2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
16 Super Capacitors Vol.07
FM Series for Automatic Assembly
The FM series includes small, resin-molded electric double-layer capacitors suitable for automatic assembly.
These capacitors are ideal as long-time backup devices for minute-current loads in VCRs, audio systems, cordless
telephones, and compact electronic systems. (FME types are backup devices adaptable to current consumption mA
level.)
Features
• High adaptability to automatic assembly
• Can be cleaned
• Excellent voltage holding characteristics ideal for long-time supply of 1
μ
A to several hundred
μ
A (Except 3.5 V type,
FME type)
• Space saving
Applications
Backup of CMOS microcomputers, static RAMs, and DTSs
Part Number System
FM 0H 473 Z F
Environmental Impact Reduced Product
Capacitance tolerance
Z: +80%, –20%
Nominal capacitance
First two digits represent significant figures.
Third digit specifies number of zeros to follow F code.
Maximum operating voltage
0H: 5.5 Vdc
0V: 3.5 Vdc
0J: 6.5 Vdc
Super Capacitor: FM series
FME type
FMR type
FMC type
FM0H223Z TP 16
Height of component from tape center.
16: 16 mm, 18: 18 mm
Tape packaging
Part number of bulk packaging
μ
• Bulk
• Tape (Ammo Pack)
Number of Packed Capacitors
Tape: 1000 pcs./box
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 17
Markings
+
-
5.5 V 473
N T
K1
E
Nominal capacitance
E:FME type Marking
R:FMR type Marking
Negative polarity identification
Date code
Polarity
Maximum
rated voltage
Dimensions
10.5 ±0.5
(0.413)
T±0.5
5±0.5
(0.197)
0.5±0.1
(0.020)
0.4±0.1
(0.016)
11.5±0.5
(0.453)
*5±1
(0.197)
Unit: mm
(inch)
0.4
(0.016)
*Bulk Type
Part Number
Ammo pack
FM0H103ZF FM0H103ZFTP ( )
FM0H223ZF FM0H223ZFTP ( )
FM0H473ZF FM0H473ZFTP ( )
FM0H104ZF FM0H104ZFTP ( )
FM0H224ZF FM0H224ZFTP ( )
Max.
Operating
Voltage
(VDC)
5.5
5.5
5.5
5.5
5.5
Nominal Capacitance
T
mm
(inch)
5.0
(0.197)
5.0
(0.197)
5.0
(0.197)
6.5
(0.256)
6.5
(0.256)
Voltage
Holding
Characteristic
Min. (V)
4.2
4.2
4.2
4.2
4.2
Max. Current
at 30
minutes
(mA)
0.015
0.033
0.071
0.15
0.33
Max. ESR
(at 1 kHz)
(Ω)
300
200
200
100
100
Weight
g
(oz)
1.3
(0.046)
1.3
(0.046)
1.3
(0.046)
1.6
(0.056)
1.6
(0.056)
Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
● 5.5 V Type
Charge System
( F )
0.01
0.022
0.047
0.10
–
Discharge System
( F )
0.014
0.028
0.06
0.13
0.22
Standard Rating
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
18 Super Capacitors Vol.07
Part Number
Ammo pack
FM0V473ZF FM0V473ZFTP ( )
FM0V104ZF FM0V104ZFTP ( )
FM0V224ZF FM0V224ZFTP ( )
Max.
Operating
Voltage
(VDC)
3.5
3.5
3.5
Charge System
(F)
0.047
0.10
0.22
T
mm
(inch)
5.0
(0.197)
5.0
(0.197)
6.5
(0.256)
Max. Current
at 30
minutes
(mA)
0.042
0.090
0.20
Max. ESR
(at 1 kHz)
(Ω)
200
100
100
Weight
g
(oz)
1.3
(0.046)
1.3
(0.046)
1.6
(0.056)
Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
● 3.5 V Type
Part Number
Ammo pack
FME0H223ZF FME0H223ZFTP ( )
FME0H473ZF FME0H473ZFTP ( )
Max.
