9 ANTI-ROTATIONAL SET SCREW TINEL LOCK RING 3 CODE 18 - TINEL-LOCK BACKSHELL TXR18AB00 -1608AISERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE MANUFACTURER CODE SEE TABLE 3 DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR18AB00-1406). RING SHALL BEAR NO MARKING. 5. IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-DTL-5015D, CLASS A, E & R, MS3100, MS3101 & MS3106. RESILIENT INSERT, SOLDER TYPE & BENDIX 10-214, CANNON CA-RX COMMERCIAL CRIMP TYPE. 7. ADDITIONAL PIECE(S) SUPPLIED WHEN CONNECTOR MANUFACTURER IS UNKNOWN ("D" IN TABLE 1). 8. ALL THREADS SIZES FOR ORDER NO. APPLY 9. ANTI-ROTATIONAL SET SCREW, THREE THREADED HOLES 120 5 APART, SINGLE MATING SET SCREW SUPPLIED: AN565DC4H2, NOT REQUIRED FOR TYPE 2 ADAPTERS. If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 18/12/2014 CHECKED 18/12/2014 APPROVED K.SHEPPARD 19/12/2014 APPROVED H.SMITH 07/07/2015 REVISIONS LTR DESCRIPTION J REVISED PER ECO-15-002435 K REVISED PER ECO-15-009990 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE 18/02/2015 APPROVED H.SMITH 07/07/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-5015D TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR18 K 1 IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 If this document is printed it becomes uncontrolled. Check for the latest revision PART MARK HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 26,50 XXXX OB A THREAD OY OZ XXXX OS OK A THREAD OB 19,50 0,50 27,00 SILICONE O-RING 5 STRAIGHT BACKSHELL - TYPE 2 C 19,50 0,50 F D G 45 BACKSHELL - TYPE 2 45 BACKSHELL - TYPE 1 W H 19,50 0,50 T J E M 90 BACKSHELL - TYPE 1 90 BACKSHELL - TYPE 2 W H 19,50 0,50 M J E T 90 BACKSHELL - TYPE 1 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE DATE DRAWN K.WINCZURA 18/12/2014 CHECKED 18/12/2014 APPROVED K.SHEPPARD 19/12/2014 APPROVED H.SMITH 07/07/2015 REVISIONS LTR DESCRIPTION J REVISED PER ECO-15-002435 K REVISED PER ECO-15-009990 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE 18/02/2015 APPROVED H.SMITH 07/07/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 90 BACKSHELL - TYPE 2 STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-5015D TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR18 K 2 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 1 ORDER NUMBER SHELL SIZE 8S 8S 8S 8S 10S 10SL 10SL 10SL 12 & 12S 12 & 12S 12 & 12S 14 & 14S 16 & 16S 18 20 20 20 22 24 28 32 32 32 36 36 36 36 36 40 40 40 44 48 48 48 08 10 11 12 14 16 18 20 22 24 28 32 36 40 44 48 MFR CODE TABLE 3 B C A, R D 8 C A, B, R D 8 B, C A, R D 8 A, B, C R D 8 B, C A, R D 8 B R C A D 8 B A, C, R D 8 C A, R D 8 MAX ENTRY A THREAD OB MAX C 0,5 D 0,5 W 0,5 T 0,5 E 0,5 W 0,5 T 0,5 E 0,5 04 04 04 04 06 07 07 07 08 08 08 10 12 12 16 16 16 18 20 22 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 3/8-32 UNEF 7/16-28 UNEF 7/16-27 UNS 7 1/2-28 UNEF 9/16-24 UNEF 5/8-24 UNEF 7 5/8-24 UNEF 11/16-24 UNEF 7 3/4-20UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-18 UNEF 1 1/8-24 UNS 7 1 1/4-18 UNEF 1 3/8-18 UNEF 1 5/8-18 UNEF 1 7/8-16 UN 1 29/32-18 UN 7 2 1/16-16 UNS 2 1/16-20 UNS 2 1/8-16 UN 2 1/8-18 UNS 7 2 5/16-16 UN 2 3/8-16UN 7 2 5/8-16 UN 2 13/16-18 UNS 2 7/8-16 UN 7 18,5 18,1 18,5 18,5 19,8 21,6 23,2 23,2 23,0 24,9 24,9 27,7 31,1 34,4 37,6 37,6 37,6 40,6 43,6 48,6 54,9 54,9 54,9 64,6 64,6 64,6 64,6 64,6 70,6 70,6 69,3 82,0 82,0 82,0 82,0 15,0 15,0 15,0 