Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 12.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Photoelectric sensor
diffuse mode laser sensor
QS30LDLQ
diffuse mode laser sensor with 800
mm sensing range
laser class 2
adjustable time delay up to 30 ms
8-segment LED status indicator
light and dark operation
operational voltage 10..0.30 VDC
Wiring diagram
The emitter and receiver are incorporated
in a single housing. The light reflection of
the target is detected and triggers the sen-
sor to switch. Thus the switching distance
depends largely on the reflectivity of the
target.
Excess gain curve
Excess gain in relation to the distance
BN (1)
WH (2)
BU (3)
+
BK (4)
GY (5)
teach
10 100 1000 mm1
1
10
100
1000
Type QS30LDLQ
Ident-No. 3002786
Operating mode Diffuse mode sensor
Type of light red
Wave length 650 nm
Laser-class 2 (EN 60825, IEC 60825)
Beam-diameter 2 mm
Sensing range [mm] 0... 800 mm
Operating temperature -10 ...+ 50 °C
Rated operational voltage (DC) UB10... 30 VDC
Rated operational current (DC) Ie 150 mA
No-load current I0 35 mA
Short-circuit protection yes, cyclic
Reverse polarity protection yes
Output function normally open, PNP/NPN
Max. switching frequency 1 kHz
Time delay before availability 150 ms
Housing style rectangular; QS30
Dimensions 35 x 22 x 57 mm
Housing material plastic, ABS
Lens plastic, Acryl
Wiring connector, M12 x 1
Degree of protection IP67
Supply voltage indication LED green
Switching status indication LED yellow
22
teach
LED
32,5
ø 3,3
M30 x 1,5
M12 x 1
36/10
20
3,5
LED YE
LED GN
44
57
33