TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com ADVANCED LinCMOSTM RAIL-TO-RAIL OPERATIONAL AMPLIFIERS Check for Samples: TLC2272-Q1 , TLC2272A-Q1 , TLC2274-Q1, TLC2274A-Q1 FEATURES 1 * * * * * 2 * Qualified for Automotive Applications Output Swing Includes Both Supply Rails Low Noise . . . 9 nV/Hz Typ at f = 1 kHz Low Input Bias Current . . . 1 pA Typ Fully Specified for Both Single-Supply and Split-Supply Operation Common-Mode Input Voltage Range Includes Negative Rail * * * * * High-Gain Bandwidth . . . 2.2 MHz Typ High Slew Rate . . . 3.6 V/s Typ Low Input Offset Voltage 950 V Max at TA = 25C Macromodel Included Performance Upgrades for the TS272, TS274, TLC272, and TLC274 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/s of slew rate for higher speed applications. These devices offer comparable ac performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/Hz, two times lower than competitive solutions. The TLC227x, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 V. This family is fully characterized at 5 V and 5 V. V(OPP) V O(PP) - Maximum Peak-to-Peak Output Voltage - V DESCRIPTION 16 TA = 25C 14 12 IO = 50 A 10 IO = 500 A 8 6 4 4 6 10 12 8 |VDD | - Supply Voltage - V 14 16 The TLC2272/4 also makes great upgrades to the TLC272/4 or TS272/4 in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. ADVANCED LinCMOS is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2003-2012, Texas Instruments Incorporated TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. AVAILABLE OPTIONS TA VIOmax At 25C -40C to 125C -40C to 125C (1) (2) PACKAGED DEVICES (1) (2) SMALL OUTLINE (D) TSSOP (PW) 950 V TLC2272AQDRQ1 TLC2272AQPWRQ1 2.5 mV TLC2272QDRQ1 TLC2272QPWRQ1 950 V TLC2274AQDRQ1 TLC2274AQPWRQ1 2.5 mV TLC2274QDRQ1 TLC2274QPWRQ1 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. Equivalent Schematic (Each Amplifier) VDD + Q3 Q6 Q9 Q12 Q14 Q16 IN + OUT C1 IN - R5 Q1 Q4 Q13 Q15 Q17 D1 Q2 Q5 R3 R4 Q7 Q8 Q10 Q11 R1 R2 VDD- 2 Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Actual Device Component Count (1) COMPONENT TLC2272 TLC2274 Transistors 38 76 Resistors 26 52 Diodes 9 18 Capacitors 3 6 (1) Includes both amplifiers and all ESD, bias, and trim circuitry ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) (2) VALUE UNIT VDD+ Supply voltage 8 V VDD- Supply voltage (2) -8 V VID Differential input voltage (3) 16 V (2) Any input VDD- - 0.3 to VDD+ V Any input 5 mA Output current 50 mA Total current into VDD+ 50 mA 50 mA VI Input voltage range II Input current IO Total current out of VDD- Duration of short-circuit current at (or below) 25C (4) unlimited Continuous total dissipation See Dissipation Ratings TA Operating free-air temperature range Tstg Storage temperature range Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds (1) (2) (3) (4) -40C to 125C C -65 to 150 C 260 C D or PW package Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, except differential voltages, are with respect to the midpoint between VDD+ and VDD -. Differential voltages are at IN+ with respect to IN -. Excessive current will flow if input is brought below VDD- - 0.3 V. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATINGS PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 85C POWER RATING TA = 125C POWER RATING D-8 725 mW 5.8 mW/C 464 mW 337 mW 145 mW D-14 950 mW 7.6 mW/C 608 mW 494 mW 190 mW D-14 525 mW 4.2 mW/C 336 mW 273 mW 105 mW D-14 700 mW 5.6 mW/C 448 mW 364 mW - RECOMMENDED OPERATING CONDITIONS over operating free-air temperature range (unless otherwise noted) MIN MAX VDD Supply voltage 2.2 8 V VI Input voltage VDD- VDD+ -1.5 V VIC Common-mode input voltage VDD- VDD+ -1.5 V TA Operating free-air temperature -40 125 C Copyright (c) 2003-2012, Texas Instruments Incorporated UNIT Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 3 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2272Q ELECTRICAL CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage TEST CONDITIONS Input offset current IIB Input bias current VICR Common-mode input voltage range 25C VIC = 0 V, VO = 0 V, VDD = 2.5 V, RS = 50 300 RS = 50 VIC = 2.5 V, 0.002 0.002 V/m o 25C 0.5 60 0.5 800 VIC = 2.5 V, VO = 1 V to 4 V, IOL = 5 mA RL = 10 k (3) RL = 1 M (3) 60 800 1 1 60 800 0 to 4 -0.3 to 4.2 0 to 4 4.99 25C 4.85 Full range 4.85 25C 4.25 Full range 4.25 -0.3 to 4.2 4.85 4.93 4.85 4.65 