ER60-105 - Vishay Presicion Group

Document Number: 13013 For technical questions, contact: esta@vishay.com www.vishay.com

Revision: 11-Aug-10 1

DC Filter Capacitors

Vishay ESTA

TYPE ER

Capacitors offer unusually good electrical characteristics,

coupled with very small size. The ER range of capacitors are

manufactured using a mixed dielectric material that consists

of polyester/polypropylene. The container is a rolled

seamed tinplate case that is hermetically sealed. The

construction is designed to prevent internal movement

when subjected to shock and vibration.

Note

• The impregnant used is a non toxic highly refined, purified and

inhibited mineral oil.

APPLICATIONS

The ER range of capacitors are specifically designed for DC

applications.

• Audio coupling

• Pulse forming networks

• Oscillator circuits

• Arc and spark suppression

•RF by-pass

• Tuned filters

• Energy storage

• Integrating circuits

• Low and high pass filters

• High voltage smoothing

Capacitors required for AC applications and high discharge

rates can also be designed from the ER range.

Consult Vishay Electronic GmbH, Division Roederstein

ESTA and Hybrids for your specific requirements.

TEMPERATURE RANGE

Temperature range is - 55 °C to + 85 °C. The nominal

voltage rating is applicable from - 55 °C to + 85 °C.

Derating is required for higher operating temperatures.

TEMPERATURE COEFFICIENT

Capacitance will increase by 2 % per 100 °C temperature

change.

RIPPLE

The sum of the peak ripple voltage and the DC voltage

should not exceed the rated voltage. Refer to graph fig. 1 for

permissible peak-to-peak ripple voltage as a percentage of

rated voltage for various frequencies.

Fig. 1

POWER FACTOR

The power factor is variable, and a function of temperature

and frequency. See fig 2. Nominal value < 0.5 % at 20 °C.

Fig. 2

DIELECTRIC RESISTANCE

(Parallel resistance) is indicated by the graph of insulance

(MΩ x μF) vs temperature fig 3. The insulance (MΩ x μF) is

nominally 10 000 s at + 20 °C. (Measurements taken after

1 minute with an applied voltage of 500 V).

Fig. 3

LIFE EXPECTANCY

ER type capacitors are designed for a life exceptancy of

50 000 h at 65 °C. To achieve the same life expectancy

at 85 °C derate to 60 % of rated voltage fig 4.

Fig. 4

10 100 1000

% RIPPLE

FREQUENCY Hz

10 000

2 %

0 %

1 %

- 20 0 40 65

1 kHz

50 Hz

Power Factor

vs.

Temperature

at 20 °C

- 40 0 40 80

MΩ x MF

102

103

104

105

Insulance vs. Temperature

Typical Values

50 100 150 °C

102

103

104

105

Rated Voltage

Hours

www.vishay.com For technical questions, contact: esta@vishay.com Document Number: 13013

2Revision: 11-Aug-10

Vishay ESTA DC Filter Capacitors

CAPACITANCE RANGE

0.01 μF to 100 μF. The tolerance is ± 10 %. Other tolerances

are available on request. Nominal values measured at 1 kHz.

VOLTAGE RANGE

1000 VDC to 40 000 VDC other values on request.

TEST VOLTAGE

Terminal/terminal (Vt/t)

For DC rating < 20 kV

Vt/t = 2.0 x rated voltage 60 s

For DC rating > 20 kV

Vt/t = 1.5 x rated voltage 60 s

WEIGHT

The approximate weight in kg of capacitors in the ER range

can be estimated by multiplying the volume of the capacitor

container by 1.45 (1) x 10 -6.

TERMINATIONS

Add suffix W to part No. To indicate wire terminations.

CAPACITANCE

Capacitance tolerance of 20 % is standard with those

marked (1).

FLASHOVER

Up to 5000 V rating, the capacitor terminals will withstand

125 % of the rated voltage without flashover at a pressure

of 85 mm Hg., equivalent to 50 000 feet altitude. Above

5000 V rating, the capacitor terminals will withstand 125 %

of the rated voltage at a pressure of 500 mg Hg, equivalent

to 10 000 feet altitude.

LIFE TESTS

Conducted at 85 °C for 500 h. The voltage applied will be

140 % of the rated voltage.

Fig. 5

E ± 1

A ± 1

1 mm

TYPE DESCRIPTION

PART NUMBER CAP.

