) nition AMP printed circuit edge connectors with bifurcated leaf-type contacts are designed for applications demanding the highest levels of conductivity and reliability. These connectors are UL recognized, flame retardant and meet all industry requirements for low cost, high performance connections to .062 [1.57] thick single- and double- sided pc boards. For optimum versatility, AMP offers these connectors in numerous styles and sizes including: board-to-wire connectors which accept from 2 to 24 crimp, snap-in contacts for single-sided boards: and 6 through 24-circuit board-to- board connectors that have preloaded contacts with solder tabs for horizontal and 90 single-sided mother/daughter board packaging. Bifurcated Leaf Connectors Reliability and economy are realized through many built- in design features. Contacts are stamped and formed from high conductivity brass, phosphor bronze or beryllium copper and are plated with either tin or gold for long life and excellent resistance to corrosion. A leaf-type design assures a firm wiping action with pc board pads to establish intimate electrical contact while the bifurcated design achieves contact redundancy. All crimp, snap-in contacts are easily inserted into the connector housingsno tooling required. Contacts are just as easily removed using a simple extraction tool. They accept a wire size range of AWG 30-18 [.05-0.9 mm2] and insulation diameters up to .100 [2.54]. AMP supplies these contacts in strip form for automatic machine application or as loose piece for prototypes and repairs. Need More Information? Call the AMP Product Information Center: 1-800-522-6752. The Product Information Center is staffed with specialists well-versed in all AMP products. The Center can provide you with: Engineering Support Catalogs Technical Documents Product Samples AMP Authorized Distributor Locations rite 65459 fool =42 apimal ole meee Features MM Bifurcated leaf-type contacts provide firm wiping action for positive electrical contact Connectors accommodate full range of .055-.070 [1.4-1.78] thick pc boards @ 94 V-0 polyester thermoplastic unreinforced material @ Contacts availabie in brass, phosphor bronze and beryllium copper, with tin or gold plating B Crimp, snap-in contacts accept AWG 30-18 [0.05- 0.9 mm2] and insulation diameters up to .100 [2.54] Hf Individual contacts require no tooling for loading into housings, and are removable for circuit change or repair @ High-speed automatic machine termination assures reliability at a low applied cost M Recognized under the Component Program of Underwriters Laboratories Inc. File No. E28476 SA\ B Certified by Canadian Standards Association. File No. LR16455 @: Specifications subject to change. Consult AMP Incorporated for latest design specifications. Dimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. Copyright 1992 by AMP Incorporated. All International Rights Reserved. AMP, AMP-O-LECTRIC, AMP-O-MATIC, AMPOMATOR, CERTI-CRIMP Trademarks of AMP Incorporated.Bifurcated Leaf Connectors Application Specifications 114-1015 Product Specifications 108-1020 Performance Characteristics The performance applies to free-hanging and panel- mount connectors. The maximum current that can be carried by the connectors is limited by the maximum housing operating temperature, which is +105C, and the contact temperature rise, which is +30C. There are several variables that have a direct effect on this maximum current-carrying capability for a given