R60 NISSEI-ARCOTRONICS MKT Series Bulk Taped Fig. 1 METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS Fig. 2 Typical application: blocking, coupling, decoupling, bypassing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). SERIES CODE: R60 NOTE: p = 10 0.6 P > 10 0.8 Fig. 1 P2 (mm) 12.7 All dimensions are in mm. Fig. 2 19.05 Od 0.05 Special version, in compliance with DIN 44122, is available upon request. Construction: * STACKED technology for 10 mm lead spacing (Rated Voltage from 63 to 630Vdc) * WOUND technology from 10 to 27.5mm lead spacing (Rated Voltage from 63 to 1000Vdc) PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 [ ] R6 0 1. 2. 3. Series code Capacitance value in pico farads. First 2 digits are significant and 3rd digit indicates number of zeros. Capacitance tolerance J = 5% K = 10% 4. 5. D.C. voltage Packaging code 6. Lead spacing (mm) B = bulk F = 10 R = 27.5 7. 9. A = ammo I = 15 W = 37.5 M = 20% R = reel N = 22.5 Lead length (mm) - (Applies to bulk packaging only. Omit for standard lead length 4-6mm.) L = 15 min. 8. 9 T = 3.5-4.0 V = 2.7-3.3 Construction (omit for wound construction) Q = Stacked version Internal code GENERAL TECHNICAL DATA Dielectric: Plates: polyester film (polyethylene terephthalate). aluminum layer deposited by evaporation under vacuum Winding: non-inductive type Leads: tinned wire Protection: plastic case, epoxy resin filled. Box material is solvent resistant and flame retardant according to UL94 V0 Marking: Manufacturer's logo, capacitance, tolerance, D.C. voltage Climatic category: 55/100/56 IEC 60068-1 Operating temperature range: -55 to +105C For stacked technology an upper operating temperature of +125C is allowed for a max. operating time of 1000h. Related documents: IEC 60384-2; CECC 30400 Winding scheme single sided metallized polyester film R60 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS SERIES CODE: R60 STACKED VERSION 1.0F 1.5F 2.2F 3.3F 63Vdc/40Vac B 4.0 5.0 5.0 6.0 Rated Cap. 0.33F 0.47F 0.68F 1.0F 1.5F Rated Cap. H 9.0 11.0 11.0 12.0 L 13.0 13.0 13.0 13.0 P 10.0 10.0 10.0 10.0 100Vdc/63Vac B 4.0 4.0 4.0 5.0 5.0 H 9.0 9.0 9.0 11.0 11.0 L 13.0 13.0 13.0 13.0 13.0 P 10.0 10.0 10.0 10.0 10.0 Max dv/dt (V/s) 50 50 50 50 Max dv/dt (V/s) 75 75 75 75 75 Max K0 2 (V /s) 6.3 E3 6.3 E3 6.3 E3 6.3 E3 R60105-63-F-Q R60155-63-F-Q R60225-63-F-Q R60335-63-F-Q Max K0 Part Number 2 (V /s) 15 E3 15 E3 15 E3 15 E3 15 E3 Max Max K0 dv/dt B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 100 32 E3 0.22F 4.0 9.0 13.0 10.0 100 32 E3 0.33F 5.0 11.0 13.0 10.0 100 32 E3 0.47F 6.0 12.0 13.0 10.0 