Operating
Voltage
(VDC)
5.5
5.5
T
mm
(inch)
5.0
(0.197)
5.0
(0.197)
Max. Current
at 30
minutes
(mA)
0.033
0.071
Max. ESR
(at 1 kHz)
(Ω)
40
20
Weight
g
(oz)
1.3
(0.046)
1.3
(0.046)
Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
● FME Type ( Backup Large Current , mA Order )
Discharge System
(F)
0.06
0.13
0.30
Part Number
Ammo pack
FMR0H473ZF FMR0H473ZFTP ( )
Max.
Operating
Voltage
(VDC)
5.5
T
mm
(inch)
6.5
Max. Current
at 30
minutes
(mA)
0.071
Max. ESR
(at 1 kHz)
(Ω)
200
Weight
g
(oz)
1.6
Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
● FMR Type ( Max. Operating Temperature 85˚C type )
Voltage
Holding
Characteristic
Min.(V)
4.2
Part Number
Ammo pack
FM0J473ZF FM0J473ZFTP ( )
Max.
Operating
Voltage
(VDC)
6.5
T
mm
(inch)
6.5
Max. Current
at 30
minutes
(mA)
0.085
Max. ESR
(at 1 kHz)
(Ω)
200
Weight
g
(oz)
1.6
Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.)
● 6.5V Type
Nominal Capacitance
Charge System
(F)
0.022
0.047
Discharge System
(F)
0.028
0.06
Nominal Capacitance
Discharge System
(F)
0.062
Nominal Capacitance
Charge System
(F)
0.047
Discharge System
(F)
0.062
Nominal Capacitance
Charge System
(F)
0.047
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 19
Specifications: FM Series 5.5V Type
Specifications
–25°C to +70˚C
5.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of initial requirement
Current (30-minute value)
Not to exceed 120% of initial requirement
Appearance
No obvious abnormality.
Capacitance 50% or higher of initial value
Equivalent series resistance
4 or less times initial value
Capacitance 200% or below of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
3/4 or more of the pin surface should be covered with new solder
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance Within 20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current (30-minute value)
1.2 or less times initial standard value
Appearance
No obuious abnormality
Capacitance Within 30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current (30-minute value)
Twice or less times initial standard value
Appearance
No obvious abnormality
Voltage between terminal leads higher than 4.2 V
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
Surge Voltage
Phase 2
Phase 5
Phase 6
Lead Strengh (Tensile)
Vibration Resistance
Solderability
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Voltage Holding
Characteristics
(Self Discharge )
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge Voltage: 6.3 V
Temperature: 70 ±2˚C
Charge: 30 sec.
Discharge: 9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:
0.01F: 1500 Ω 0.22F: 56 Ω
0.022 F: 560 Ω
0.047 F: 300 Ω
0.10 F: 150 Ω
Discharge resistance: 0 Ω
Conforms to 7.12
Phase 1: +25 ±2°C
Phase 2: –25 ±2°C
Phase 4: +25 ±2°C
Phase 5: +70 ±2°C
Phase 6: +25 ±2°C
Conforms to 8.1.2 (1)
1 kg 10sec.
