Screw Terminals / Binding Posts Loose Part No. 1117 ST. S 1117 1116 ST. S 0.032" (0.81mm) Pre-plated Brass Standard Finish Pre-Tinned Brass Pre-Tinned Brass Pre-Tinned Brass Pre-Tinned Brass Pre-Tinned Brass Screw Type Stainless Steel Binding Head 1/4" (6.35mm) x 6-32 No Screw Stainless Steel No Screw Binding Head 1/4" (6.35mm) x 6-32 Stainless Steel Binding Head 1/4" (6.35mm) x 6-32 Screw Position Inserted & Down N/A Inserted & Down N/A Inserted, Staked & Backed Out Wire Stop No No Yes Yes Yes Typical PCB Mounting Hole Configuration 0.295 (7.49) 0.452 (11.43) 0.073(1.85) 0.197(5.00) 0.275 (6.99) 0.312 (7.92) 0.512 (13.00) Wire Stop 0.153 (3.89) 0.032" (0.81mm) Pre-plated Brass 0.032" (0.81mm) 0.032" (0.81mm) Pre-plated Brass Pre-plated Brass Screw & Position Optional See Ordering Data 0.312 (7.92) 1202 ST. S Material Thickness/ 0.032" (0.81mm) Type Pre-plated Brass 0.032 (0.81) 0.170 (4.32) 1116 0.032 (0.81) 0.060 (1.52) 0.062 (1.57) 0.093(2.36) 0.295(7.49) 0.197(5.00) 0.225 (5.72) For exact finish specifications and available special finishes, see Finish Table (page 106). Typical PCB Mounting Configuration Clamp Down Condition 0.400 (10.16) 0.150(3.81) Lead Wire Loose Part No. 1030 Material Thickness/ Type 0.032" (0.81mm) Brass Screw Type Stainless Steel Binding Head 5/16" (7.92mm) x 6-32 Screw Position Down until just touching surface of part Standard Finish 100% Tin over Copper 0.055 (1.40) 0.144(3.66) 0.340 Ref (8.64) 6-32 Screw 0.10 (2.54) 0.250 Ref (6.35) Wire Retainers 4 Pl. 0.12(3.05) 0.150(3.81) 0.050/0.054 (1.27/1.37) 0.265 (6.73) 0.432 (10.97) 0.032 (0.81) Note: Hidden Surfaces Not Shown to Maintain Illustration Clarity Made in U.S.A. 0.168 (4.27) For exact finish specifications and available special finishes, see Finish Table (page 106). 131 Radio Circle, Mount Kisco, NY 10549 800-882-8020 * 914-666-2911 * Fax: 914-666-0216 www.zierick.com 91