connector. They include the following: Wire SizeLarger wire will carry more current since it has less internal resistance to current, and thus generates less heat. The wire also conducts heat away from the connector. Connector Sizein general, the more circuits in a connector, the less current can be carried. Ambient Temperature The higher the ambient temperature, the less current can be carried. Durability25 mating cycles Dielectric Withstanding Voltage 1.25 kVAC Insulation Resistance 1000 megohms min. initial Voltage Rating250 VAC Connector Mating10 Ib. [44.5 N] max. per contact Connector Unmating0.2 Ib. [0.89 N] min. per contact Contact Retention10 Ib. (44.5 N] min. For drawings, technical data or samples, contact your AMP sales engineer or cail the AMP Product Information Center 1-800-522-6752. Dimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. ire Si Termination Tensile Force Wire Size Resistance Per Contact Test Resistance (Wire Pullout) AWG mm2 Current Milliohms Force (Min.) (Amps) (Max. Init.) Ibs. N 24 0.2 1.0 4.0 10 44.5 22 0.3-0.4 1.5 3.75 15 66.7 20 0.5-0.6 2.0 3.50 25 111.2 18 0.8-0.9 3.0 3.00 35 155.7 110 9 os 100 Zr 90 wo 52 80 as E@ 70 - 2 60 Ps 50 f+ 40 6 9% ge % Ex 10 oO kK 0 o 1 9 110 sg 100 a Sa 90 52 80 as E 70 eS 60 OE 6 50 ae o + 40 Sz 30 ga 20 E E< 10 ec 0 24 Position 12 Position 12 Position Maximum Housing Temperature wenn Maximum Connector Limit, 105C (221F) Component Recognition 30C (54F) T-rise 2 Position ae 4.0 amperes for 2 position. 3.5 amperes for 12 position. 3.0 amperes for 24 position. 2 3 4 5 6 Current, amp Figure i Terminal Temperature vs. Current/Circuit 24 AWG Wire Maximum Housing Temperature ween Maximum Connector Limit, 105C (221F) Component Recognition 30C (54F) T-rise 6.0 amperes for 2 position. 5.0 amperes for 12 position. 4.0 amperes for 24 position. 2 Position 4 6 8 10 Current, amp Figure 2 Terminal Temperature vs. Current/Circuit 18 AWG Wire AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 # PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Bifurcated Leaf Connectors Housing Assemblies, Preloaded with Solder Tail Contacts for Single-Sided PC Boards Style A Mounting ON NY pc boards Adee eee itd Style B Mounting %y Z , y : pc boards Material: Housings: Unreinforced polyester thermoplastic. 94V-0 rated, natural Contacts: .010 [0.25] brass, pre-tin plated For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752. AMP Style A For Vertical Mounting Dimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. Chart contains dimensions in inches over millimeters. 375 125 5, Leg J 13.18] Dia. 07 [9.53] 185 [1.94] ~ 8.94] Cy Ty a) .090 ats L - ne | rant ! t [2.29] [8.26] a H | L- be phe Lai 7 _~ oT ros ; 213 ' | 4156 [5.44] >| 13.96) YP .250 .A55 .200+.020 .030 4.010 (6.35) M1567" [5.08+0.51} [0.76] A 20.25) >| B c DB Style B For Horizontal Mounting .375 125 ,, [3.18] ov | 2 155 [1.91] [3.94] td Ton 1 44 LOStm S57... 4 Pro | rpc Snnee WF D Ww 7 =_ 213 1 56 } [5.41] >| }- [3.96] 250 .030 2.010 Typ. [6.35] {0.76] A 10.25) > iS 5 c D 1 | . Part Numbers Dimensions No. of Style A Solder Tabs Style B Solder Tabs Circuits A 8 c 0 With Mounting Without Mounting With Mounting Without Mounting Ears Ears Ears Ears 969 1.077 1.389 1.701 8 24.61 27.36 35.28 43.21 640133-6 1.125 1.233 1.545 (1.857 7 28.58 31.32 39.24 47.17 640133-7 1.281 1.389 1.701 2.013 8 Boek Shes aael Sid3 640140-8 640133-8 640141-8 640134-8 1.438 1.546 1.858 2.170 9 36.53 39.27 47.19 55.12 640133-9 1.594 1,702 2.014 2.326 