Conforms to 8.2.3
Frequency : 10 to 55 Hz
Test duration : 6 hours
Conforms to 9.5
Temperature: 40 ±2°C
Relative humidity: 90 to 95% RH
Test duration: 240 ±8 hours
Conforms to 9.10
Temperature: 70 ±2°C
Voltage applied: 5.5 Vdc
Series protection resistance: 0 Ω
Test duration: 1000 hours
Temperature
Variation of
Characteristics
+48
0
Voltage applied: 5.0 VDC
Series resistance:
0 Ω
Charging time: 24hours
Time: 24hours
Temperature:
Lower than 25
°C
Humidity
:
Lower than 70%RH
Charging
condition
Storage
Conforms to 9.3
Temperature condition:
–25°C → normal temperature
→ +70°C → normal temperature
Number of cycles: 5 cycles
Conforms to 8.4
Solder temperature: 245 ±5°C
Dipping duration: 5 ±0.5 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 8.5
Solder temperature: 260 ±10°C
Dipping duration: 10 ±1 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
20 Super Capacitors Vol.07
Specifications: FM Series 3.5V Type
Specifications
–25°C to +70˚C
3.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of initial requirement
Current (30-minute value)
Not to exceed 120% of initial requirement
Appearance
No obvious abnormality
Capacitance 50% or higher of initial value
Equivalent series resistance
4 or less times initial value
Capacitance 200% or below of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No considerable abnormality
3/4 or more of the pin surface should be covered with new solder
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance Within ±20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current (30-minute value)
1.2 or less times initial standard value
Appearance
No obvious abnormality
Capacitance Within 30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current (30-minute value)
Twice or less times initial standard value
Appearance
No obvious abnormality
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
Surge Voltage
Phase 2
Phase 5
Phase 6
Lead Strengh (Tensile)
Vibration Resistance
Solderability
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage: 4.0 V
Temperature: 70 ±2°C
Charge: 30 sec.
Discharge: 9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:
0.047 F: 300 Ω
0.10 F: 150 Ω
0.22 F: 56 Ω
Discharge resistance: 0 Ω
Conforms to 7.12
Phase 1: +25 ±2°C
Phase 2: –25 ±2°C
Phase 4: +25 ±2°C
Phase 5: +70 ±2°C
Phase 6: +25 ±2°C
Conforms to 8.1.2 (1)
1 kg 10 sec
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
+48
0
Temperature
Variation of
Characteristics
Conforms to 9.10
Temperature: 70 ±2°C
Voltage applied: 3.5 Vdc
Series protection resistance: 0 Ω
Test duration: 1000 hours
Conforms to 8.5
Solder temperature: 260 ±10°C
Dipping duration: 10 ±1 sec.
Dipped up to 1.6 mm from for the lower
end of the capacitor.
Conforms to 9.3
Temperature condition:
–25°C → normal temperature
→ +70°C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40 ±2°C
Relative humidity: 90 to 95% RH
Test duration: 240 ±8 hours
Conforms to 8.4
Solder temperature: 245 ±5°C
Dipping duration: 5 ±0.5 sec.
Dipped up to 1.6 mm from for the lower
end of the capacitor.
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 21
Specifications: FM Series FME Type
Specifications
–25°C to +70˚C
5.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of initial requirement
Current (30-minute value)
Not to exceed 120% of initial requirement
Appearance
No obvious abnormality
Capacitance 50% or higher of initial value
Equivalent series resistance
3 or less times initial value
Capacitance 150% or below of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
There should be no considerable abnormality
3/4 or more of the pin surface should be covered with new solder
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance Within ±20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current (30-minute value)
1.2 or less times initial standard value
Appearance
No obvious abnormality
Capacitance Within 30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current (30-minute value)
Twice or less times initial standard value
Appearance
No obvious abnormality
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
Surge Voltage
Phase 2
Phase 5
Phase 6
Lead Strengh (Tensile)
Vibration Resistance
Solderability
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Test Conditions
Conforming JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.12
Phase 1: +25 ±2°C
Phase 2: –25 ±2°C
Phase 4: +25 ±2°C
Phase 5: +70 ±2°C
Phase 6: +25 ±2°C
Conforms to 8.1.2 (1)
1 kg 10 sec
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245 ± 5°C
Dipping duration: 5 ± 0.5 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 8.5
Solder temperature: 260 ±10°C
Dipping duration: 10 ±1 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 9.3
Temperature condition:
–25°C → normal temperature
→ +70°C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40 ± 2°C
Relative humidity: 90 to 95% RH
Test duration: 240 ± 8 hours
Conforms to 9.10
Temperature: 70 ± 2°C
Voltage applied: 5.5 Vdc
Series protection resistance: 0 Ω
Test duration: 1000 hours
+48
0
Temperature
Variation of
Characteristics
Conforms to 7.14
Surge Voltage: 7.4 V
Temperature: 70 ±2°C
Chargs: 30 sec.