100 32 E3 0.68F Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 160Vdc/90Vac Part Number R60334-100-F-Q R60474-100-F-Q R60684-100-F-Q R60105-100-F-Q R60155-100-F-Q Part Number R60224-160-F-Q R60334-160-F-Q R60474-160-F-Q R60684-160-F-Q Rated Cap. 0.10F 0.15F 0.22F 0.33F 0.47F Rated Cap. 0.033F 0.047F 0.068F 0.10F 0.15F Rated Cap. 250Vdc/160Vac B 4.0 4.0 5.0 5.0 6.0 H 9.0 9.0 11.0 11.0 12.0 L 13.0 13.0 13.0 13.0 13.0 P 10.0 10.0 10.0 10.0 10.0 400Vdc/200Vac B 4.0 4.0 4.0 5.0 6.0 H 9.0 9.0 9.0 11.0 12.0 L 13.0 13.0 13.0 13.0 13.0 P 10.0 10.0 10.0 10.0 10.0 Max dv/dt (V/s) 150 150 150 150 150 Max dv/dt (V/s) 175 175 175 175 175 Max K0 (V /s) 75 E3 75 E3 75 E3 75 E3 75 E3 R60104-250-F-Q R60154-250-F-Q R60224-250-F-Q R60334-250-F-Q R60474-250-F-Q Max K0 Part Number 2 (V /s) 140 E3 140 E3 140 E3 140 E3 140 E3 Max Max K0 dv/dt B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 200 250 E3 1000F 4.0 9.0 13.0 10.0 200 250 E3 1500F 4.0 9.0 13.0 10.0 200 250 E3 2200F 4.0 9.0 13.0 10.0 200 250 E3 3300F 4.0 9.0 13.0 10.0 200 250 E3 4700F 4.0 9.0 13.0 10.0 200 250 E3 6800F 0.010F 4.0 9.0 13.0 10.0 200 250 E3 0.015F 4.0 9.0 13.0 10.0 200 250 E3 0.022F 4.0 9.0 13.0 10.0 200 250 E3 0.033F 5.0 11.0 13.0 10.0 200 250 E3 0.047F 5.0 11.0 13.0 10.0 200 250 E3 Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 630Vdc/220Vac Part Number 2 R60333-400-F-Q R60473-400-F-Q R60683-400-F-Q R60104-400-F-Q R60154-400-F-Q Part Number R60102-630-F-Q R60152-630-F-Q R60222-630-F-Q R60332-630-F-Q R60472-630-F-Q R60682-630-F-Q R60103-630-F-Q R60153-630-F-Q R60223-630-F-Q R60333-630-F-Q R60473-630-F-Q All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. In progress Rated Cap. R60 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS SERIES CODE: R60 WOUND VERSION Rated Cap. Max Max K0 dv/dt B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 6.0 0.75 E3 0.47F 4.0 9.0 13.0 10.0 6.0 0.75 E3 0.68F 5.0 11.0 13.0 10.0 6.0 0.75 E3 1.0F 6.0 12.0 13.0 10.0 6.0 0.75 E3 1.5F 5.0 11.0 18.0 15.0 2.5 0.32 E3 0.68F 5.0 11.0 18.0 15.0 2.5 0.32 E3 1.0F 5.0 11.0 18.0 15.0 2.5 0.32 E3 1.5F 6.0 12.0 18.0 15.0 2.5 0.32 E3 2.2F 7.5 13.5 18.0 15.0 2.5 0.32 E3 3.3F 8.5 14.5 18.0 15.0 2.5 0.32 E3 4.7F 10.0 16.0 18.0 15.0 2.5 0.32 E3 6.8F 6.0 15.0 26.5 22.5 1.5 0.19 E3 3.3F 7.0 16.0 26.5 22.5 1.5 0.19 E3 4.7F 7.0 16.0 26.5 22.5 1.5 0.19 E3 6.8F 8.5 17.0 26.5 22.5 1.5 0.19 E3 10.0F 9.0 17.0 32.0 27.5 1.0 0.13 E3 10.0F 11.0 20.0 32.0 27.5 1.0 0.13 E3 15.0F 13.0 22.0 32.0 27.5 1.0 0.13 E3 22.0F 14.0 28.0 32.0 27.5 1.0 0.13 E3 33.0F 18.0 33.0 32.0 27.5 1.0 0.13 E3 47.0F 22.0 37.0 32.0 27.5 1.0 0.13 