Trunk & Distribution Connectors
GRS™ 3-Piece Series
Product Information
© 2009 Corning Gilbert Inc. G-1400-596 01/09
GRS Connector Specifications
Designed to meet SCTE interface
specifications
Bandwidth: 5 MHz to 1 GHz
Operating Range: -40°F to +140°F
Nominal Impedance: 75 ohms
Shielding Effectiveness: > 130 dB
Return Loss: 30 dB minimum
Insertion Loss: < 0.15 dB (pin
types)
Cable Retention: Exceeds cable
manufacturers' maximum pulling
tension specifications
Support sleeve located in main nut assembly minimizes
pull back required to insert cable into connector
1
Independent seizure of center and outer conductors
provides assurance of proper retention to cable
2
Visible entry of center conductor into
seizing mechanism (no blind entry)
3
4Unique collet closing mechanism
preserves reusability
5Domed insulator prevents possibility
of moisture collecting
6Brass pins with bright acid
tin plating for excellent RF
conductivity
GRS design compensates for potential
tolerance mismatches between the
cable and connector
GRS extension connectors incorporate a
one-piece continuous pin, providing
excellent electrical continuity
7
8
The industry leading GRS 3-piece trunk & distribution connector series is designed for
optimal performance in high bandwidth, two-way and digital communication
systems.
The GRS Series provides independent seizing of the cable's center and outer
conductors during the installation process, guaranteeing proper cable retention.
Uniquely, the GRS design compensates for potential tolerance mismatches between
the cable and connector.
The connector configuration allows a full view of the center conductor entering the center
conductor seizing mechanism, eliminating the "blind entry" associated with 2-piece
connector installation.
Cable "pullback" is minimized, preventing cable deformation. GRS extension
connectors, used extensively in system upgrades, incorporate a one-piece continuous
pin, providing excellent long-term performance.