Dischargs: 9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:
0.022 F: 560 Ω
0.047 F: 300 Ω
Discharge resistance: 0 Ω
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
22 Super Capacitors Vol.07
Specifications
–40°C to +85˚C
5.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of initial requirement
Current (30-minute value)
Not to exceed 120% of initial requirement
Appearance
No obvious abnormality
Capacitance 50% or higher initial value
Equivalent series resistance
4 or less times initial value
Capacitance 30% or higher initial value
Equivalent series resistance
7 or less times initial value
Capacitance 200% or below initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
3/4 or more of the pin surface should be covered with new solder.
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance Within 20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current (30-minute value)
1.2 or less times initial standard value
Appearance
No obuious abnormality
Capacitance Within 30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current (30-minute value)
Twice or less times initial standard value
Appearance
No obvious abnormality
Voltage between terminal leads higher than 4.2 V
Specifications: FM Series FMR Type
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
Surge Voltage
Phase 2
Phase 3
Phase 5
Phase 6
Lead Strengh (Tensile)
Vibration Resistance
Solderability
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Voltage Holding
Characteristics
(Self Discharge )
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge Voltage: 6.3 V
Temperature: 85 ±2˚C
Charge: 30 sec.
Discharge: 9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:300 Ω
Discharge resistance: 0 Ω
Conforms to 7.12
Phase 1: +25 ±2°C
Phase 2: –25 ±2°C
Phase 3: –40 ±2°C
Phase 4: +25 ±2°C
Phase 5: +85 ±2°C
Phase 6: +25 ±2°C
Conforms to 8.1.2 (1)
1 kg 10sec.
Conforms to 8.2.3
Frequency : 10 to 55 Hz
Test duration : 6 hours
Conforms to 8.4
Solder temperature: 245 ±5°C
Dipping duration: 5 ±0.5 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 8.5
Solder temperature: 260 ±10°C
Dipping duration: 10 ±1 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 9.3
Temperature condition:
–40°C → normal temperature
→ +85°C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40 ±2°C
Relative humidity: 90 to 95% RH
Test duration: 240 ±8 hours
Conforms to 9.10
Temperature: 85 ±2°C
Voltage applied: 5.5 Vdc
Series protection resistance: 0 Ω
Test duration: 1000 hours
Temperature
Variation of
Characteristics
+48
0
Voltage applied: 5.0 VDC
Series resistance:
0 Ω
Charging time: 24hours
Time: 24hours
Temperature:
Lower than 25
°C
Humidity
:
Lower than 70%RH
Charging
condition
Storage
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 23
Specifications: FM Series 6.5V Type
Specifications
–25°C to +70˚C
6.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of initial requirement
Current (30-minute value)
Not to exceed 120% of initial requirement
Appearance
No obvious abnormality
Capacitance 50% or higher of initial value
Equivalent series resistance
4 or less times initial value
Capacitance 200% or below of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
3/4 or more of the pin surface should be covered with new solder
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance Within 20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current (30-minute value)
1.2 or less times initial standard value
Appearance
No obuious abnormality
Capacitance Within 30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current (30-minute value)
Twice or less times initial standard value
Appearance
No obvious abnormality
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
Surge Voltage
Phase 2
Phase 5
Phase 6
Lead Strengh (Tensile)
Vibration Resistance
Solderability
Soidering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge Voltage: 7.4 V
Temperature: 70 ±2˚C
Charge: 30 sec.
Discharge: 9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:
0.047 F: 300 Ω
Discharge resistance: 0 Ω
Conforms to 7.12
Phase 1: +25 ±2°C
Phase 2: –25 ±2°C
Phase 4: +25 ±2°C
Phase 5: +70 ±2°C
Phase 6: +25 ±2°C
Conforms to 8.1.2 (1)
1 kg 10sec.