E3 68.0F 11.0 22.0 41.5 37.5 0.8 0.10 E3 22.0F 13.0 24.0 41.5 37.5 0.8 0.10 E3 33.0F 16.0 28.5 41.5 37.5 0.8 0.10 E3 47.0F 19.0 32.0 41.5 37.5 0.8 0.10 E3 68.0F 24.0 44.0 41.5 37.5 0.8 0.10 E3 100.0F Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 63Vdc/40Vac Part Number R60474-63-FR60684-63-FR60105-63-FR60155-63-FR60684-63-IR60105-63-IR60155-63-IR60225-63-IR60335-63-IR60475-63-IR60685-63-IR60335-63-NR60475-63-NR60685-63-NR60106-63-NR60106-63-RR60156-63-RR60226-63-RR60336-63-RR60476-63-RR60686-63-RR60226-63-WR60336-63-WR60476-63-WR60-686-63-WR60-107-63-W- Rated Cap. Max Max K0 dv/dt B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 9.0 1.8 E3 0.33F 5.0 11.0 13.0 10.0 9.0 1.8 E3 0.47F 6.0 12.0 13.0 10.0 9.0 1.8 E3 0.68F 5.0 11.0 18.0 15.0 3.0 0.6 E3 0.33F 5.0 11.0 18.0 15.0 3.0 0.6 E3 0.47F 5.0 11.0 18.0 15.0 3.0 0.6 E3 0.68F 5.0 11.0 18.0 15.0 3.0 0.6 E3 1.0F 7.5 13.5 18.0 15.0 3.0 0.6 E3 1.5F 8.5 14.5 18.0 15.0 3.0 0.6 E3 2.2F 10.0 16.0 18.0 15.0 3.0 0.6 E3 3.3F 6.0 15.0 26.5 22.5 2.0 0.4 E3 1.5F 6.0 15.0 26.5 22.5 2.0 0.4 E3 2.2F 7.0 16.0 26.5 22.5 2.0 0.4 E3 3.3F 8.5 17.0 26.5 22.5 2.0 0.4 E3 4.7F 10.0 18.5 26.5 22.5 2.0 0.4 E3 6.8F 9.0 17.0 32.0 27.5 1.5 0.3 E3 4.7F 9.0 17.0 32.0 27.5 1.5 0.3 E3 6.8F 11.0 20.0 32.0 27.5 1.5 0.3 E3 10.0F 13.0 22.0 32.0 27.5 1.5 0.3 E3 15.0F 14.0 28.0 32.0 27.5 1.5 0.3 E3 22.0F 18.0 33.0 32.0 27.5 1.5 0.3 E3 33.0F 22.0 37.0 32.0 27.5 1.5 0.3 E3 47.0F 11.0 22.0 41.5 37.5 1.0 0.2 E3 15.0F 13.0 24.0 41.5 37.5 1.0 0.2 E3 22.0F 16.0 28.5 41.5 37.5 1.0 0.2 E3 33.0F 19.0 32.0 41.5 37.5 1.0 0.2 E3 47.0F 24.0 44.0 41.5 37.5 1.0 0.2 E3 68.0F Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 100Vdc/63Vac Part Number R60334-100-FR60474-100-FR60684-100-FR60334-100-IR60474-100-IR60684-100-IR60105-100-IR60155-100-IR60225-100-IR60335-100-IR60155-100-NR60225-100-NR60335-100-NR60475-100-NR60685-100-NR60475-100-RR60685-100-RR60106-100-RR60156-100-RR60226-100-RR60336-100-RR60476-100-RR60156-100-WR60226-100-WR60336-100-WR60476-100-WR60686-100-W- All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. R60 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS SERIES CODE: R60 WOUND VERSION Rated Cap. Max Max K0 dv/dt B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 15.0 4.80 E3 0.22F 5.0 11.0 13.0 10.0 15.0 4.80 E3 0.33F 6.0 12.0 13.0 10.0 15.0 4.80 E3 0.47F 5.0 11.0 18.0 15.0 9.0 2.90 E3 0.33F 5.0 11.0 18.0 15.0 9.0 2.90 E3 0.47F 5.0 11.0 18.0 15.0 9.0 2.90 E3 0.68F 7.5 13.5 18.0 15.0 9.0 2.90 E3 1.0F 8.5 14.5 18.0 15.0 9.0 2.90 E3 1.5F 10.0 16.0 18.0 15.0 9.0 2.90 E3 2.2F 6.0 15.0 26.5 22.5 5.5 1.70 E3 1.5F 7.0 