0077 (48 hrs 30%RH) at 100Hz 23 degrees C 0.0300 at 100Hz 121 degrees C 0.0150 (48 hrs 30%RH) at 1MHz 23 degrees C 0.0200 at 1MHz 121 degrees C Volume Resistivity: 3 x 1013ohms-CM (48 hrs 90%RH) at 25 degrees C 1013ohms-CM at 121 degrees C Operating Temperature: Flammability: -65 to 150 degrees C UL94V-0 Note: Dimensions are subject to change without prior notice. sales@winslowadaptics.com Custom Upgrades DIP Support products from Winslow Adaptics Package Conversion www.winslowadaptics.com Pitch Change Also available from Winslow Adaptics are cost effective, time saving solutions to test, obsolescence, supply problems and upgrades. OEMs can upgrade equipment with custom Adaptics utilising additional logic, often saving considerable cost and time on re-design. If lead-time becomes an issue contact us for a suitable package converter. We specialise in conversion of all package lead-frames.