4.25 V 4.65 4.25 0.01 25C 0.09 Full range 0.01 0.15 0.09 0.15 0.9 Full range 10 Full range 10 35 0.15 0.15 1.5 0.9 1.5 25C pA 4.99 4.93 25C 25C pA V 0 to 3.5 0 to 3.5 25C IOL = 500 A V 25C Full range IOL = 50 A 950 1600 UNIT V/C |VIO| 5 mV IOH = -200 A MAX 2 25C VIC = 2.5 V, Large-signal differential voltage amplification 2500 TYP 2 25C VIC = 2.5 V, AVD 300 MIN Full range IOH = -1 mA Low-level output voltage MAX Full range High-level output voltage VOL TLC2272AQ TYP 3000 25C to 125C IOH = -20 A VOH TLC2272Q MIN Full range Input offset voltage long-term drift (2) IIO TA (1) V 1.5 1.5 10 35 10 V/mV 25C 175 175 rid Differential input resistance 25C 1012 1012 ri Common-mode input resistance 25C 1012 1012 ci Common-mode input capacitance f = 10 kHz, P package 25C 8 8 pF zo Closed-loop output impedance f = 1 MHz, AV = 10 25C 140 140 CMR R Common-mode rejection ratio VIC = 0 V to 2.7 V, VO = 2.5 V, RS = 50 25C 70 Full range 70 kSVR Supply voltage rejection ratio (VDD/VIO) VDD = 4.4 V to 16 V, 25C 80 VIC = VDD/2, No load Full range 80 IDD Supply current VO = 2.5 V, No load (1) (2) (3) 4 25C Full range 75 70 75 dB 70 95 80 95 dB 80 2.2 3 3 2.2 3 3 mA Full range is -40C to 125C for Q level part. Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. Referenced to 2.5 V Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2272Q OPERATING CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TA (1) TEST CONDITIONS VO =1.25 V to 2.75 V, RL = 10 k (2) CL = 100 pF (2) TLC2272Q MIN TYP 25C 2.3 3.6 Full range 1.7 TLC2272AQ MAX MIN TYP 2.3 3.6 MAX UNIT SR Slew rate at unity gain Vn Equivalent input noise voltage f = 10 Hz 25C 50 50 f = 1 kHz 25C 9 9 VN(pp) Peak-to-peak equivalent input noise voltage f = 0.1 to 1 Hz 25C 1 1 f = 0.1 to 10 Hz 25C 1.4 1.4 In Equivalent input noise current 25C 0.6 0.6 THD +N Total harmonic distortion plus noise 0.0013 % 0.0013 % 0.004% 0.004% 0.03% 0.03% 25C 2.18 2.18 MHz 25C 1 1 MHz 1.5 1.5 2.6 2.6 25C 50 50 25C 10 10 VO = 0.5V to 2.5V, RL = 10 k, f = 20 kHz (2) AV = 1 25C AV = 10 AV = 100 f = 10 kHz, CL = 100 pF (2) RL = 10 k Maximum output-swing bandwidth VO(PP) = 2V, RL = 10 k (2) AV = 1, CL = 100 pF (2) To 0.1% ts Settling time AV = -1, Step = 0.5V to 2.5V, RL = 10 k (3) CL = 100 pF (3) m Phase margin at unity gain RL = 10 k (3), CL = 100 pF (3) To 0.01% Gain margin (1) (2) (3) nV/ Hz V fA/H z (2) Gain-bandwidth product BOM V/s 1.7 25C s dB Full range is -40C to 125C for Q level part. Referenced to 2.5 V Referenced to 2.5 V Copyright (c) 2003-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 5 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2272Q ELECTRICAL CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (2) TEST CONDITIONS 25C VIC = 0 V, RS = 50 IIB Input bias current VICR Common-mode input RS = 50 voltage range VO = 0 V Large-signal differential voltage amplification 0.002 V/m o 25C 0.5 25C Full range 60 0.5 800 1 -5 to 4 60 -5.3 to 4.2 1 4.85 Full range 4.85 25C 4.25 Full range 4.25 VIC = 0 V, 25C -4.85 Full range -4.85 25C -3.5 Full range -3.5 20 Full range 20 pA V 4.99 4.93 4.85 4.93 4.85 4.65 4.25 V 4.65 4.25 -4.99 25C -5.3 to 4.2 pA -5 to 3.5 4.99 25C 60 800 -5 to 4 -5 to 3.5 60 800 800 IO = 500 A RL = 1 M V 0.002 25C RL = 10 k 950 1500 UNIT 25C IO = 50 A VO = 4 V, 300 MAX V/C VIC = 0 V, IO = 5 mA TYP 2 25C IO = -200 A VIC = 0 V, AVD 2500 MIN 2 25C IO = -1 mA Maximum negative peak output voltage 300 Full range IO = -20 A VOM- MAX Full range |VIO| 5 mV TLC2272AQ TYP 3000 25C to 125C Input offset current Maximum positive peak output voltage TLC2272Q MIN Full range IIO VOM+ TA (1) -4.99 -4.91 -4.85 -4.91 -4.85 -4.1 -3.5 V -4.1 -3.5 50 20 50 20 V/mV 25C 300 300 rid Differential input resistance 25C 1012 1012 ri Common-mode input resistance 25C 1012 1012 ci Common-mode input f = 10 kHz, capacitance N package 25C 8 8 pF zo Closed-loop output impedance f = 1 MHz, AV = 10 25C 130 130 CMR R Common-mode rejection ratio VIC = -5 V to 2.7 V, VO = 0 V, RS = 50 Supply voltage rejection ratio (VDD/VIO) VDD = 2.2 V to 8 V, kSVR VIC = 0V, No load IDD Supply current VO = 0 V, No load (1) (2) 6 25C 75 Full range 75 25C 80 Full range 80 25C Full range 80 75 80 dB 75 95 80 95 dB 80 2.4 3 3 2.4 3 3 mA Full range is -40C to 125C for Q level part. Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2272Q OPERATING CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA (1) TLC2272Q MIN TYP 25C 2.3 3.6 Full range 1.7 TLC2272AQ MAX MIN TYP 2.3 3.6 MAX UNIT SR Slew rate at unity gain VO = 2.3 V, RL = 10 k Vn Equivalent input noise voltage f = 10 Hz 25C 50 50 f = 1 kHz 25C 9 9 Peak-to-peak equivalent input noise voltage f = 0.1 to 1 Hz 25C 1 1 VN(pp) f = 0.1 to 10 Hz 25C 1.4 1.4 In Equivalent input noise current 25C 0.6 0.6 0.0011% 0.0011% THD +N Total harmonic distortion plus noise 0.004% 0.004% 0.03% 0.03% 25C 2.25 2.25 MHz 25C 0.54 0.54 MHz 1.5 1.5 3.2 3.2 25C 52 52 25C 10 10 BOM AV = 1 AV = 10 f = 10 kHz, CL = 100 pF RL = 10 k Maximum output-swing bandwidth VO(PP) = 4.6 V, RL = 10 k AV = 1, CL = 100 pF AV = -1, Step = -2.3 V to 2.3 V, RL = 10 k CL = 100 pF To 0.1% Settling time m Phase margin at unity gain Gain margin RL = 10 k, 25C AV = 100 Gain-bandwidth product ts (1) VO = 2.3 V, f = 20 kHz, RL = 10 k CL = 100 pF To 0.01% CL = 100 pF 25C 1.7 V/s nV/H z V fA/H z s dB Full range is -40C to 125C for Q level part. Copyright (c) 2003-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 7 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2274Q ELECTRICAL CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS Input offset voltage VIO Temperature coefficient of input offset voltage IIB Input bias current VICR Common-mode input voltage range VDD = 2.5 V, RS = 50 RS = 50 0.002 0.002 V/m o 25C 0.5 60 0.5 800 VIC = 2.5 V, VIC = 2.5 V, VO = 1 V to 4 V, IOL = 500 A IOL = 5 mA RL = 10 k (3) RL = 1 M (3) 60 800 1 1 60 800 0 to 4 -0.3 to 4.2 0 to 4 4.99 25C 4.85 Full range 4.85 25C 4.25 Full range 4.25 -0.3 to 4.2 4.85 4.93 4.85 4.65 4.25 V 4.65 4.25 0.01 25C 0.09 Full range 0.01 0.15 0.09 0.15 0.9 Full range 10 Full range 10 35 0.15 0.15 1.5 0.9 1.5 25C pA 4.99 4.93 25C 25C pA V 0 to 3.5 0 to 3.5 25C IOL = 50 A V 25C |VIO| 5 mV IOH = -200 A 950 1600 UNIT V/C Full range VIC = 2.5 V, Large-signal differential voltage amplification 300 MAX 2 25C VIC = 2.5 V, AVD TYP 2 25C IOH = -1 mA Low-level output voltage 2500 MIN Full range High-level output voltage VOL 300 Full range IOH = -20 A VOH MAX 3000 25C to 125C VIC = 0 V, VO = 0 V, TLC2274AQ TYP Full range Input offset voltage long-term drift (2) Input offset current TLC2274Q MIN 25C VIO IIO TA (1) V 1.5 1.5 10 35 10 V/mV 25C 175 175 rid Differential input resistance 25C 1012 1012 ri Common-mode input resistance 25C 1012 1012 ci Common-mode input capacitance f = 10 kHz, N package 25C 8 8 pF zo Closed-loop output impedance f = 1 MHz, AV = 10 25C 140 140 CMR R Common-mode rejection ratio VIC = 0 V to 2.7 V, VO = 2.5 V, RS = 50 25C 70 Full range 70 kSVR Supply voltage rejection ratio (VDD/VIO) VDD = 4.4 V to 16 V, 25C 80 VIC = VDD/2, No load Full range 80 IDD Supply current VO = 2.5 V, No load (1) (2) (3) 8 25C Full range 75 70 75 dB 70 95 80 95 dB 80 4.4 6 6 4.4 6 6 mA Full range is -40C to 125C for Q level part. Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. Referenced to 2.5 V Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2274Q OPERATING CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TA (1) TEST CONDITIONS VO = 0.5 V to 2.5 V, RL = 10 k (2) CL = 100 pF (2) TLC2274Q MIN TYP 25C 2.3 3.6 Full range 1.7 TLC2274AQ MAX MIN TYP 2.3 3.6 MAX UNIT SR Slew rate at unity gain Vn Equivalent input noise voltage f = 10 Hz 25C 50 50 f = 1 kHz 25C 9 9 VN(pp) Peak-to-peak equivalent input noise voltage f = 0.1 to 1 Hz 25C 1 1 f = 0.1 to 10 Hz 25C 1.4 1.4 In Equivalent input noise current 25C 0.6 0.6 THD +N Total harmonic distortion plus noise 0.0013 % 0.0013 % 0.004% 0.004% 0.03% 0.03% 25C 2.18 2.18 MHz 25C 1 1 MHz 1.5 1.5 2.6 2.6 25C 50 50 25C 10 10 VO = 0.5V to 2.5V, RL = 10 k, f = 20 kHz (2) AV = 1 25C AV = 10 AV = 100 f = 10 kHz, CL = 100 pF (2) RL = 10 k Maximum output-swing bandwidth VO(PP) = 2V, RL = 10 k (2) AV = 1, CL = 100 pF (2) To 0.1% ts Settling time AV = -1, Step = 0.5V to 2.5V, RL = 10 k (3) CL = 100 pF (3) m Phase margin at unity gain RL = 10 k (3), CL = 100 pF (3) Gain margin (1) (2) (3) nV/ Hz V fA/H z (2) Gain-bandwidth product BOM V/s 1.7 To 0.01% 25C s dB Full range is -40C to 125C for Q level part. Referenced to 2.5 V Referenced to 2.5 V Copyright (c) 2003-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 9 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2274Q ELECTRICAL CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (2) TEST CONDITIONS 25C VIC = 0 V, RS = 