Model :
T
yp
e: QT10
Cr
y
stal Oscillator
E
q
uivalent Militar
y
Desi
g
nation:
M55310/08=QT10T, /11=QT10C, /15=QT10C
Fre
q
uenc
y
Stabilit
y
vs Tem
p
erature
Screened
Output Logic
Fre
q
uenc
y
O
p
tions
TTL
CMOS **
HCMOS/ACMOS
ECL/PECL
0.01 Hz to 160 MHz
0.01 Hz to 15 MHz (5 to 15 V)
0.01 Hz to 160 MHz
1 MHz to 200 MHz
** Indicate supply voltage : QT10C9M-10.000 MHz, 15
V
Pin Confi
g
uration
Code ± % ± PPM Temp
1.01 100 0°C to +70°C
4.005 50 0°C to +70°C
3** .0005 50°C to +50°C
5.0025 25 -20°C to +70°C
6.005 50 -55°C to +105°C
9.005 50 -55°C to +125°C
10 .01 100 -55°C to +125°C
11 .005 50 -40°C to +85°C
12 .01 100 -40°C to +85°C
** Requires external tuning capacitors. Consult the factory for pin
connections. For frequencies above 30 Mhz, consult the factory.
For frequency stability vs. temperature options not listed herein, request a
custom part number.
VCC GND OUT CASE ITP
14 8 1 2 3, 12
Pa
e 1 of 3Standar
d
07-Ma
r
-2007mhtml:file://Y:\CPL\03062007\QTEC\QT10.mht
Screened
Phase Noise
Factor
y
Options
Output
Logic
* Output logic can drive up to 200 pF load with typical
6
ns rise & fall time (tr, tf).
T
C
HC
AC
L
E
EH
EF
PE
Z
TTL
CMOS
High Speed CMOS
A
dvanced CMOS
Low Voltage, 3.3 V
10 K ECL
10 KH ECL
100 K/300 K ECL
+5 V ECL (PECL)
Special CMOS*
D = Tristate Output
(add "D" as a suffix to the above listed options)
Electrical S
p
ecifications
ITEM TTL CMOS HC/ACMOS*** ECL
SUPPLY
VOLTAGE 5 V ± 10% 5.0 TO 15.0 V 5 V ± 10%** -5.2 V std. fo r 10 K/10 KH output
-4.5 V std. for 100 K/300 K output
SUPPLY
CURRENT
(Typical)
66 to 160 MHz: 80 mA
50 to 66 MHz: 40 mA
27 to 50 MHz: 25 mA
6.5 to 27 MHz: 12 mA
.01Hz to 6.5 MHz: 20 mA
2 to 4 mA @ 5 V and 6 MHz
Special supply voltage or
current available.
Ultra low current for battery
operation also available.
HC = 6 mA @ 10 MHz
AC = 20 mA @ 35 MHz
Special supply voltage or current
available.
Ultra low current for battery
operation also available.
35 mA (typ) for 10 K
LOAD 30 to 72 MHz: 6 TTL
< 30 MHz: 10 TTL Typical 10 k ohm shunted with
15 pf. capacitor Typical ± 2 mA drive.
Can drive 1 TTL load. Standard ECL, designed for 20
ECL Loads.
SYMMETRY* ≥ 8 MHz: 60/40%
< 8 MHz: 45/55% 4 to 15 MHz: 60/40%
< 4 MHz: 45/55% ≥ 10 MHz: 60/40%
< 10 MHz: 45/55% 60/40%
* Optional symmetry selections are 45/55 or 47.5/52.5 Custom symmetry is also available upon request.
** Parts are available with supply range of 2.5 to 6 Volts.
*** Low voltage logic avaliable, Vcc = 3.3 V ± 10%, Current = 12 mA @ 40 MHz, Drive capability = 15 pf
Pa
e 2 of 3Standar
d
07-Ma
r
-2007mhtml:file://Y:\CPL\03062007\QTEC\QT10.mht
Pa
e 3 of 3Standar
d
07-Ma
r
-2007mhtml:file://Y:\CPL\03062007\QTEC\QT10.mht