HRHT (High Ratio Heat-Shrink Tubing) W EXPANDED AS SUPPLIED FULLY RECOVERED AFTER HEATING d D ADHESIVE Table of Dimensions, inch (mm): Part Description Expanded I.D. D, Min. HRHT-1/X HRHT-2/X HRHT-3/X HRHT-4/X HRHT-5/X 0.75 (19) 1.50 (38) 2.00 (51) 3.00 (76) 4.50 (114) Recovered I.D. d, Max. 0.12 0.23 0.36 0.50 0.75 Recovered Wall W, Ref. (3.0) (5.8) (9.0) (12.7) (19.0) 0.155 0.155 0.155 0.155 0.155 (3.9) (3.9) (3.9) (3.9) (3.9) Notes: 1. 2. The hi-ratio tubing is heat-shrinkable and has expansion ratios as high as 6:1. "X" indicates reference-recovered length in inches (e.g. for 3.0-inch length: HRHT-2/3). The tolerance shall be +/- 10% of the specified recovered length. The tubing is UL recognized in sizes 1 through 4 only. The reference number is E85381(R). 3. -152, heat shrinkable, crosslinked flexible polyolefin. Standard factory applied hot melt adhesive is /97 or /42, as required. Material: Color: Black Specification Reference: Item Heat-shrinkable tubing Adhesive /97, S1297 Adhesive /42, S1017 Specification SAE-AS81765/1 RW-2019 RT-1050/1 CUSTOMER DRAWING TITLE: Raychem Tubing 305 Constitution Drive, Menlo Park, CA 94025 Unless otherwise specified dimensions are in inches. [Metric dimensions are shown in brackets HRHT High Ratio Heat-Shrink Tubing DOCUMENT NO.: HRHT-1thru5/X REV: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. C SCALE: DATE: None DRAWN BY: CAGE CODE: DCR NO. : Org. Date: File: U. Nguyen 06090 R090640 HRHT-1thru5X.doc 5/28/09 (c) 2007-2009 Tyco Electronics Corporation. All rights reserved If this document is printed it becomes uncontrolled. Check for the latest revision. July 15, 2009 SIZE A SHEET: 1 of 2 Table 2: Properties Physical Property Tensile Strength Ultimate Elongation Specific Gravity Water Absorption Hardness Flammability Corrosion Resistance Low Temperature Flexibility 4 hours at -67 2F (-55 1C) Heat Resistance 168 hours at 347 2F (175 1C) Heat Shock 4 hours at 437 5F (225 2C) Elastic Memory Dielectric Strength Volume Resistivity Chemical Fluid Resistance Electrical Operating Temperature Rev. Date: July 15, 2009 Performance 1200 psi (8.3 Mpa) minimum 250% minimum 1.4 maximum 0.5% maximum 35 5 Shore D Pass Pass Pass Test Method ASTM D-412 ASTM D-412 ASTM D-792 ASTM D-570 A ASTM D-2240 ASTM D-635 MIL-I-81765 MIL-I-81765 Ultimate elongation, 200% minimum Tensile strength, 1000 psi (6.9 Mpa) minimum No cracking, dripping or flowing MIL-I-81765 MIL-I-81765 275% minimum expansion to 4 inch (10 cm) of a fully recovered test specimen and 93% recovery of expanded specimen after oven conditioning for 1 minute at 302 4F (150 2C) 200 V/mil (7880 V/mm) minimum ASTM D-149 1012 ohm-cm minimum ASTM D-257 Ultimate elongation, 200% minimum MIL-I-81765 Tensile strength, 750 psi (5.2 Mpa) minimum -131 to + 275F (-55 to +135 C) (without adhesive) Sheet: 2 of 2 If this document is printed it becomes uncontrolled. Check with the web for the latest revision. Document No. HRHT-1thru5/X Rev.: C