16.0 26.5 22.5 5.5 1.70 E3 2.2F 8.5 17.0 26.5 22.5 5.5 1.70 E3 3.3F 11.0 20.0 26.5 22.5 5.5 1.70 E3 4.7F 9.0 17.0 32.0 27.5 3.0 0.96 E3 3.3F 9.0 17.0 32.0 27.5 3.0 0.96 E3 4.7F 11.0 20.0 32.0 27.5 3.0 0.96 E3 6.8F 10.0F 15.0 24.5 32.0 27.5 3.0 0.96 E3 15.0F 18.0 33.0 32.0 27.5 3.0 0.96 E3 22.0F 22.0 37.0 32.0 27.5 3.0 0.96 E3 10.0F 11.0 22.0 41.5 37.5 2.0 0.64 E3 15.0F 13.0 24.0 41.5 37.5 2.0 0.64 E3 22.0F 16.0 28.5 41.5 37.5 2.0 0.64 E3 33.0F 19.0 32.0 41.5 37.5 2.0 0.64 E3 47.0F 24.0 44.0 41.5 37.5 2.0 0.64 E3 Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 160Vdc/90Vac All dimensions are in mm. Note: Part Number R60224-160-FR60334-160-FR60474-160-FR60334-160-IR60474-160-IR60684-160-IR60105-160-IR60155-160-IR60225-160-IR60155-160-NR60225-160-NR60335-160-NR60475-160-NR60335-160-RR60475-160-RR60685-160-RR60106-160-RR60156-160-RR60226-160-RR60106-160-WR60156-160-WR60226-160-WR60336-160-WR60476-160-W- Rated Cap. Max Max K0 dv/dt B H L P (V/s) (V2/s) 0.068F 4.0 9.0 13.0 10.0 20 10.0 E3 4.0 9.0 13.0 10.0 20 10.0 E3 0.10F 4.0 9.0 13.0 10.0 20 10.0 E3 0.15F 5.0 11.0 13.0 10.0 20 10.0 E3 0.22F 6.0 12.0 13.0 10.0 20 10.0 E3 0.33F 5.0 11.0 18.0 15.0 12 6.0 E3 0.10F 5.0 11.0 18.0 15.0 12 6.0 E3 0.15F 5.0 11.0 18.0 15.0 12 6.0 E3 0.22F 5.0 11.0 18.0 15.0 12 6.0 E3 0.33F 6.0 12.0 18.0 15.0 12 6.0 E3 0.47F 7.5 13.5 18.0 15.0 12 6.0 E3 0.68F 8.5 14.5 18.0 15.0 12 6.0 E3 1.0F 10.0 16.0 18.0 15.0 12 6.0 E3 1.5F 6.0 15.0 26.5 22.5 8 4.0 E3 0.47F 6.0 15.0 26.5 22.5 8 4.0 E3 0.68F 6.0 15.0 26.5 22.5 8 4.0 E3 1.0F 7.0 16.0 26.5 22.5 8 4.0 E3 1.5F 10.0 18.5 26.5 22.5 8 4.0 E3 2.2F 11.0 20.0 26.5 22.5 8 4.0 E3 3.3F 9.0 17.0 32.0 27.5 5 2.5 E3 1.5F 9.0 17.0 32.0 27.5 5 2.5 E3 2.2F 11.0 20.0 32.0 27.5 5 2.5 E3 3.3F 13.0 22.0 32.0 27.5 5 2.5 E3 4.7F 14.0 28.0 32.0 27.5 5 2.5 E3 6.8F 5 2.5 E3 10.0F 18.0 33.0 32.0 27.5 5 2.5 E3 15.0F 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 4 2.0 E3 4.7F 13.0 24.0 41.5 37.5 4 2.0 E3 6.8F 4 2.0 E3 10.0F 16.0 28.5 41.5 37.5 4 2.0 E3 15.0F 19.0 32.0 41.5 37.5 4 2.0 E3 22.0F 20.0 40.0 41.5 37.5 4 2.0 E3 33.0F 24.0 44.0 41.5 37.5 Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 250Vdc/160Vac Part Number R60683-250-FR60104-250-FR60154-250-FR60224-250-FR60334-250-FR60104-250-IR60154-250-IR60224-250-IR60334-250-IR60474-250-IR60684-250-IR60105-250-IR60155-250-I R60474-250-NR60684-250-NR60105-250-NR60155-250-NR60225-250-NR60335-250-NR60155-250-RR60225-250-RR60335-250-RR60475-250-RR60685-250-RR60106-250-RR60156-250-RR60475-250-WR60685-250-WR60106-250-WR60156-250-WR60226-250-WR60336-250-W- If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. R60 