10 tong doom ePie Zoan 1-640140-0 1-640133-0 1-640134-0 1.750 1.858 2.170 2.482 4 44.45 47.19 55.12 63.04 | 1640140-1 1.906 2.014 2.326 2.638 12 48.41 51.16 59.08 67.01 1-640133-2 1-640134-2 2.219 2.327 2.639 2.951 14 56.36 59.11 67.03 74.96 1-640133-4 2.375 2.483 2.795 3.107 15 ae eee Sagi 1-640140-5 1-640133-5 4-640141-5 2.688 2.796 3.108 3.420 17 2 oee eee oe B20 1-640140-7 1-640134-7 2.844 2.952 3.264 3.576 18 72.24 7498 82.91 90.83 1-640133-8 3.469 3.577 3.889 4.201 22 88.11 90.86 98.78 106.71 2-640133-2 2-640194-2 3.781 3.889 4.201 4.513 24 96.04 98.78 106.71 114.63 27640140-4 2-640141-4 Notes: 1. Connectors for use with .055-.070 [1.4-1.78] thick pe boards. 2. Both Style A and Style B solder tabs fit .062 +.005 (1.57 + 0.13] diameter board holes. 3. Recommended .015 [0.38] x 45 chamfer both sides of pc boards. AMP INCORPORATED, HARRISBURG, PA 17105: PHONE: 717-564-0100 TWX: 510-657-4110 @ PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Bifurcated Leaf Connectors Housings for Single-Sided PC Boards Material: Unreinforced polyester thermoplastic, 94 V-O rated, natural For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752. AMP Dimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. Chart contains dimensions in inches over millimeters. 05 0 7] -375 125 5, [3.18] D8 075 .240 (4.39) 11.91} [6.1] +| 076 *oy -150 +.000 +0,00- 40.2: Min. Foto Cos! . _ 11.937 (3.81) ~ a ~ et Min. (if f2 aa polarization 2.39) >| ry is required) f ' \ \ 12 Min 92] . | ! Recommended .015 [0.38], min. x 45 i I charnfer both sides of | pe board. Lf Circuit path width.090 [2.29] min. 156 5, [3.96] | P- Recommended PC Board Layout (Circuitry Side) Dimensions ___Part Numbers (No. of With Without A B c D E Mounting Mounti hg 344 500 .766 1.078 333 2 8.74 12.7 19.46 27.38 8.46 640136-2 -500 656 922 1.234 489 3 12.7 16.66 23.42 31.34 12.42 640137-3 640136-3 -656 812 1.078 1.390 645 4 16.66 20.62 27.38 35.31 16.38 640136-4 813 969 1.235 1.547 -802 5 20.65 24.61 31.37 39.29 20.37 640136-5 -969 1.125 1.391 1.703 -958 6 24.61 28.58 35.33 43.26 24.33 640137-6 640136-6 1.125 1.281 1.547 1.859 1.114 7 28.58 32.54 39,29 47.22 28.3 640136-7 1.281 1.437 1.703 2.015 1.270 8 32.54 36.5 43.26 51.18 32.26 640136-8 1.438 1.594 1.860 2.172 1.427 9 36.53 40.49 47.24 55.17 36.25 640137-9 640136-9 1.594 1.750 2.016 2.328 1.583 10 40.49 44.45 51.21 59.13 40.21 1-640137-0 1-640136-0 1.750 1.906 2.172 2.484 1.739 41 44.45 48.41 55.17 63.09 44.17 1-640136-1 1.906 2.062 2.328 2.640 1.895 12 48.41 52,37 59.13 67.06 48.13 1-640137-2 1-640136-2 2.219 2.375 2.641 2.953 2.208 14 56.36 60,33 67.08 75.01 56.08 1-640137-4 1-640136-4 2.375 2.531 2.797 3.109 2.364 15 60.33 64.29 71.04 78.97 60.05 {-640137-5 1-640136-5 2.531 2.687 2.953 3.265 2.520 16 64.29 68.25 75.01 82.93 64.01 1-640137-6 1-640136-6 2.844 3.000 3.266 3.578 2.833 18 72.24 76.2 82.96 90.88 71.96 1-640137-8 1-640136-8 3.156 3.312 3.578 3.890 3.145 20 80.16 84.12 90.88 98.81 79.88 2-640137-0 2-640136-0 3.469 3.625 3.891 4.203 3.458 22 88.11 92.08 98.83 106.76 87.83 2-640137-2 2-640136-2 3.625 3.781 4.047 4.359 3.614 23 92.08 96.04 102.79 110.72 91.8 2-640136-3 3.781 3.S37 4.203 4.515 3.770 24 96.04 100 106.76 114.68 95.76 2-640137-4 2-640136-4 Notes: 1. Housings for use with .055-.070 [1.4-1.78] thick pc boards. 2. For locking plug data, see page 6. 3. Contacts for these housings are shown on page 5. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 # PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752Bifurcated Leaf Connectors Crimp, Snap-In Contacts Hand Tools Keying Plugs (Snap into housings) Material: Nyion, natural For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 # PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 Dimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. Chart contains dimensions in inches over millimeters. ar Contact Part No. Miniature Applicator for Wire Size Ins. Material Stock Finish ___ Applicator tor Stripper AWG/mm2 _siODiia.. Thickness Loose Strip AMP-O-LECTRIC = Crimper Piece Form Machine Machine 012 Bright Brass 03 Tin Plated 350011-1 61668-1 Phosphor 012 . Bronze 03 Pre-Tinned 350011-3 61668-2 Phosphor Ot2 Selective 24-18 100 Bronze 0.3 Gold Plated 990011-2 61668-4 020.9 254 Beryllium 012 Tin Plated 350011-4 61 *00868-2 486987" Copper 03 in Plate 668-5 Beryllium 010 Bright Copper 0.25 ~sTin Plated == ~=980194-11 Brass 32 Pre-Tinned + = 350194-21 30-24 .040-.057 .012 Bright 0.05-0.2 1.02-1.45 Brass 03 Tin Plated _ 640020-1 466407-2 466944-1 1Contacts with a stock thickness of .010 [0.25] are recommended for housings having 12 or more circuits. Note: Use Hand Tool Part No. 90123-2 for loose piece contacts. Use Extraction Tool Part No. 457241-1. Hand Crimping Tool Part No. 90123-2 Note: See page 7 for additional tooling. On-Contact Keying Plugs Part No. 640180-1 (Locks on ledge within housing) Extraction Tool Part No. 457241-1 -100 ~ [2.54] \ | { Lh) Circuit Plan Recommended PC Board LayoutBifurcated Leaf Connectors Keying Plugs (Snap into housings) Material: Nylon, natural AMP Double Circuit Locking Plug Part No. 350555-1 Dimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. Charts contain dimensions in inches over millimeters. PG Board Locking Plug Connector Housing Detail of Installed Locking Plug l LU B . +.000 /+0.00 (P38 Coto Coal " 160 [4.06] -156 Da + [ie tye. 2 Holes T] | ( \ fm Min i i A ; | : wa 525 | | 1334) (13.34) | | | | } Y. 234 312 975 Ba C 105 (7.92) (4.93) A 000.00, 2.67) 105 C010 ozs) [2.67] Circuit Path Width.090 Min. Recommended PC Board Layout Recommended PC Board Layout No. of Circuits Dimensions No. of Circuits Dimensions Total Active A B C Total Active A B Cc 1 3 1.092. ~+1.560 ~+1.895 7 5 "635 a79. 1.414 27.74 39.62 48.13 16.13 12.17 28.3 13 9 1248. ++41.716 ~ ~+2.052 3 6 635 635 ~*+1.270 31.7 43.89 52.12 16.13 1613 32.26 14 10 1404. 1.872 2.208 9 7 792 635. ~21.427 35.66 47.55 56.08 20.12 1613 36.25 16 "4 1560 2.028 2.364 40 8 792 791 1.583 39.62 51.51 60.05 2012 20.09 40.21 16 12 1716 2.184 2.520 1 9 948 791 1.739 43.59 55.47 64.01 24.08 20.09 44.47 1872. 2340 2.677 948 947. *+1.895 7 13 47.55 59.44 68 12 10 24.08 24.05 48.13 18 14 2.028 2.496 2.833 13 1" 1.105 0472.052 51.51 63.4 71.96 28.07 24.05 52.12 19 15 2.184. 2.652. 2.989 14 12 7105. +1.103.~-~2.208 55.47 67.36 ~75.92 28.07 28.02 ~=-56.08 2.340 2.808 3.145 1.261. 1.103. ~+2.364 20 16 59.44 71.32 79.88 15 13 32.03 28.02 60.05 2.496 2.964 3.302 1.261. 1.260. ~+2.520 a 7 63.4 7529 83.87 16 14 32.03 32 64.01 2.652 3.120. 3.458 1.417. 1.260. 2.677 22 18 67.36 79.25 87.83 7 15 35.99 32 68 2.808 3.276 3.614 1417. 1416 +2.833 23 19 7132 83.21 91.8 18 16 3599 3597 71.96 2.964. 3.432. 3.770 1573. +1416 ~+2.989 24 20 75.29 8717 95.76 19 7 39.95 35.97 75.92 1573. +41572..~3.145 20 18 30.95 39.93 79.88 Single Circuit Locking Plugs > 19 1.730 1.572 3.302 | 43.94 39.93 83.87 1.730. 1.728 3.458 Z| 22 20 43.94 43.89 87.83 1.886. ++41.728 3.614 23 aq 47.9 43.89 91.8 1.686. +1884. 