Conforms to 8.2.3
Frequency : 10 to 55 Hz
Test duration : 6 hours
Conforms to 8.4
Solder temperature: 245 ±5°C
Dipping duration: 5 ±0.5 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 8.5
Solder temperature: 260 ±10°C
Dipping duration: 10 ±1 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 9.3
Temperature condition:
–25°C → normal temperature
→ +70°C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40 ±2°C
Relative humidity: 90 to 95% RH
Test duration: 240 ±8 hours
Conforms to 9.10
Temperature: 70 ±2°C
Voltage applied: 6.5 Vdc
Series protection resistance: 0 Ω
Test duration: 1000 hours
+48
0
Temperature
Variation of
Characteristics
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
24 Super Capacitors Vol.07
Markings
+
-
5.5 V 473
N T
K1
C
Nominal capacitance
C:FMC type Marking
Negative polarity identification
Date code
Polarity
Maximum
rated voltage
Dimensions
b ±0.5 T ±0.5
5±0.5
d1 ±0.1 d2 ±0.1
a ±0.5
*5±1
*Bulk Type
Unit: mm
0.4
● FMC Type
Tab d
1
d
2
FMC0H473ZF
FMC0H104ZF
FMC0H334ZF
FMC0H473ZFTP( )
FMC0H104ZFTP( )
FMC0H334ZFTP( )
5.5
5.5
5.5
0.047
0.10
–
0.062
0.13
0.33
100
50
25
0.071
0.15
0.50
4.2V
4.2V
4.2V
11.5
11.5
15.0
10.5
10.5
14.0
5.0
6.5
9.0
0.5
0.5
0.6
0.4
0.4
0.6
1.3
1.6
3.5
(mm) (mm) (mm) (mm) (mm)
Part Number
Ammo pack
Max.
Operating
Voltage
(VDC)
Nominal Capacitance
Charge System
( F )
Discharge System
( F )
Max. ESR
(at 1 kHz)
( Ω )
Max. Current
at 30
minutes
( mA )
Voltage
Holding
Characteristic
Min. ( V ) ( g )
Weight
more than
more than
more than
less than
less than
less than
less than
less than
less than
Chip parts applicable to treatment in bond hardening furnace (160 ± 5°C for 120 ±10 seconds)
Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26 or 27.)
Standard Ratings
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 25
Specifications: FM Series FMC Type
Specifications
–25°C to +70˚C
5.5 VDC
Refer to standard ratings
+80%, –20%
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of initial requirement
Current (30-minute value)
Not to exceed 120% of initial requirement
Appearance
No obvious abnormality.
Capacitance 50% or higher of initial value
Equivalent series resistance
4 or less times initial value
Capacitance 200% or below of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
There should be no considerable abnormality
3/4 or more of the pin surface should be covered with new solder
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current (30-minute value)
Appearance
No obvious abnormality
Capacitance Within ±20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current (30-minute value)
1.2 or less times initial standard value
Appearance
No obvious abnormality
Capacitance Within 30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current (30-minute value)
Twice or less times initial standard value
Appearance
No obvious abnormality
Voltage between terminal leads higher then 4.2V
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minutes value)
Surge Voltage
Phase 2
Phase 5
Phase 6
Lead Strengh (Tenile)
Vibration Resistance
Solderability
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Voltage Holding
Characteristics
(Self Dischage)
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge Voltage: 6.3 V
Temperature: 70 ±2°C
Chargs: 30 sec.
Dischargs: 9 min. 30 sec.
Number of cycles 1000 cycles.
Series resistance:
0.047 F: 300 Ω
0.1 F: 150 Ω
0.33 F: 51 Ω
Discharge resistance: 0 Ω
Conforms to 7.12
Phase 1: +25 ±2°C
Phase 2: –25 ±2°C
Phase 4: +25 ±2°C
Phase 5: +70 ±2°C
Phase 6: +25 ±2°C
Conforms to 8.1.2 (1)
1 kg 10 sec
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245 ± 5°C
Dipping duration: 5 ± 0.5 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 8.5
Solder temperature: 260 ±10°C
Dipping duration: 10 ±1 sec.
