Features Regulated Converters * * * * * * 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield No Minimum Load Required DC/DC Converter RP30-F Description The RP30-F series DC/DC converters are designed to meet to UL 60950-1 and to cUL60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2" x 1" package meets military standards for thermal shock and vibration tolerance. 30 Watt 3Y EAR 3 wa rranty 2"x1"Package Single & Dual Output Selection Guide Part Number RP30-123.3SF(3,4) RP30-1205SF(3,4) RP30-1212SF(3,4) RP30-1215SF(3,4) RP30-243.3SF(3,4) RP30-2405SF(3,4) RP30-2412SF(3,4) RP30-2415SF(3,4) RP30-483.3SF(3,4) RP30-4805SF(3,4) RP30-4812SF(3,4) RP30-4815SF(3,4) RP30-1205DF(3,4) RP30-1212DF(3,4) RP30-1215DF(3,4) RP30-2405DF(3,4) RP30-2412DF(3,4) RP30-2415DF(3,4) RP30-4805DF(3,4) RP30-4812DF(3,4) RP30-4815DF(3,4) Input Voltage Range [VDC] 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 Output Voltage [VDC] 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 5 12 15 5 12 15 5 12 15 Output Current [mA] 8000 6000 2500 2000 8000 6000 2500 2000 8000 6000 2500 2000 3000 1250 1000 3000 1250 1000 3000 1250 1000 Input(1) Efficiency(1) Current typ. [mA] [%] 2588 85 2874 87 2809 89 2809 89 1264 87 1389 90 1374 91 1374 91 632 87 694 90 687 91 687 91 2874 87 2874 87 2874 87 1389 90 1404 89 1389 90 694 90 710 88 702 89 Max. Capacitive Load(2) [F] 20000 14400 3000 2000 20000 14400 3000 2000 20000 14400 3000 2000 3000 2000 1300 3000 2000 1300 3000 2000 1300 Notes: Note1: Typical value at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load. E196683 UL60950-1 Certified Model Numbering RP30-__ __ _F/_ _ Input Voltage Output Voltage Package(4) Control Logic(3) Single or Dual Ordering Examples RP30-2405SF = 24V Input, 5V Output, Positive Logic CTRL pin fitted RP30-4812DF/N-HC = 48V Input, 12V Output, Negative Logic CTRL pin fitted, Heat-sink fitted Notes: Note3: no suffix for CTRL function with Positive Logic (1=ON, 0=OFF) add "N" for CTRL function with Negative Logic (0=ON, 1=OFF) Note4: add suffix -HC for premounted Heat-sink and clips www.recom-power.com REV.: 1/2016 PD-1 RP30-F DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted BASIC CHARACTERISTICS Parameter Input Voltage Range Under Voltage Lockout (UVLO) Condition Min. Typ. Max. nom. Vin = 12V nom. Vin = 24V nom. Vin = 48V 9VDC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Vin = 12V DC-DC ON DC-DC OFF 8VDC 9VDC Vin = 24V DC-DC ON DC-DC OFF 16VDC Vin = 48V DC-DC ON DC-DC OFF 32VDC 18VDC 36VDC Input Filter Pi-Type Input Reflected Ripple Current nominal Vin and full load Input Surge Voltage Vin = 12V, 100ms max. Vin = 24V, 100ms max. Vin = 48V, 100ms max. (5) 20mAp-p 25VDC 50VDC 100VDC Power up Remote ON/OFF Start-up time 30ms 30ms Operating Frequency Range 387kHz Minimum Load 430kHz 473kHz 0% measured by 20Mhz bandwidth 3.3Vout, 5Vout with a 1F/50V MLCC 12Vout, 15Vout Ripple and Noise 100mVp-p 150mVp-p Positive Logic DC-DC ON DC-DC OFF Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V Negative Logic DC-DC ON DC-DC OFF Short or 0V < Vr < 1.2V Open or 3.0V < Vr < 12V Remote ON/OFF(6) DC-DC OFF Input