2N3846, 2N3847 JAN SERIES
ELECTRICAL CHARACTERISTICS (con’t)
Characteristics Symbol Min. Max. Unit
ON CHARACTERISTICS (3)
Forward-Current Transfer Ratio
IC = 1 Adc; VCE = 3.0 Vdc
IC = 5 Adc; VCE = 3.0 Vdc
IC = 10 Adc; VCE = 3.0 Vdc
hFE 70
40
12
240
60
Base-Emitter Sustaining Voltage
VCE = 3 Vdc; IC = 10 Adc VBE 1.20 Vdc
Base-Emitter Saturated Voltage
IB = 1.6 Adc; IC = 10 Adc VBE(sat) 1.30 Vdc
Collector-Emitter Saturated Voltage
IB = 1.6 Adc; IC = 10 Adc VCE(sat) 0.75 Vdc
DYNAMIC CHARACTERISTICS
Magnitude of Common-Emitter Small-Signal Short-Circuit
Forward Current Transfer Ratio
IC = 1.0 Adc, VCE = 10 Vdc, f = 1 MHz hfe 10 35
Small-Signal Short-Circuit Forward Current Transfer Ratio
IC = 5 Adc, VCE = 10 Vdc, f = 1 kHz hfe 50 250
Output Capacitance
VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz Cobo 750 pF
SWITCHING CHARACTERISTICS
Turn-On Time
VBE(off) ~ -7.5 Vdc; IC = 10 Adc;
IB1 = 2 Adc; IB2 = -2 Adc; RL = 15Ω
ton 4 µs
Turn-Off Time
VBE(off) ~ -7.5 Vdc; IC = 10 Adc;
IB1 = 2 Adc; IB2 = 2 Adc; RL = 15Ω
toff 7 µs
SAFE OPERATING AREA
DC Tests
TC = +1000C; VCE = 0 Vdc, IC = 0 Adc (See Figure 3 on Mil-PRF-19500/412)
Test 1
VCE = 7.5 Vdc; IC = 20 Adc; tp = 1.0 s; 1 cycle
Test 2
VCE = 200 Vdc; IC = 100 mAdc; tp = 1.0 s, 1 cycle
Test 3
VCE = 58 Vdc; IC = 1.0 Adc; tp = 1.0 s, 1 cycle
Burnout by Pulsing (2N3847 only)
TC = +1000C; VCE = 300 Vdc; IC = 20 mAdc; tp = 1.0 s, 1 cycle
Unclamped Inductive Sweep
TC = +1000C; IC = 20 Adc; IB = 2 Adc (See Figure 4 on Mil-PRF-19500/412)
Clamped Inductive Sweep
TC = +1000C; IC = 20 Adc; IB = 2 Adc (See Figure 5 on Mil-PRF-19500/412)
3) Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%.
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803
Page 2 of 2