50 IIB Input bias current VICR Common-mode input RS = 50 voltage range VO = 0 V Large-signal differential voltage amplification 0.002 V/m o 25C 0.5 25C Full range 60 0.5 800 1 -5 to 4 60 -5.3 to 4.2 1 4.85 Full range 4.85 25C 4.25 Full range 4.25 VIC = 0 V, 25C -4.85 Full range -4.85 25C -3.5 Full range -3.5 20 Full range 20 pA V 4.99 4.93 4.85 4.93 4.85 4.65 4.25 V 4.65 4.25 -4.99 25C -5.3 to 4.2 pA -5 to 3.5 4.99 25C 60 800 -5 to 4 -5 to 3.5 60 800 800 IO = 500 A RL = 1 M V 0.002 25C RL = 10 k 950 1500 UNIT 25C IO = 50 A VO = 4 V, 300 MAX V/C VIC = 0 V, IO = 5 mA TYP 2 25C IO = -200 A VIC = 0 V, AVD 2500 MIN 2 25C IO = -1 mA Maximum negative peak output voltage 300 Full range IO = -20 A VOM- MAX Full range |VIO| 5 mV TLC2274AQ TYP 3000 25C to 125C Input offset current Maximum positive peak output voltage TLC2274Q MIN Full range IIO VOM+ TA (1) -4.99 -4.91 -4.85 -4.91 -4.85 -4.1 -3.5 V -4.1 -3.5 50 20 50 20 V/mV 25C 300 300 rid Differential input resistance 25C 1012 1012 ri Common-mode input resistance 25C 1012 1012 ci Common-mode input f = 10 kHz, capacitance N package 25C 8 8 pF zo Closed-loop output impedance f = 1 MHz, AV = 10 25C 130 130 CMR R Common-mode rejection ratio VIC = -5 V to 2.7 V, VO = 0 V, RS = 50 Supply voltage rejection ratio (VDD/VIO) VDD = 2.2 V to 8 V, kSVR VIC = 0V, No load IDD Supply current VO = 0 V, No load (1) (2) 10 25C 75 Full range 75 25C 80 Full range 80 25C Full range 80 75 80 dB 75 95 80 95 dB 80 4.4 6 6 4.4 6 6 mA Full range is -40C to 125C for Q level part. Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TLC2274Q OPERATING CHARACTERISTICS at specified free-air temperature, VDD = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA (1) TLC2274Q MIN TYP 25C 2.3 3.6 Full range 1.7 TLC2274AQ MAX MIN TYP 2.3 3.6 MAX UNIT SR Slew rate at unity gain VO = 2.3 V, RL = 10 k Vn Equivalent input noise voltage f = 10 Hz 25C 50 50 f = 1 kHz 25C 9 9 Peak-to-peak equivalent input noise voltage f = 0.1 to 1 Hz 25C 1 1 VN(pp) f = 0.1 to 10 Hz 25C 1.4 1.4 In Equivalent input noise current 25C 0.6 0.6 0.0011% 0.0011% THD +N Total harmonic distortion plus noise 0.004% 0.004% 0.03% 0.03% 25C 2.25 2.25 MHz 25C 0.54 0.54 MHz 1.5 1.5 3.2 3.2 25C 52 52 25C 10 10 BOM AV = 1 AV = 10 f = 10 kHz, CL = 100 pF RL = 10 k Maximum output-swing bandwidth VO(PP) = 4.6 V, RL = 10 k AV = 1, CL = 100 pF AV = -1, Step = -2.3 V to 2.3 V, RL = 10 k CL = 100 pF To 0.1% Settling time m Phase margin at unity gain Gain margin RL = 10 k, 25C AV = 100 Gain-bandwidth product ts (1) VO = 2.3 V, f = 20 kHz, RL = 10 k CL = 100 pF To 0.01% CL = 100 pF 25C 1.7 V/s nV/H z V fA/H z s dB Full range is -40C to 125C for Q level part. Copyright (c) 2003-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 11 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com TYPICAL CHARACTERISTICS Table of Graphs (1) FIGURE VIO VIO IIB /IIO Figure 1, Figure 2, Figure 3, Figure 4, Figure 5, Figure 6 Input offset voltage Distribution vs Common-mode voltage Input offset voltage temperature coefficient Distribution Input bias and input offset current vs Free-air temperature Figure 11 vs Supply voltage Figure 12 vs Free-air temperature Figure 13 Figure 7,Figure 8, Figure 9, Figure 10 VI Input voltage VOH High-level output voltage vs High-level output current Figure 14 VOL Low-level output voltage vs Low-level output current Figure 15, Figure 16 VOM + Maximum positive peak output voltage vs Output current Figure 17 VOM - Maximum negative peak output voltage vs Output current Figure 18 VO(PP) Maximum peak-to-peak output voltage vs Frequency Figure 19 vs Supply voltage Figure 20 vs Free-air temperature Figure 21 IOS Short-circuit output current VO Output voltage vs Differential input voltage AVD Large-signal differential voltage amplification vs Load resistance Large-signal differential voltage amplification and phase margin vs Frequency Large-signal differential voltage amplification vs Free-air temperature Figure 27, Figure 28 Output impedance vs Frequency Figure 29, Figure 30 vs Frequency Figure 31 zo CMRR Common-mode rejection ratio kSVR Supply-voltage rejection ratio IDD Supply current SR VO Figure 24 Figure 25, Figure 26 vs Free-air temperature vs Frequency vs Free-air temperature Figure 36, Figure 37 vs Free-air temperature Figure 38, Figure 39 vs Free-air temperature Voltage-follower large-signal pulse