current of Remote pin (CTRL) 3mA DC-DC ON -0.5mA 0.5mA Notes: Note5: Simulated source impedance of 12H. 12H inductor in series with +Vin. Note6: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin. RP30-1205SF Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 9Vin 12Vin 18Vin 50 45 40 10 20 30 40 50 60 70 80 90 85 80 75 70 65 100 9 10 11 12 13 14 15 16 17 18 Input Voltage [VDC] Output Current [%] continued on next page PD-2 REV.: 1/2016 www.recom-power.com RP30-F DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted RP30-2405SF Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 18Vin 24Vin 36Vin 50 45 40 10 20 30 40 50 60 70 80 90 85 80 75 70 65 100 18 20 22 Output Current [%] RP30-4805SF 24 26 28 30 32 34 36 72 75 Input Voltage [VDC] Efficiency vs. Output Current Efficiency vs. Input Voltage 95 95 90 90 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 36Vin 48Vin 75Vin 50 45 40 85 80 75 70 65 10 20 30 40 50 60 70 80 90 100 36 40 Output Current [%] 44 48 52 56 60 64 68 Input Voltage [VDC] REGULATIONS Parameter Condition Value Output Voltage Accuracy 1% Voltage Adjustability Line Voltage Regulation Load Voltage Regulation Single Output 10% low line to high line at full load 0.2% no load to full load Cross Regulation Transient Response recovery time Single Dual 0.5% 1.0% asymmetrical 25%<>100% load 5% 25% load step change 250s External Output Trimming Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resis tor required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below. Trim up Trim down 6 6 RU 5 RD 4 continued on next page www.recom-power.com REV.: 1/2016 PD-3 RP30-F DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted RP30-xx3.3SF Trim up 1 2 3 4 5 6 7 8 9 Vout = 3.333 3.366 3.399 3.432 3.465 3.498 3.531 3.564 3.597 3.63 Volts RU = 57.93 26.16 15.58 10.28 7.11 4.99 3.48 2.34 1.46 0.75 KOhms 1 2 3 4 5 6 7 8 9 10 Vout = 3.267 3.234 3.201 3.168 3.135 3.102 3.069 3.036 3.003 2.97 Volts RD = 69.47 31.23 18.49 12.12 8.29 5.74 3.92 2.56 1.50 0.65 KOhms 2 3 4 5 6 7 8 9 10 Trim down 10 % % RP30-xx05SF Trim up 1 % Vout = 5.05 5.10 5.15 5.20 5.25 5.30 5.35 5.4 5.45 5.50 Volts RU = 36.57 16.58 9.92 6.58 4.59 3.25 2.30 1.59 1.03 0.59 KOhms 1 2 3 4 5 6 7 8 9 10 Vout = 4.95 4.90 4.85 4.80 4.75 4.70 4.65 4.60 4.55 4.50 Volts RD = 45.53 20.61 12.31 8.15 5.66 4.00 2.81 1.92 1.23 0.68 KOhms % Trim down % RP30-xx12SF Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 12.12 12.24 12.36 12.48 12.60 12.72 12.84 12.96 13.08 13.20 Volts RU = 367.91 165.95 98.64 64.98 44.78 31.32 21.70 14.49 8.88 4.39 KOhms 1 2 3 4 5 6 7 8 9 10 Trim down % Vout = 11.88 11.76 11.64 11.52 11.40 11.28 11.16 11.04 10.92 10.8 Volts RD = 460.99 207.95 123.60 81.42 56.12 39.25 27.20 18.16 11.13 5.51 KOhms RP30-xx15SF Trim up 1 2 3 4 5 6 7 8 9 10 Vout = 15.15 15.3 15.45 15.60 15.75 15.90 16.05 16.20 16.35 16.50 Volts RU = 404.18 180.59 106.06 68.80 46.44 31.53 20.88 12.90 6.69 1.72 KOhms 1 2 3 4 5 6 7 8 9 10 Trim down % % Vout = 14.85 14.70 14.55 14.40 14.25 14.10 13.95 13.80 13.65 13.50 Volts RD = 499.82 223.41 131.27 85.20 57.56 39.14 25.97 16.10 8.42 2.282 KOhms PROTECTIONS Parameter