15,0 15,4 18,4 18,4 18,4 18,4 18,4 18,4 19,3 20,0 20,6 21,3 21,3 21,3 21,9 22,5 23,6 24,9 24,9 24,9 27,5 27,5 27,5 27,5 27,5 30,1 30,1 30,1 30,1 31,3 31,3 31,3 20,1 20,1 20,1 20,1 21,6 21,6 21,6 21,6 21,6 21,6 21,6 22,2 23,6 23,7 24,6 24,6 24,6 25,0 25,4 25,4 27,5 27,5 27,5 29,0 29,0 29,0 29,0 29,0 30,1 30,1 30,1 30,1 38,5 38,5 38,5 21,7 21,7 21,7 21,7 23,2 25,0 27,2 27,2 27,2 27,2 27,2 30,7 34,2 37,2 40,7 40,7 40,7 43,7 46,7 51,7 58,4 58,4 58,4 67,7 67,7 67,7 67,7 67,7 72,2 72,2 72,2 77,6 MAX 84,0 MAX 84,0 MAX 84,0 MAX 15,2 15,2 15,2 15,2 15,7 16,5 17,5 17,5 17,5 17,5 17,5 19,5 21,5 23,0 24,5 24,5 24,5 26,0 27,5 30,0 32,7 32,7 32,7 38,0 38,0 38,0 38,0 38,0 41,1 41,1 41,1 41,1 44,1 47,2 47,2 26,0 26,0 26,0 26,0 27,7 27,7 27,7 27,7 27,7 27,7 27,7 30,7 32,4 34,0 35,6 35,6 35,6 37,1 38,6 41,1 44,5 44,5 44,5 49,1 49,1 49,1 49,1 49,1 51,3 51,3 51,3 51,3 57,5 57,5 57,5 21,7 21,7 21,7 21,7 23,2 27,2 27,2 27,2 27,2 27,2 27,2 30,7 34,2 37,2 40,7 40,7 40,7 43,7 46,7 51,7 58,4 58,4 58,4 67,7 67,7 67,7 67,7 67,7 72,2 72,2 72,2 72,2 75,5 75,5 75,5 15,2 15,2 15,2 15,2 15,7 17,5 17,5 17,5 17,5 17,5 17,5 19,5 21,5 23,0 24,5 24,5 24,5 26,0 27,5 30,0 32,2 32,2 32,2 38,0 38,0 38,0 38,0 38,0 41,1 41,1 41,1 41,1 40,8 40,8 40,8 29,0 29,0 29,0 29,0 31,2 33,0 33,0 33,0 33,0 33,0 33,0 34,9 35,5 37,2 38,7 38,7 38,7 40,2 44,9 46,0 51,3 51,3 51,3 54,3 54,3 54,3 54,3 54,3 57,5 57,5 57,5 57,5 57,5 57,5 57,5 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 2 ENTRY SIZE 04 05 06 07 08 10 12 14 16 18 20 22 24 OZ MIN 6,35 7,92 9,53 11,10 12,70 15,88 19,05 22,23 25,40 28,58 31,75 34,93 38,10 TABLE 3 MFR CODE A B C D R - CONNECTOR MANUFACTURER (MS 3100, MS 3101 & MS 3106) AMPHENOL - CLASS A BENDIX - CLASS A, E & R CANNON - CLASS A, E & R MFR UNKNOWN, CLASS A, E & R AMPHENOL - CLASS R MFR CODE NOT REQUIRED OS 9,49 +/-0,04 11,06 +/-0,04 12,66 +/-0,04 14,21 +/-0,07 15,81 +/-0,07 18,96 +/-0,08 22,14 +/-0,08 25,30 +/-0,08 28,48 +/-0,08 31,65 +/-0,08 34,83 +/-0,08 37,98 +/-0,08 41,15 +/-0,08 OY 0,3 14,00 15,50 17,10 18,70 20,30 23,50 26,70 29,80 33,00 36,20 39,40 42,50 45,70 OK MAX NA 21,0 21,0 21,0 24,5 29,0 32,5 35,5 37,0 40,0 43,5 48,5 52,1 F 0,5 NA 12,5 12,5 12,5 13,1 13,5 14,5 15,5 16,1 16,5 17,0 18,5 21,9 G 0,5 NA 27,5 27,5 27,5 28,0 29,0 29,7 30,5 30,9 31,1 32,1 35,3 38,1 H 0,5 NA 24,0 24,0 24,0 27,0 31,0 34,0 35,0 38,0 42,0 45,0 54,5 58,0 M 0,5 NA 15,5 15,5 15,5 17,0 19,5 21,0 20,0 21,5 24,0 25,5 31,0 33,0 J 0,5 NA 27,95 27,95 27,95 29,45 31,00 32,70 34,25 35,80 37,40 38,90 42,00 46,00 H 0,5 NA 24,3 24,3 24,3 28,3 31,1 34,2 38,5 40,7 43,7 46,4 50,0 53,5 M 0,5 NA 17,2 17,2 17,2 19,4 21,0 22,8 25,3 26,1 27,6 29,1 31,0 33,0 J 0,5 NA 28,2 28,2 28,2 29,7 31,2 32,9 34,5 36,1 37,6 39,1 42,0 46,0 A THREAD OB 28,40 MAX 7 If this document is printed it becomes uncontrolled. Check for the latest revision DATE DRAWN K.WINCZURA 18/12/2014 CHECKED 18/12/2014 APPROVED K.SHEPPARD 19/12/2014 APPROVED H.SMITH 07/07/2015 REVISIONS LTR DESCRIPTION J REVISED PER ECO-15-002435 K REVISED PER ECO-15-009990 3RD ANGLE PROJECTION NOT TO SCALE UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM ANGULAR +/- 1 DATE 18/02/2015 APPROVED H.SMITH 07/07/2015 H.SMITH TE CAGE CODE: 06090 POLAMCO/TE CAGE CODE: U5792 TITLE: TINEL-LOCK BACKSHELL ASSY USED ON: MIL-DTL-5015D TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. DRAWING NO: DRAWING REV: SHT TXR18 K 3