μF ABCDE

1000 VDC WKG

ER10-104 0.1 50 48 28 20 20

ER10-504 0.5 50 48 28 20 20

ER10-105 1.0 75 48 28 20 20

ER10-405 4.0 75 60 54 25 35

ER10-605 6.0 95 60 54 25 35

ER10-106 10.0 115 80 48 40 35

ER10-256 25.0 155 85 67 40 35

ER10-506 50.0 155 130 100 50 35

1500 VDC WKG

ER15-104 0.1 60 48 28 20 20

ER15-504 0.5 60 48 28 20 20

ER15-205 2.0 75 54 48 22 35

ER15-405 4.0 115 54 48 22 35

ER15-805 8.0 95 85 67 40 35

ER15-106 10.0 115 85 67 40 35

ER15-126 12.0 135 85 67 40 35

ER15-256 25.0 115 130 100 50 35

ER15-506 50.0 180 130 100 50 35

2000 VDC WKG

ER20-104 0.1 60 48 28 20 20

ER20-254 0.25 60 48 28 20 20

ER20-504 0.5 60 48 28 20 20

ER20-105 1.0 95 48 28 20 20

ER20-205 2.0 75 54 48 22 35

ER20-405 4.0 115 54 48 22 35

ER20-605 6.0 135 60 54 25 35

ER20-106 10.0 115 85 67 40 35

ER20-126 12.0 135 85 67 40 35

ER20-206 20.0 115 130 100 50 35

3000 VDC WKG

ER30-104 0.1 60 48 28 20 20

ER30-504 0.5 75 48 28 20 20

ER30-105 1.0 115 48 28 20 20

ER30-105X 1.0 75 54 48 22 35

ER30-205 2.0 115 54 48 22 35

ER30-405 4.0 155 60 54 25 35

ER30-605 6.0 180 80 48 40 35

ER30-805 8.0 155 85 67 40 35

ER30-106 10.0 95 130 100 50 35

ER30-206 20.0 155 130 100 50 35

ER30-256 25.0 180 130 100 50 35

ER30-104 0.1 60 48 28 20 20

4000 VDC WKG

ER40-104 0.1 60 48 28 20 20

ER40-254 0.25 75 48 28 20 20

ER40-504 0.5 95 48 28 20 20

ER40-105 1.0 95 54 48 22 35

ER40-205 2.0 135 54 48 22 35

ER40-405 4.0 115 85 67 40 35

ER40-805 8.0 115 130 100 50 35

ER40-106 10.0 135 130 100 50 35

ER40-206 20.0 230 130 100 50 35

ER40-306 30.0 320 130 100 50 35

Document Number: 13013 For technical questions, contact: esta@vishay.com www.vishay.com

Revision: 11-Aug-10 3

DC Filter Capacitors Vishay ESTA

Note

(1) These capacitors are fitted with one high voltage terminal and case terminal. An additional terminal for connection to case is

available as an optional extra. Add suffix M to part number.

TYPE DESCRIPTION

PART NUMBER CAP.

μF ABCDE

5000 VDC WKG

ER50-104 0.1 60 48 28 20 20

ER50-254 0.25 75 48 28 20 20

ER50-105 1.0 115 54 48 22 35

ER50-405 4.0 155 85 67 40 35

ER50-805 8.0 135 130 100 50 35

ER50-106 10.0 155 130 100 50 35

ER50-206 20.0 290 130 100 50 35

ER50-506 50.0 295 180 180 75 35

6000 VDC WKG

ER60-104 0.1 65 54 48 (1) 35

ER60-254 0.25 80 54 48 (1) 35

ER60-504 0.5 100 80 48 40 35

ER60-105 1.0 100 85 67 40 35

ER60-205 2.0 100 130 100 50 35

ER60-405 4.0 135 130 100 50 35

ER60-605 6.0 180 130 100 50 35

ER60-805 8.0 250 130 100 50 35

ER60-106 10.0 290 130 100 50 35

ER60-126 12.0 345 130 100 50 35

ER60-206 20.0 180 220 164 125 60

8000 VDC WKG

ER80-503 0.05 58 60 54 (1) 60

ER80-104 0.1 65 60 54 (1) 60

ER80-254 0.25 85 60 54 (1) 60

ER80-504 0.5 140 60 54 (1) 60

ER80-105 1.0 120 85 67 40 60

ER80-205 2.0 120 130 100 50 60

ER80-405 4.0 200 130 100 50 60

ER80-605 6.0 270 130 100 50 60

ER80-805 8.0 345 130 100 50 60

ER80-156 15.0 280 180 180 75 60

10 000 VDC WKG

ER100-503 0.05 58 80 48 40 60

ER100-104 0.1 65 80 48 54 60

ER100-504 0.5 140 80 48 40 60

ER100-105 1.0 160 85 67 40 60

ER100-205 2.0 140 130 100 50 60

ER100-405 4.0 260 130 100 50 60

ER100-605 6.0 350 130 100 50 60

ER100-805 8.0 300 190 120 75 60

ER100-156 15.0 350 180 180 75 60

TYPE DESCRIPTION

PART NUMBER CAP.

μF ABCDE

12 000 VDC WKG

ER120-503 0.05 75 85 67 40 60

ER120-104 0.10 100 85 67 40 60

ER120-254 0.25 105 85 67 40 60

ER120-105 1.0 145 130 100 75 60

ER120-205 2.0 240 130 100 75 60

ER120-405 4.0 280 190 120 75 60

15 000 VDC WKG

ER150-103 0.01 60 60 54 (1) 60

ER150-203 0.02 60 60 54 (1) 60

ER150-503 0.05 85 60 54 (1) 60

ER150-104 0.10 105 80 48 (1) 60

ER150-254 0.25 125 85 67 40 60

ER150-504 0.50 190 85 67 40 60

ER150-504X 0.50 105 130 100 75 60

ER150-105 1.0 160 130 100 75 60

ER150-205 2.0 190 159 120 75 60

20 000 VDC WKG

ER200-103 0.01 70 80 48 (1) 60

ER200-503X 0.05 85 85 67 40 60

ER200-104 0.1 105 85 67 40 60

ER200-254 0.25 190 85 67 40 60

ER200-504 0.5 160 130 100 75 60

ER200-105 1.0 300 130 100 75 60

ER200-205 2.0 250 180 180 90 100

ER200-405 4.0 305 240 180 100 100

25 000 VDC WKG

ER250-503 0.05 110 85 67 (1) 70

ER250-104X 0.1 95 130 100 65 70

ER250-254 0.25 130 130 100 65 70

ER250-504 0.5 250 130 100 65 70

30 000 VDC WKG

ER300-303 0.03 120 85 67 (1) 70

ER300-104 0.1 200 85 67 (1) 70

ER300-104X 0.1 120 130 100 65 70

ER300-504 0.5 315 130 100 65 70

ER300-105 1.0 295 180 180 75 100

40 000 VDC WKG

ER400-303 0.03 160 85 67 (1) 70

ER400-503 0.05 210 85 67 (1) 70

ER400-503X 0.05 125 130 100 65 70

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.