Low Profile Power Inductors Pb SD3118 Series Applications * Cellular phones, Digital cameras, CD players, PDAs * * * * * Small LCD displays LED driver and LED flash circuits Hard disk drives Backlighting EL panel Environmental Data * Storage temperature range: -40C to +125C * Operating temperature range: -40C to +125C (with derated current) * Solder reflow temperature: +260C max. for 10 seconds maximum SMD Device Description * * * * * * * Packaging 125C maximum total temperature operation 3.2mm x 3.2mm x 1.8mm maximum shielded drum core Ferrite core material Inductance range from 1.0H to 1000H Current range from 2.94 Amps to 0.083 Amps Frequency range up to 4MHz RoHS compliant * Supplied in tape and reel packaging, 4100 per reel, 13" diameter reel Product Specifications Part 5 Number SD3118-1R0-R SD3118-1R5-R SD3118-2R2-R SD3118-3R3-R SD3118-4R7-R SD3118-6R8-R SD3118-8R2-R SD3118-100-R SD3118-150-R SD3118-220-R SD3118-330-R SD3118-470-R SD3118-221-R SD3118-331-R SD3118-471-R SD3118-681-R SD3118-102-R Rated OCL1 Part Marking Irms2 Inductance (H) 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10.0 15.0 22.0 33.0 47.0 220.0 330.0 470.0 680.0 1000.0 (H) 1.0430% 1.4430% 2.1230% 3.3630% 4.9030% 6.7230% 8.1030% 10.430% 14.920% 22.520% 33.120% 47.520% 221.920% 329.920% 470.120% 680.320% 999.420% Designator A B C D E F G H I J K L M N O P Q (Amps) 2.01 1.81 1.50 1.22 1.02 0.85 0.81 0.75 0.62 0.50 0.41 0.370 0.182 0.146 0.131 0.107 0.087 1 Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.10Vrms, 0.0Adc 2 Irms: DC current for an approximate temperature rise of 40C without core loss. Derating is necessary for AC currents. PCB pad layout, trace thickness and width, air-flow and proximity of other heat generating components will affect the temperature rise. It is recommended the part temperature not exceed 125C under worst case operating conditions verified in the end application. 3 Isat: Peak current for approximately 30% rolloff at +20C. 1109 BU-SB091064 Isat3 (Amps) 3.07 2.42 2.00 1.59 1.31 1.12 1.02 0.90 0.75 0.61 0.51 0.42 0.177 0.145 0.122 0.101 0.083 DCR () @ 20C (Typical) 0.041 0.051 0.074 0.113 0.162 0.232 0.257 0.295 0.440 0.676 0.986 1.21 4.77 7.40 9.20 13.70 20.90 K-factor4 84 68 57 56 39 32 29 26 21 18 14 12 6 5 4 3 3 4 K-factor: Used to determine Bp-p for core loss (see graph). Bp-p = K * L * I. Bp-p (mT), K: (K-factor from table), L: (inductance in H), I (peak-to-peak ripple current in amps). 5 Part Number Definition: SD3118-xxx-R * SD3118 = Product code and size * xxx= Inductance value in H, R = decimal point. If no "R" is present then third character =# of zeros * -R suffix = RoHS compliant Page 1 of 3 Data Sheet: 4084 Dimensions - mm BOTTOM VIEW TOP VIEW RECOMMENDED PCB LAYOUT 2.40 Pin #1 indicator 3.2 max. 1.40 Marking 3.9 max XX X 0.70 3.2 max. 1.5 typical SCHEMATIC 1 SIDE VIEW 1.8 max 2 3 Digit Part Marking: (1st digit: Indicates inductance value per letter in Part Marking Designator); (2nd digit: Bi-weekly production date code); (3rd digit: Last digit of the year produced). Packaging Information - mm 4.00 1.2 Dia min. 1.5 Dia. +0.1/-0.0 2.00 1.75 A Ao = 4.0mm A1 = 0.93mm Bo = 4.20mm B1 = 1.25mm Ko = 2.00mm 1 B1 10.25 Bo 12.0 +/-0.3 5.50 2 3.4 Ko 3.4 A A1 SECTION A-A Ao 8.0 Direction of feed Supplied in tape-and-reel packaging, 4100 parts per reel, 13" diameter reel. Temp.Ris e(C) Temperature Rise vs. Total Loss 90 80 70 60 50 40 30 20 10 0 0 0.05 0.1 0.15 0. 2 0.25 0.3 0. 35 Total Lo ss(W) 1109 BU-SB091064 Page 2 of 3 Data Sheet: 4084 0.4 0.45 Core Loss 10 1MHz 1 500kHz 300kHz 200kHz Core Loss (W) 0.1 100kHz 50kHz 0.01 0.001 0.0001 0.00001 1 10 100 1000 Bp-p (mT) Inductance Characteristics OCL vs. Isat 120% 110% 100% % of L initial 90% 80% 70% 60% -40C 50% 40% 25C 30% 85C 20% 10% 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 120% 130% 140% % o f I sat North America Cooper Electronic Technologies 1225 Broken Sound Parkway NW Suite F Boca Raton, FL 33487-3533 Tel: 1-561-998-4100 Fax: 1-561-241-6640 Toll Free: 1-888-414-2645 Cooper Bussmann P.O. Box 14460 St. Louis, MO 63178-4460 Tel: 1-636-394-2877 Fax: 1-636-527-1607 Europe Cooper Electronic Technologies Cooper (UK) Limited Burton-on-the-Wolds Leicestershire * LE12 5TH UK Tel: +44 (0) 1509 882 737 Fax: +44 (0) 1509 882 786 Cooper Electronic Technologies Avda. Santa Eulalia, 290 08223 Terrassa, (Barcelona), Spain Tel: +34 937 362 812 +34 937 362 813 Fax: +34 937 362 719 Asia Pacific Cooper Electronic Technologies 1 Jalan Kilang Timor #06-01 Pacific Tech Centre Singapore 159303 Tel: +65 278 6151 Fax: +65 270 4160 The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. (c) 2009 Cooper Bussmann S t . L o u i s, M O 6 3 1 7 8 w w w. c o o p e r bu s s m a n n . c o m 1109 BU-SB091064 Page 3 of 3 Data Sheet: 4084