3.770 24 22 47.9 47.85 95.76 Standard Plug Part No. 640179-1 (7 Plug with Release Part No. 350921-1 500 [12.7] ' ' ll +010 160 [4.06] Dia. | lL. 076 000 Located on Contact 150 win, 150 - [1.93 725) Centerline [3.81] [3.81] 0,00 Recommended PC Board Layout for Single Circuit Standard Locking Plug and Locking Plug with Release AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 # PRODUCT INFORMATION CENTER; PHONE; 1-800-522-6752Application Tooling AMP-O-MATIC Single End Lead Machine (SELM) The SELM is a conveyorized automatic terminating machine designed to adapt to an Artos CS6 cutting and stripping machine and is capable of terminating two leads on one end simultaneously. The SELM also offers maximum flexi- bility by use of existing AMP quick-change miniature applicators to run a wide range of terminals. Lead length changeover can be accomplished in a matter of seconds for even greater production flexibility. Miniature Stripper/Crimper Machine This machine automatically strips and terminates wire in a single operation. Itis a portable bench-mounted unit which can apply a wide range of open barrel, side feed strip contacts. Mini- mum lead length is only 1.5 [38] and production rates can be up to 1,200 terminations per hour. Quick-Change Miniature Applicators AMP miniature applicators provide flexible operation for the AMPOMATOR, AMP- O-LECTRIC and AMP-O- MATIC Single End Lead Machines. These applica- tors can be changed in minutes. Crimping height on both terminal barrel and insulation support for a given wire size is simply dialed in. All adjustments are made rapidly, with no major interruptions in pro- duction. Unique control circuits protect every machine part, and visual indicators aid in adjust- ment and operation. AMPOMATOR Automatic Lead Making Machine The AMPOMATOR machine is considered the epitome of all AMP automatic tooling. It not only crimps contacts to wire, but han- dies the wire every step of the wayfrom reel to finished lead. With the AMPOMATOR machine, you can produce up to 5,700 doubly termi- nated leads per hour 11,400 terminations in alldepending upan lead length and wire size. Lead and strip lengths are completely adjustable, as is operating speed. Quick-change miniature applicators with dial-type settings facilitate wire and contact change-over with no significant production downtime. Also, the machine is fully protected against malfunctional dam- age by fail-safe circuitry. Oimensioning: Dimensions are in inches and millimeters. Values in brackets are metric equivalents. AMP-O-LECTRIC Terminating Machine The AMP-O-LECTRIC machine is capable of applying contacts to wire at rates up to 1,500 per hour and more, depending on operator dexterity. The machine is electrically powered and bench mounted and can be readily moved to any location where an electrical power source is available. For high application rates, ease of maintenance and servicing, and for highest reliability at low applied cost, the AMP-O-LECTRIC machine nas proven itself to be an excellent addition to any circuit production operation. CERTI-CRIMP Hand Tools (See product section pages for appropriate part numbers) AMP hand tools are ideal for small production, proto- type and experimental applications. They feature the CERTI-CRIMP ratchet device which keeps the tool pressure locked until the jaws are brought together under the precise pressure needed to assure perfectly formed crimps, time after time. AMP INCORPORATED, HARRISBURG. PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 # PRODUCT INFORMATION CENTER, PHONE: 1-800-522-6752ANP THE WIDE WORLD OF AMP The Americas United States of America Worldwide Headquarters of AMP Incorporated Harrisburg, PA, U.S.A. Phone: 717-564-0100 FAX: 717-986-7813 Carroll Touch, Inc. Round Rock, TX, U.S.A. Phone: 512-244-3500 FAX: 512-244-7040 Australia Australian AMP Pty, Limited Castle Hill, NSW 2154 Phone: 61-2-680-3377 FAX: 61-2-634-6188 Hong Kong AMP Products Pacific Limited Kowloon, Hong Kong Phone: 852-735-1628 FAX: 852-735-0243 Japan AMP (Japan), Ltd. Kawasaki, Japan Phone: 044-844-8111 FAX: 044-812-3207 Austria AMP Osterreich G.m.b.H. Wien (Vienna), Austria Phone: 43-222-30-2600 FAX: 43-222-30-2661 Belgium Branch in Brussels of AMP Holland Zaventem (Brussels), Belgium Phone: 32-2-721-2020 FAX: 32-2-721-3263 Denmark AMP Danmark Viby, Denmark Phone: 45-86-295-055 FAX: 45-6-295-133 Finland AMP Finland OY Helsinki, Finland Phone; 358-0-556-533 FAX: 358-0-555-009 Matrix Science Corp. Torrance, CA, U.S.A. Phone: 310-328-0271 FAX: 310-783-6606 Argentina AMP S.A. Argentina Buenos Aires, Argentina Phone: 54-1-752-4612 FAX: 54-1-11-2837 Brazil AMP do Brasil Sao Paulo, Brazil Phone: 55-11-864-3311 FAX: 55-11-650-397 Asia/Pacific Carroll Touch International Japan Branch Tokyo 160, Japan Phone: 81-3-345-8231 Korea AMP Korea Ltd Seoul, South Korea Phone: 82-2-784-7171 FAX: 82-2-784-6059 Malaysia AMP Malaysia Kuala Lumpur, Malaysia Phone: 60-3-241-3016 FAX: 60-3-241-9612 France AMP de France Pontoise (Val-dOise), France Phone: 33-1-34-43-2720 FAX: 33-1-30-30-4550 Germany AMP Deutschland G.m.b.H. Langen, Germany Phone: 49-6103-7090 FAX: 49-6103-709223 Great Britain AMP of Great Britain Limited Stanmore (London), Middlesex, England Phone: 44-1-954-2356 FAX: 44-1-954-6234 Holland AMP-Holland B.V. 's-Hertogenbosch The Netherlands Phone: 31-73-20-0911 FAX: 31-73-21-2365 New Zealand New Zealand AMP Ltd. Auckland, New Zealand Phone: 64-9-634-580 FAX: 64-9-634-586 Shanghai AMP Products Pacific Ltd. Shanghai Representative Office Room 2208 Rui Jin Building 205 Mao Ming Road (South) Shanghai, China Phone: 011-86-21-471-7550 Europe lreland AMP Ireland Limited Dublin, treland Phone: 353-1-51-7333 FAX: 353-1-52-7685 Italy AMP Italia S.p.A. Collegno (Turin), Italy Phone: 39-11-7173-1 FAX: 39-11-773-1116 Norway AMP Norge A/S Rud (Osio), Norway Phone: 47-2-135-080 FAX: 47-2-136-998 Portugal AMP Portugal Lisbon, Portugal Phone: 351-19-901-543 FAX: 351-19-78451 Distributors, agents or direct representatives are located in over 30 other countries. AMP INCORPORATED, HARRISBURG, PA 17105; PHONE: 717-564-0100 TWX: 510-657-4110 PRODUCT INFORMATION CENTER; PHONE: 1-800-522-6752 654595M|IP11-92071 Printed in U.S.A. AMP manufacturing and/or direct marketing facilities are located in: Canada AMP of Canada, Ltd. Markham (Toronto) Ontario, Canada Phone: 416-475-6222 Mexico AMP de Mexico, S.A. Mexico City, Mexico Phone: 90-5-398-7611 FAX: 90-5-398-7964 Singapore AMP Singapore Pte. Ltd. Singapore Phone: 65-482-0311 FAX: 65-482-1012 Taiwan AMP Taiwan B.V. Taipei, Taiwan Republic of China Phone: 886-2-704-4815 FAX: 886-2-704-4940 Thailand AMP Thailand Bangkok, Thailand Phone: 662-541-10969 FAX: 662-541-1095 Spain AMP Espafola, S.A. Barcelona, Spain Phone: 34-3-200-8466 FAX: 34-3-201-7879 Sweden AMP Svenska AB Stockholm-Jakobsberg, Sweden Phone: 46-7-581-0400 FAX: 46-7-581-9470 Switzerland AMP (Schweiz) A.G. Steinach, Switzerland Phone: 41-7-147-0707 FAX: 41-7-147-0347 Printed on recycled paper.