SECTION A-A End View of Assembly Top View of Assembly A SECTION A-A Without Optional Bottom Panel 2.38 [.09] 254.00 [10.00] 223.84 [8.81] B 70.49 [2.78] (Inner Box Height) B 11.83 [.47] 2.24 [.09] A 76.20 [3.00] 401.64 [15.81] 431.80 [17.00] 13.86 [.55] Top View of Frame 5.79 SECTION B-B Side View of Assembly 17.96 [.71] 28.58 [1.13] 19.05 [.75] 15.00 [.59] 6.05 [.24] 88.03 [3.47] [.23] 158.75 [6.25] 215.90 [8.50] (Inside Box Width) 1.14 [.05] 393.70 [15.50] (Inside Box Length) Enclosures can be Factory Modified ( Milling, Drilling, Printing etc.) Contact Factory mjm@hammondmfg.com for quotes Solid models of this enclosure available in STEP or IGES. 336.55 [13.25] Chassis Includes Solid Walnut Frame, one (1) Aluminum Panel, Rubber Feet and Required Hardware Aluminum Panels are Made of 0.080" Aluminum. NOTE Aluminum Panel (Top or Bottom) Screws should not be torqued past 4.43 lbf.in (50 cN.m) PART NUMBERS 17''x10'' Enclosure (Natural Finish) Chassis with Natural Finish Panel HWCHAS1710AL Natural Finish Panel 222.25 203.20 [8.75] [8.00] HW1710ALPL 17''x10'' Enclosure (Satin Black) Chassis with Satin Black Panel HWCHAS1710BK Satin Black Panel HW1710BKPL 2.03 [.080] 381.00 [15.00] 400.05 [15.75] Dimensions: mm [inches] HWCHAS1710