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS SERIES CODE: R60 WOUND VERSION Rated Cap. Max Max K0 dv/dt B H L P B 0.015F 4.0 9.0 13.0 10.0 30.0 24.0 E3 0.022F 4.0 9.0 13.0 10.0 30.0 24.0 E3 0.033F 4.0 9.0 13.0 10.0 30.0 24.0 E3 0.047F 4.0 9.0 13.0 10.0 30.0 24.0 E3 0.068F 5.0 11.0 13.0 10.0 30.0 24.0 E3 6.0 12.0 13.0 10.0 30.0 24.0 E3 0.10F 0.047F 5.0 11.0 18.0 15.0 20.0 16.0 E3 0.068F 5.0 11.0 18.0 15.0 20.0 16.0 E3 5.0 11.0 18.0 15.0 20.0 16.0 E3 0.10F 5.0 11.0 18.0 15.0 20.0 16.0 E3 0.15F 6.0 12.0 18.0 15.0 20.0 16.0 E3 0.22F 7.5 13.5 18.0 15.0 20.0 16.0 E3 0.33F 8.5 14.5 18.0 15.0 20.0 16.0 E3 0.47F 6.0 15.0 26.5 22.5 10.0 8.0 E3 0.22F 6.0 15.0 26.5 22.5 10.0 8.0 E3 0.33F 6.0 15.0 26.5 22.5 10.0 8.0 E3 0.47F 7.0 16.0 26.5 22.5 10.0 8.0 E3 0.68F 10.0 18.5 26.5 22.5 10.0 8.0 E3 1.0F 11.0 20.0 26.5 22.5 10.0 8.0 E3 1.5F 9.0 17.0 32.0 27.5 8.5 3.4 E3 0.68F 9.0 17.0 32.0 27.5 8.5 3.4 E3 1.0F 10.0 20.0 32.0 27.5 8.5 3.4 E3 1.5F 13.0 22.0 32.0 27.5 8.5 3.4 E3 2.2F 14.0 28.0 32.0 27.5 8.5 3.4 E3 3.3F 18.0 33.0 32.0 27.5 8.5 3.4 E3 4.7F 22.0 37.0 32.0 27.5 8.5 3.4 E3 6.8F 11.0 22.0 41.5 37.5 6.0 2.4 E3 3.3F 13.0 24.0 41.5 37.5 6.0 2.4 E3 4.7F 16.0 28.5 41.5 37.5 6.0 2.4 E3 6.8F 10.0F 19.0 32.0 41.5 37.5 6.0 2.4 E3 15.0F 24.0 44.0 41.5 37.5 6.0 2.4 E3 Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 400Vdc/200Vac All dimensions are in mm. Note 1: Note 2: Part Number H R60153-400-FR60223-400-FR60333-400-FR60473-400-FR60683-400-FR60104-400-FR60473-400-IR60683-400-IR60104-400-IR60154-400-IR60224-400-IR60334-400-IR60474-400-IR60224-400-NR60334-400-NR60474-400-NR60684-400-NR60105-400-NR60155-400-NR60684-400-RR60105-400-RR60155-400-RR60225-400-RR60335-400-RR60475-400-RR60685-400-RR60335-400-WR60475-400-WR60685-400-WR60106-400-WR60156-400-W- Rated Cap. Max Max K0 dv/dt B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 40 50 E3 4700F 4.0 9.0 13.0 10.0 40 50 E3 6800F 50 E3 0.010F 4.0 9.0 13.0 10.0 40 50 E3 0.015F 4.0 9.0 13.0 10.0 40 50 E3 0.022F 5.0 11.0 13.0 10.0 40 50 E3 0.033F 6.0 12.0 13.0 10.0 40 50 E3 0.047F 6.0 12.0 13.0 10.0 40 31 E3 0.033F 5.0 11.0 18.0 15.0 25 31 E3 0.047F 5.0 11.0 18.0 15.0 25 31 E3 0.068F 6.0 12.0 18.0 15.0 25 7.5 13.5 18.0 15.0 25 31 E3 0.10F 8.5 14.5 18.0 15.0 25 31 E3 0.15F 6.0 15.0 26.5 22.5 12 15 E3 0.10F 6.0 15.0 26.5 22.5 12 15 E3 0.15F 7.0 16.0 26.5 22.5 12 15 E3 0.22F 15 E3 0.33F 10.0 18.5 26.5 22.5 12 9.0 17.0 32.0 27.5 10 12 E3 0.33F 12 E3 0.47F 11.0 20.0 32.0 27.5 10 12 E3 0.68F 13.0 22.0 32.0 27.5 10 14.0 28.0 32.0 27.5 10 12 E3 1.0F 18.0 33.0 32.0 27.5 10 12 E3 1.5F 22.0 37.0 32.0 27.5 10 