Condition Short Circuit Protection (SCP) Continuous, automatic recovery 3.3Vout 5Vout Zener Diode Clamp 12Vout 15Vout Over Voltage Protection (OVP) Over Load Protection (OLP) % of Iout rated Over Temperature Protection (OTP) Isolation Voltage Isolation Resistance Value 3.9VDC 6.2VDC 15VDC 18VDC 150% typ. 115C typ. I/P to O/P I/P to O/P to case 500VDC Isolation Capacitance 1.6kVDC/1 minute 1.6kVDC/1 minute 1G min. 1500pF max. Notes: Note8: This power module is not internally fused. An input line fuse must always be used. PD-4 REV.: 1/2016 www.recom-power.com RP30-F DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted ENVIRONMENTAL Parameter Condition Value without derating with derating Operating Temperature Range -40C o +74C -40C to +97C Maximum Case Temperature +105C Temperature Coefficient 0.02%/C max. Natural convection (20LFM) Natural convection (20LFM) with Heat-sink Thermal Impedance 12C/Watt 10C/Watt Operating Humidity 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MIL-HDBK-217F Bellcore TR-NWT-000332(9) MTBF Derating Graph(10) RP30-2415SF RP30-2415SF with Heat-sink 80 80 Output Power [%] 100 Output Power [%] 100 60 40 20 0 -40 -20 0 20 40 1453 x 103 hours 3173 x 103 hours 60 74 80 60 40 20 0 -40 100 120 97 Ambient Temperature [C] -20 0 20 40 60 75 80 100 120 97 Ambient Temperature [C] Notes: Note9: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment) MIL-HDBK-217F Notice2 @ TA= 25C, Full load (Ground, Benign, controlled environment) Note10:Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part number not shown here please contact our technical support service at techsupportAT@recom-power.com SAFETY AND CERTIFICATIONS Certificate Type (Safety) UL General Safety EMC Compliance EMI Standard (11) ESD Radiated Immunity Fast Transient(12) Surge(12) Conducted Immunity Report / File Number E196683 Standard UL60950-1 1st. Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 Condition Standard / Criterion with external filter EN55022, Class A or B Air 8kV and Contact 6kC 10 V/m 2kV 1kV 10 Vr.m.s EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A continued on next page www.recom-power.com REV.: 1/2016 PD-5 RP30-F DC/DC Converter Series C2 Fuse +VOUT +VIN Input DC C1 Notes: DC Note12: The standard modues meet EMI Class A or Class B with external components, see filter suggestions below. -V -VIN Note13: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: 12VDC & 24VDC input Nippon chemi-con KY series, 330F/50V C3 48VDC input Nippon chemi-con KY series, 220F/100V LOAD Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted OUT C4 EMI Filtering Class A C2 Fuse Input DC DC C2 LOAD C1 COM DC DC -VOUT -VOUT -VIN -VIN C3 C4 C4 C4 RP30-24xxSF+V RP30-24xxDF DC C2 LOAD OUT +VIN RP30-48xxSF COM DC RP30-48xxDF LOAD Fuse -VOUT -VIN EMI Filtering Class B Fuse Input L1 Input C4 C1 1000pF/2kV 1808 MLCC 4.7F/50V 1812 MLCC 1000pF/2kV 1808 MLCC 2.2F/100V 1812 MLCC 1000pF/2kV C4 1808 MLCC C4 +VOUT +VIN L1 C1 10F/25V 1812 MLCC L1 C4 Fuse C2/C3/C4 DC L1 C2 C3 C2 C3 +VIN DC +VOUT LOAD RP30-12xxSF C3 RP30-12xxDF C1 -VOUT LOAD MODEL Input +VOUT +VIN LOAD +VOUT +VIN LOAD