Dipped up to 1.6 mm from the lower end
of the capacitor.
Conforms to 9.3
Temperature condition:
–25°C → normal temperature
→ +70°C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40 ± 2°C
Relative humidity: 90 to 95% RH
Test duration: 240 ± 8 hours
Conforms to 9.10
Temperature: 70 ± 2°C
Voltage applied: 5.5 Vdc
Series protection resistance: 0 Ω
Test duration: 1000 hours
+48
0
Temperature
Variation of
Characteristics
Voltage applied: 5.0 VDC
Series resistance:
0 Ω
Charging time: 24hours
Charging
condition
Storage
Time: 24hours
Temperature:
Lower than 25
°C
Humidity
:
Lower than 70%RH
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
26 Super Capacitors Vol.07
Item Symbol Value Tolerance Remarks
Component Height a 11.5 ±0.5
Component Width b 10.5 ±0.5
5.5 V Type: 5.0/0.010 F~0.047 F, 6.5/0.047 F
3.5 V Type: 5.0/0.047 F~0.10 F, 6.5/0.22 F
Component Thickness C – ±0.5
FME Type: 5.0/0.022 F~0.047 F
6.5 Type: 6.5/0.047 F
FMR Type: 6.5/0.047 F
FMC Type: 5.0/0.047 F, 6.5/0.10 F
Lead-wire Width W40.5 ±0.1
Lead-wire Thicknesst3t30.4 ±0.1
Pitch of Component P 12.7 ±1.0
Sprocket Pitch P012.7 ±0.3
Sprocket Hole Center to Lead P13.85 ±0.7
Sprocket Hole to Component Center P26.35 ±1.3
Lead Spacing F 5.0 ±0.5
Component Alignment h 2.0 Max. –
Including tiltiing caused by bending of lead wire
Tape Width W 18.0
Hold-down tape Width W012.5 Min. –
Sprocket Hole Position W19.0 ±0.5
Hold-down Tape Position W23.0 Max. – No protrusion of tape
Height of Component from Tape Center H 16.0 ±0.5
18.0 ±0.5
Sprocket Hole Diameter D0
φ
4.0 ±0.2
t10.7 ±0.2
t21.5 Max. –
Length of Shipped Lead L 11.0 Max. –
Unit : mm
Total Tape Thickness
+1.0
–0.5
Δ
Taping Specification
+–+–
P2
b
P1FW4
P0D0
c
t3
t2
t1
h
Δ
P
W1
W0
W
H
L
a
W2
Packing Quantity
1000 pcs. / box
(except FMC0H334ZFTP( ))
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 27
Item Symbol Value Tolerance Remarks
Component Height a 15.0 ±0.5
Component Width b 14.0 ±0.5
Component Thickness c 9.0 ±0.5
Lead-wire Width W40.6 ±0.1
Lead-wire Thickness t30.6 ±0.1
Pitch of Component P 25.4 ±1.0
Sprocket Pitch P012.7 ±0.3
Sprocket Hole Center to Lead P13.85 ±0.7
Sprocket Hole to Component Center P26.35 ±1.3
Lead Spacing F 5.0 ±0.5
Component Alignment h 2.0 Max. –
Including tiltiing caused by bending of lead wire
Tape Width W 18.0
Hold-down tape Width W012.5 Min. –
Sprocket Hole Position W19.0 ±0.5
Hold-down Tape Position W23.0 Max. – No protrusion of tape
Height of Component from Tape Center H 16.0 ±0.5
18.0 ±0.5
Sprocket Hole Diameter D0
φ
4.0 ±0.2
Total tape thickness t10.67 ±0.2
t21.7 Max. –
Length of Shipped Lead L 11.0 Max. –
Unit : mm
+1.0
–0.5
Δ
Taping Specifications [FMC0H334ZFTP( )]
Packing Quantity
400 pcs. / box