12 E3 2.2F 11.0 22.0 41.5 37.5 8 9.6 E3 1.0F 13.0 24.0 41.5 37.5 8 9.6 E3 1.5F 16.0 28.5 41.5 37.5 8 9.6 E3 2.2F 20.0 40.0 41.5 37.5 8 9.6 E3 3.3F 24.0 44.0 41.5 37.5 8 9.6 E3 4.7F Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) * 630Vdc/220Vac* Part Number R60472-630-FR60682-630-FR60103-630-FR60153-630-FR60223-630-FR60333-630-FR60473-630-FR60333-630-IR60473-630-IR60683-630-IR60104-630-IR60154-630-IR60104-630-NR60154-630-NR60224-630-NR60334-630-NR60334-630-RR60474-630-RR60684-630-RR60105-630-RR60155-630-RR60225-630-RR60105-630-WR60155-630-WR60225-630-WR60335-630-WR60475-630-W- Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors. If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. Rated voltages higher than 1000Vdc are available upon request. R60 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS SERIES CODE: R60 WOUND VERSION Rated Cap. Max Max K0 dv/dt B H L P (V/s) (V2/s) 4.0 9.0 13.0 10.0 60 120 E3 1000F 4.0 9.0 13.0 10.0 60 120 E3 1500F 4.0 9.0 13.0 10.0 60 120 E3 2200F 4.0 9.0 13.0 10.0 60 120 E3 3300F 5.0 11.0 13.0 10.0 60 120 E3 4700F 6.0 12.0 13.0 10.0 60 120 E3 6800F 60 E3 0.010F 5.0 11.0 18.0 15.0 30 60 E3 0.015F 6.0 12.0 18.0 15.0 30 60 E3 0.022F 7.5 13.5 18.0 15.0 30 60 E3 0.033F 8.5 14.5 18.0 15.0 30 60 E3 0.047F 10.0 16.0 18.0 15.0 30 30 E3 0.033F 6.0 15.0 26.5 22.5 15 30 E3 0.047F 6.0 15.0 26.5 22.5 15 30 E3 0.068F 8.5 17.0 26.5 22.5 15 30 E3 0.10F 10.0 18.5 26.5 22.5 15 9.0 17.0 32.0 27.5 12 24 E3 0.15F 24 E3 0.22F 11.0 20.0 32.0 27.5 12 24 E3 0.33F 13.0 22.0 32.0 27.5 12 24 E3 0.47F 14.0 28.0 32.0 27.5 12 24 E3 0.68F 18.0 33.0 32.0 27.5 12 22.0 37.0 32.0 27.5 12 24 E3 1.0F 20 E3 0.47F 11.0 22.0 41.5 37.5 10 20 E3 0.68F 13.0 24.0 41.5 37.5 10 16.0 28.5 41.5 37.5 10 20 E3 1.0F 20.0 40.0 41.5 37.5 10 20 E3 1.5F 24.0 44.0 41.5 37.5 10 20 E3 2.2F Tolerance: J ( 5%); K (10%); M (20%) Packaging code: B (bulk); A (ammo); R (reel) Lead length (mm): L (24-27); T (3.5-4.0); V (2.7-3.3) Omit for standard (4-6) 1000Vdc/250Vac* Part Number R60102-1000-FR60152-1000-FR60222-1000-FR60332-1000-FR60472-1000-FR60682-1000-FR60103-1000-IR60153-1000-IR60223-1000-IR60333-1000-IR60473-1000-IR60333-1000-NR60473-1000-NR60683-1000-NR60104-1000-NR60154-1000-RR60224-1000-RR60334-1000-RR60474-1000-RR60684-1000-RR60105-1000-RR60474-1000-WR60684-1000-WR60105-1000-WR60155-1000-WR60225-1000-W- All dimensions are in mm. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors. Note 1: Note 2: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage waveform and in any case it cannot exceed the value given in the above table. Rated voltages higher than 1000Vdc are available upon request. R60 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS SERIES CODE: R60 ELECTRICAL CHARACTERISTICS TEST METHOD AND PERFORMANCE Rated voltage (VR): 63Vdc -100Vdc - 160Vdc - 250Vdc 400Vdc - 630Vdc - 1000Vdc Rated temperature (TR): +85C Voltage derating vs. temperature: for temperatures between +85C and the upper operating temperature (+105C for wound technology and +125C for stacked technology) a decreasing factor of 1.25% per C on the rated voltage VR has to be applied. Capacitance range: Stacked: 1000F to 3.3F Wound: 1000F to 100F Capacitance values: E6 series (IEC 60063 Norm) Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M) Total self-inductance (L): (lead length ~2mm) Pitch (mm) L (nH) 10 9 15 10 22.5 18 27.5 18 37.5 22 Dissipation factor (DF): -4 tgx10 at +25C 5C KHz 1 10 C 1F 100 150 Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: C > 1F 100 Damp heat, steady state: Test conditions Temperature: Relative humidity (RH): Test duration: Performance Capacitance change (C/C): DF change (tg): Insulation resistance: Endurance: Test conditions Temperature: Test duration: Voltage applied: Performance Capacitance change (C/C): DF change (tg): +40C 2C 93% 2% 56 days 5% 50x10-4 at 1kHz 50% of initial limit +100C 2C 2000 h 1.25xVC 5% 50x10-4 at 10kHz for C 1F 30x10-4 at 01kHz for C> 1F Insulation resistance: 50% of initial limit Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen): 10 s 1 s Performance Capacitance change (C/C): 2% DF change (tg): 4 50x10- at 10kHz for C 1F 4 30x10- at 01kHz for C > 1F +25C 5C 1 min 50Vdc for VR <100Vdc 100Vdc for VR 100Vdc Performance For VR 100Vdc 3750 M for C 0.33F (50000 M)* 1250 s for C > 0.33F (5000 s)* For VR >100Vdc 30000 M for C 0.33F (50000 M)* 10000 s for C > 0.33F (17000 s)* *Typical value Test voltage between terminations: 1.6xVR applied for 2 s at +25C 5C Insulation resistance: initial limit Long term stability (after two years): Storage: standard environmental conditions see general information section. Performance Capacitance change (C/C): 3% for C 0.1F 2% for C > 0.1F RELIABILITY: Reference MIL HDB 217 Application conditions: Temperature: +40C 2C Voltage: 0.5xVR Failure rate: 5 FIT (1 FIT = 1x10-9 failures/componentsxh) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |C/C|: > 10% DF change (tg): > 2xinitial limit Insulation resistance: <0.005xinitial limit R60 NISSEI-ARCOTRONICS MKT Series METALLIZED POLYESTER FILM CAPACITOR MULTIPURPOSE APPLICATIONS SERIES CODE: R60 MAX. VOLTAGE (Vrms) VERSUS FREQUENCY (sinusoidal waveform / Th 40C) Note: p (pitch) in mm