Fuse Input C3 DC -VIN DC -VOUT -VIN C5 C5 C6 C6 C4 Input Fuse L1 +VOUT DC L1 C1 C2 C3 C1 C2 C3 +VOUT COM +VIN DC DC -VOUT COM -VIN DC -VOUT -VIN PD-6 LOAD C4 +VIN LOAD LOAD Input L1 LOAD L1 Fuse C5 continued on next page C6 C5 REV.: 1/2016 C6 www.recom-power.com RP30-F DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted MODEL C1/C2/C3 C4/C5/C6 L1 L2 RP30-12xxSF RP30-12xxDF 10F/25V 1812 MLCC 1000pF/2kV 1808 MLCC CMC: 33.3H CMC: 55H ref.: WE 744842932 ref.: WE 744290560 ref.: CMC-09 ref.: CMC-10 RP30-24xxSF RP30-24xxDF 4.7F/50V 1812 MLCC 1000pF/2kV 1808 MLCC CMC: 33.3H CMC: 55H ref.: WE 744842932 ref.: WE 744290560 ref.: CMC-09 ref.: CMC-10 RP30-48xxSF RP30-48xxDF 2.2F/100V 1812 MLCC 1000pF/2kV 1808 MLCC CMC: 33.3H CMC: 55H ref.: WE 744842932 ref.: WE 744290560 ref.: CMC-09 ref.: CMC-10 DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper FR4 PCB Epoxy (UL94-V0) Package Dimensions (LxWxH) without Heat-sink with Heat-sink 50.8 x 25.4 x 10.2mm 56.8 x 25.4 x 16.8mm Package Weight without Heat-sink with Heat-sink 30.5g 41.39g Dimension Drawing (mm) 25.4 5.60 10.2 50.8 Pin Connections 2 Bottom View Pin # 5 10.20 15.20 2.54 4 1 3 12.70 5.10 45.72 5.08 O1.00 6 Dimension Drawing (mm) with Heat-sink 24.20 1.30 50.0 Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 CTRL CTRL 4 +Vout +Vout 5 -Vout Com 6 Trim -Vout Pin Pitch Tolerance 0.25 mm Pin Dimension Tolerance 0.1mm Tolerance: X.X 0.5mm X.XX 0.25mm 1.95 Top View Heat-sink 1.30 25.4 5.60 10.2 16.8 5.85 1.40 O1.0 56.8 www.recom-power.com REV.: 1/2016 PD-7 RP30-F DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted PACKAGING INFORMATION Parameter Packaging Quantity Type without Heat-sink Tube with Heat-sink Tray Storage Temperature Range Value 9pcs. 20pcs. -55C to +125C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. PD-8 REV.: 0/2015 www.recom-power.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: RECOM: RP30-1205DF RP30-1205DF/N RP30-1205DF/N-HC RP30-1205DF-HC RP30-1205SF RP30-1205SF/N RP301205SF/N-HC RP30-1205SF-HC RP30-1212DF RP30-1212DF/N RP30-1212DF/N-HC RP30-1212DF-HC RP301212SF RP30-1212SF/N RP30-1212SF/N-HC RP30-1212SF-HC RP30-1215DF RP30-1215DF/N RP30-1215DF/NHC RP30-1215DF-HC RP30-1215SF RP30-1215SF/N RP30-1215SF/N-HC RP30-1215SF-HC RP30-123.3SF RP30-123.3SF/N RP30-123.3SF/N-HC RP30-123.3SF-HC RP30-2405DF RP30-2405DF/N RP30-2405DF/N-HC RP30-2405DF-HC RP30-2405SF RP30-2405SF/N RP30-2405SF/N-HC RP30-2405SF-HC RP30-2412DF RP302412DF/N RP30-2412DF/N-HC RP30-2412DF-HC RP30-2412SF RP30-2412SF/N RP30-2412SF/N-HC RP302412SF-HC RP30-2415DF RP30-2415DF/N RP30-2415DF/N-HC RP30-2415DF-HC RP30-2415SF RP302415SF/N RP30-2415SF/N-HC RP30-2415SF-HC RP30-243.3SF RP30-243.3SF/N RP30-243.3SF/N-HC RP30243.3SF-HC RP30-4805DF RP30-4805DF/N RP30-4805DF/N-HC RP30-4805DF-HC RP30-4805SF RP304805SF/N RP30-4805SF/N-HC RP30-4805SF-HC RP30-4812DF RP30-4812DF/N RP30-4812DF/N-HC RP304812DF-HC RP30-4812SF RP30-4812SF/N RP30-4812SF/N-HC RP30-4812SF-HC RP30-4815DF RP304815DF/N RP30-4815DF/N-HC RP30-4815DF-HC RP30-4815SF RP30-4815SF/N RP30-4815SF/N-HC RP304815SF-HC RP30-483.3SF RP30-483.3SF/N RP30-483.3SF/N-HC RP30-483.3SF-HC