response Figure 44, Figure 45 Inverting small-signal pulse response Figure 46, Figure 47 Figure 48, Figure 49 vs Frequency Figure 50, Figure 51 12 Figure 52 Integrated noise voltage vs Frequency Figure 53 Total harmonic distortion plus noise vs Frequency Figure 54 vs Supply voltage Figure 55 Gain bandwidth product Gain-bandwidth product (1) Figure 41 Figure 42, Figure 43 Noise voltage over a 10-second period m Figure 40 Inverting large-signal pulse response Equivalent input noise voltage THD + N Figure 35 vs Supply voltage Voltage-follower small-signal pulse response Vn Figure 32 Figure 33, Figure 34 vs Load capacitance Slew rate Figure 22, Figure 23 vs Free-air temperature Figure 56 Phase margin vs Load capacitance Figure 57 Gain margin vs Load capacitance Figure 58 For all graphs where VDD = 5 V, all loads are referenced to 2.5 V. Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. DISTRIBUTION OF TLC2272 INPUT OFFSET VOLTAGE DISTRIBUTION OF TLC2272 INPUT OFFSET VOLTAGE Figure 1. Figure 2. DISTRIBUTION OF TLC2274 INPUT OFFSET VOLTAGE DISTRIBUTION OF TLC2274A INPUT OFFSET VOLTAGE 20 20 992 Amplifiers From 2 Wafer Lots VDD = 5 V Percentage of Amplifiers - % Percentage of Amplifiers - % 992 Amplifiers From 2 Wafer Lots VDD = 2.5 V 15 10 5 0 -1.6 -1.2 -0.8 -0.4 0 0.4 0.8 VIO - Input Offset V oltage - mV Figure 3. Copyright (c) 2003-2012, Texas Instruments Incorporated 1.2 1.6 15 10 5 0 -1.6 -1.2 -0.8 -0.4 0 0.4 0.8 1.2 1.6 VIO - Input Offset V oltage - mV Figure 4. Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 13 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. INPUT OFFSET VOLTAGE vs COMMON-MODE VOLTAGE INPUT OFFSET VOLTAGE vs COMMON-MODE VOLTAGE 1 VDD = 5 V TA = 25C RS = 50 VIO - Input Offset V oltage - mV VIO VIO V IO - Input Offset V oltage - mV 1 0.5 0 -0.5 -1 -1 0 1 2 3 4 5 VIC - Common-Mode V oltage - V 14 VDD = 5 V TA = 25C RS = 50 0.5 0 -0.5 -1 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 VIC - Common-Mode V oltage - V Figure 5. Figure 6. DISTRIBUTION OF TLC2272 vs INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT DISTRIBUTION OF TLC2272 vs INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT Figure 7. Figure 8. Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. DISTRIBUTION OF TLC2274A vs INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT DISTRIBUTION OF TLC2274A vs INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT 25 25 128 Amplifiers From 2 Wafer Lots VDD = 2.5 V N Package TA = 25C to 125C 20 Percentage of Amplifiers - % Percentage of Amplifiers - % 20 15 10 5 0 -5 128 Amplifiers From 2 Wafer Lots VDD = 2.5 V N Package TA = 25C to 125C 15 10 5 0 -4 -3 -2 -1 0 1 2 3 4 5 -5 -4 -3 -2 -1 0 1 2 3 4 5 VIO - Temperature Coefficient - V/C Figure 9. Figure 10. INPUT BIAS AND INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE INPUT VOLTAGE vs SUPPLY VOLTAGE 35 12 VDD = 2.5 V VIC = 0 V VO = 0 V RS = 50 30 TA = 25C RS = 50 10 8 6 25 20 IIB 15 IIO 10 V I - Input Voltage - V I IO - Input Bias and Input Offset Currents - pA IIIB IB and IIO VIO - Temperature Coefficient - V/C 4 2 |VIO| 5 mV 0 -2 -4 -6 5 -8 0 - 10 25 45 65 85 105 TA - Free-Air Temperature - C Figure 11. Copyright (c) 2003-2012, Texas Instruments Incorporated 125 2 3 4 5 6 7 |VDD | - Supply Voltage - V 8 Figure 12. Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 15 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. INPUT VOLTAGE vs FREE-AIR TEMPERATURE HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 5 6 VDD = 5 V VDD = 5 V VV0H OH - High-Level Output V oltage - V V I - Input Voltage - V 4 3 |VIO| 5mV 2 1 0 -1 -75 - 50 5 4 TA = 125C 3 TA = 25C 2 TA = -55C 1 0 - 25 0 25 50 75 100 125 0 TA - Free-Air Temperature - C 3 Figure 14. LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 1.4 VOL VOL - Low-Level Output V oltage - V VDD = 5 V TA = 25C VOL VOL - Low-Level Output V oltage - V 2 Figure 13. 1.2 1 VIC = 0 V 0.8 VIC = 1.25 V 0.6 0.4 VIC = 2.5 V 0.2 4 VDD = 5 V VIC = 2.5 V 1.2 1 TA = 125C 0.8 TA = 25C 0.6 TA = -55C 0.4 0.2 0 0 0 1 2 3 4 IOL - Low-Level Output Current - mA Figure 15. 16 1 IOH - High-Level Output Current - mA Submit Documentation Feedback 5 0 5 1 2 3 4 IOL - Low-Level Output Current - mA 6 Figure 16. Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT V OM - - Maximum Negative Peak Output V oltage - V V OM + - Maximum Positive Peak Output V oltage - V 5 VDD = 5 V 4 TA = -55C TA = 25C 3 TA = 125C 2 1 0 1 2 3 4 |IO| - Output Current - mA -3.8 VDD = 5 V VIC = 0 V -4 TA = 125C -4.2 TA = 25C -4.4 TA = -55C -4.6 -4.8 -5 0 5 1 2 3 4 IO - Output Current - mA 5 Figure 17. Figure 18. MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE RL = 10 k TA = 25C 9 VID = -100 mV 8 7 6 5 VDD = 5 V 4 VDD = 5 V 3 2 1 12 8 4 0 VID = 100 mV -4 VO = 0 V TA = 25C -8 0 10 k 6 16 10 IIOS OS - Short-Circuit Output Current - mA V V(OPP) O(PP) - Maximum Peak-to-Peak Output V oltage - V MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT 100 k 1M f - Frequency - Hz Figure 19. Copyright (c) 2003-2012, Texas Instruments Incorporated 10 M 2 3 4 5 6 7 |VDD | - Supply Voltage - V 8 Figure 20. Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 17 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE VDD = 5 V TA = 25C RL = 10 k VIC = 2.5 V VID = -100 mV 11 VO - Output V oltage - V 4 7 -3 -1 5 3 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C 3 2 1 VID = 100 mV -5 -75 VO - Output V oltage - V 5 VO = 0 V VDD = 5 V 0 -800 125 800 -400 0 400 VID - Differential Input V oltage - V Figure 21. Figure 22. OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE 1200 1000 VDD = 5 V TA = 25C RL = 10 k VIC = 0 V VO = 1 V TA = 25C AVD A VD - Large-Signal Differential Voltage Amplification - dB IIOS OS - Short-Circuit Output Current - mA 15 OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE 1 -1 100 VDD = 5 V 10 VDD = 5 V 1 -3 -5 0 250 500 750 1000 -1000 -750 -500 -250 VID - Differential Input V oltage - V Figure 23. 18 Submit Documentation Feedback 0.1 0.1 1 10 RL - Load Resistance - k 100 Figure 24. Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. AVD A VD - Large-Signal Differential Voltage Amplification - dB 60 180 80 135 60 40 90 20 45 0 0 -20 -45 -40 1k 10 k 100 k 1M f - Frequency - Hz -90 10 M AVD A VD - Large-Signal Differential Voltage Amplification - dB VDD = 5 V RL = 10 k CL = 100 pF TA = 25C om m - Phase Margin 80 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY 90 20 45 0 0 -20 -45 -40 1k 10 k 100 k 1M f - Frequency - Hz -90 10 M Figure 25. Figure 26. LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE 1k VDD = 5 V VIC = 0 V VO = 4 V AVD A VD - Large-Signal Differential Voltage Amplification - V/mV VDD = 5 V VIC = 2.5 V VO = 1 V to 4 V AVD A VD - Large-Signal Differential Voltage Amplification - V/mV 135 40 1k RL = 1 M 100 RL = 10 k 10 -75 180 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C om m - Phase Margin LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 27. Copyright (c) 2003-2012, Texas Instruments Incorporated 125 RL = 1 M 100 RL = 10 k 10 -75 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 28. Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 19 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. OUTPUT IMPEDANCE vs FREQUENCY OUTPUT IMPEDANCE vs FREQUENCY 1000 1000 VDD = 5 V TA = 25C zo - Output Impedance - W 100 AV = 100 10 AV = 10 1 AV = 1 0.1 100 1k 10 k 100 k CMRR - Common-Mode Rejection Ratio - dB AV = 10 1 1k 10 k 100 k 1M f - Frequency - Hz Figure 29. Figure 30. COMMON-MODE REJECTION RATIO vs FREQUENCY COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE 90 VDD = 5 V 80 VDD = 5 V 60 40 20 100 1k 10 k 100 k f - Frequency - Hz Figure 31. 20 10 0.1 100 1M TA = 25C 10 AV = 100 f - Frequency - Hz 100 0 100 AV = 1 CMRR - Common-Mode Rejection Ratio - dB zo - Output Impedance - W VDD = 5 V TA = 25C Submit Documentation Feedback 1M 10 M 86 82 VDD = 5 V VIC = -5 V to 2.7 V 78 VDD = 5 V 74 70 -75 VIC = 0 V to 2.7 V -50 -25 0 25 50 75 100 125 TA - Free-Air Temperature - C Figure 32. Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY 100 VDD = 5 V TA = 25C kkSVR SVR - Supply-V oltage Rejection Ratio - dB kkSVR SVR - Supply-V oltage Rejection Ratio - dB 100 80 60 k SVR+ 40 k SVR - 20 0 -20 10 100 1k 10 k 100 k 1M 10 M VDD = 5 V TA = 25C 80 60 k SVR+ 40 k SVR - 20 0 -20 10 100 1k 10 k 100 k 1M f - Frequency - Hz f - Frequency - Hz Figure 33. Figure 34. SUPPLY-VOLTAGE REJECTION RATIO vs FREE-AIR TEMPERATURE TLC2272 SUPPLY CURRENT vs SUPPLY VOLTAGE 10 M kkSVR SVR - Supply V oltage Rejection Ratio - dB 110 VDD = 2.2 V to 8 V VO = 0 V 105 100 95 90 85 -75 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 35. Copyright (c) 2003-2012, Texas Instruments Incorporated 125 Figure 36. Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 21 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. TLC2274A SUPPLY CURRENT vs SUPPLY VOLTAGE TLC2272 SUPPLY CURRENT vs FREE-AIR TEMPERATURE 6 IIDD DD - Supply Current - mA VO = 0 V No Load 4.8 3.6 TA = 25C TA = -55C 2.4 TA = 125C 1.2 0 0 1 2 3 4 5 6 |VDD | - Supply Voltage - V 7 8 Figure 37. Figure 38. TLC2274A SUPPLY CURRENT vs FREE-AIR TEMPERATURE SLEW RATE vs LOAD CAPACITANCE 6 5 VDD = 5 V AV = -1 TA = 25C VDD = 5 V VO = 0 V 4 SR - Slew Rate - V/ s IIDD DD - Supply Current - mA 4.8 VDD = 5 V VO = 2.5 V 3.6 2.4 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 39. 22 3 2 SR + 1 1.2 0 -75 SR - Submit Documentation Feedback 125 0 10 100 1k CL - Load Capacitance - pF 10 k Figure 40. Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. SLEW RATE vs FREE-AIR TEMPERATURE INVERTING LARGE-SIGNAL PULSE RESPONSE 5 5 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C AV = -1 SR - 4 V VO O - Output V oltage - mV SR + 3 2 VDD = 5 V RL = 10 k CL = 100 pF AV = 1 1 0 -75 -50 -25 0 25 50 75 2 0 125 0 1 2 3 4 5 6 7 8 TA - Free-Air Temperature - C t - Time - s Figure 41. Figure 42. INVERTING LARGE-SIGNAL PULSE RESPONSE VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 5 3 9 5 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C AV = -1 4 V VO O - Output V oltage - V 100 3 1 4 VO - Output V oltage - V VO SR - Slew Rate - V/ s 4 2 1 0 -1 -2 -3 VDD = 5 V RL = 10 k CL = 100 pF AV = 1 TA = 25C 3 2 1 -4 -5 0 1 2 3 4 5 6 7 8 9 0 0 1 2 3 4 5 t - Time - s t - Time - s Figure 43. Figure 44. Copyright (c) 2003-2012, Texas Instruments Incorporated 6 7 8 Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 9 23 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 5 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C AV = 1 3 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C AV = -1 2.6 VO - Output Voltage - V 4 VO - Output V oltage - V VO INVERTING SMALL-SIGNAL PULSE RESPONSE 2.65 2 1 0 -1 -2 -3 2.55 2.5 2.45 -4 -5 0 1 2 3 4 5 6 8 2.4 9 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 t - Time - s t - Time - s Figure 45. Figure 46. INVERTING SMALL-SIGNAL PULSE RESPONSE VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 100 2.65 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C AV = 1 50 2.6 V VO O - Output V oltage - V VO - Output V oltage - mV VO 7 0 -50 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C AV = 1 2.55 2.5 2.45 -100 0 0.5 1 2.5 1.5 2 t - Time - s Figure 47. 24 Submit Documentation Feedback 3 3.5 4 2.4 0 0.5 t - Time - s 1 1.5 Figure 48. Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 50 60 VDD = 5 V RL = 10 k CL = 100 pF TA = 25C AV = 1 V Vn nV/Hz Hz n - Equivalent Input Noise V oltage - nV VO - Output V oltage - mV VO 100 0 -50 VDD = 5 V TA = 25C RS = 20 50 40 30 20 10 0 -100 0 0.5 t - Time - s 1 10 1.5 Figure 49. Figure 50. EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY NOISE VOLTAGE OVER A 10 SECOND PERIOD 60 1000 VDD = 5 V TA = 25C RS = 20 50 VDD = 5 V f = 0.1 Hz to 10 Hz TA = 25C 750 500 Noise Voltage - nV Vn - Equivalent Input Noise V oltage - nV Vn nV/Hz Hz 10 k 100 1k f - Frequency - Hz 40 30 20 250 0 -250 -500 10 -750 -1000 0 10 100 1k f - Frequency - Hz Figure 51. Copyright (c) 2003-2012, Texas Instruments Incorporated 10 k 0 2 4 6 8 10 t - Time - s Figure 52. Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 25 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. INTEGRATED NOISE VOLTAGE vs FREQUENCY TOTAL HARMONIC DISTORTION PLUS NOISE vs FREQUENCY THD + N - Total Harmonic Distortion Plus Noise - % V RMS Integrated Noise V oltage - uVRMS 100 Calculated Using Ideal Pass-Band Filter Lower Frequency = 1 Hz TA = 25C 10 1 0.1 1 10 100 1k 10 k 100 k 1 VDD = 5 V TA = 25C RL = 10 k 0.1 AV = 100 0.01 AV = 10 0.001 0.0001 100 1k 10 k f - Frequency - Hz f - Frequency - Hz Figure 53. Figure 54. GAIN-BANDWIDTH PRODUCT vs SUPPLY VOLTAGE GAIN-BANDWIDTH PRODUCT vs FREE-AIR TEMPERATURE 2.5 100 k 3 f = 10 kHz RL = 10 k CL = 100 pF TA = 25C 2.4 VDD = 5 V f = 10 kHz RL = 10 k CL = 100 pF 2.8 Gain-Bandwidth Product - MHz Gain-Bandwidth Product - MHz AV = 1 2.3 2.2 2.1 2.6 2.4 2.2 2 1.8 1.6 2 0 1 6 2 3 4 5 |VDD | - Supply Voltage - V Figure 55. 26 Submit Documentation Feedback 7 8 1.4 -75 -50 -25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 56. Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. PHASE MARGIN vs LOAD CAPACITANCE 75 GAIN MARGIN vs LOAD CAPACITANCE 15 VDD = 5 V TA = 25C VDD = 5 V AV = 1 RL = 10 k TA = 25C Rnull = 100 12 Rnull = 50 Gain Margin - dB om m - Phase Margin 60 45 Rnull = 20 30 9 6 10 k 15 10 k 3 VDD + Rnull Rnull = 0 VI CL 0 10 VDD - Rnull = 10 100 1000 CL - Load Capacitance - pF Figure 57. Copyright (c) 2003-2012, Texas Instruments Incorporated 10000 0 10 100 1000 CL - Load Capacitance - pF 10000 Figure 58. Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 27 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com APPLICATION INFORMATION Macromodel Information Macromodel information provided was derived using Microsim Parts, the model generation software used with Microsim PSpice. The Boyle macromodel (2) and subcircuit in Figure 59 are generated using the TLC227x typical electrical and operating characteristics at TA = 25C. Using this information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases): (2) * * * * * * G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, "Macromodeling of Integrated Circuit Operational Amplifiers", IEEE Journal of Solid-State Circuits, SC-9, 353 (1974). * * * * * * Maximum positive output voltage swing Maximum negative output voltage swing Slew rate Quiescent power dissipation Input bias current Open-loop voltage amplification Unity-gain frequency Common-mode rejection ratio Phase margin DC output resistance AC output resistance Short-circuit output current limit 99 3 VCC + 9 RSS 92 FB J1 DP VC J2 IN + 11 VAD DC 12 - C2 6 DIP 91 + VIP - - + VIN 7 + GCM GA VLIM 8 C1 RD1 R2 - 53 + HLIM - + 10 90 RO2 VB IN - VCC - - + ISS RP 2 1 DIN EGND + - RD2 60 + - 54 - 4 RO1 DE 5 + VE .SUBCKT TLC227x 1 2 3 4 5 C1 11 1214E-12 C2 6 760.00E-12 DC 5 53DX DE 54 5DX DLP 90 91DX DLN 92 90DX DP 4 3DX EGND 99 0POLY (2) (3,0) (4,) 0 .5 .5 FB 99 0POLY (5) VB VC VE VLP VLN 0 + 984.9E3 -1E6 1E6 1E6 -1E6 GA 6 011 12 377.0E-6 GCM 0 6 10 99 134E-9 ISS 3 10DC 216.OE-6 HLIM 90 0VLIM 1K J1 11 210 JX J2 12 110 JX R2 6 9100.OE3 OUT RD1 60 112.653E3 RD2 60 122.653E3 R01 8 550 R02 7 9950 RP 3 44.310E3 RSS 10 99925.9E3 VAD 60 4-.5 VB 9 0DC 0 VC 3 53 DC .78 VE 54 4DC .78 VLIM 7 8DC 0 VLP 91 0DC 1.9 VLN 0 92DC 9.4 .MODEL DX D (IS=800.0E-18) .MODEL JX PJF (IS=1.500E-12BETA=1.316E-3 + VTO=-.270) .ENDS Figure 59. Boyle Macromodels and Subcircuit 28 Submit Documentation Feedback Copyright (c) 2003-2012, Texas Instruments Incorporated Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 TLC2272-Q1 , TLC2272A-Q1 TLC2274-Q1, TLC2274A-Q1 SGLS007E - FEBRUARY 2003 - REVISED JANUARY 2012 www.ti.com REVISION HISTORY Changes from Revision D (March 2009) to Revision E * Page Deleted ESD ratings table .................................................................................................................................................... 3 Copyright (c) 2003-2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1 29 PACKAGE OPTION ADDENDUM www.ti.com 12-Jan-2012 PACKAGING INFORMATION Orderable Device (1) Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp TLC2272AQDRG4Q1 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2272AQDRQ1 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2272AQPWRG4Q1 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2272AQPWRQ1 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2272QDRG4Q1 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2272QDRQ1 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2272QPWRG4Q1 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2272QPWRQ1 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274AQDRG4Q1 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274AQDRQ1 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274AQPWRG4Q1 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274AQPWRQ1 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274QDRG4Q1 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274QDRQ1 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274QPWRG4Q1 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC2274QPWRQ1 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM The marketing status values are defined as follows: Addendum-Page 1 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com 12-Jan-2012 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLC2272-Q1, TLC2272A-Q1, TLC2274-Q1, TLC2274A-Q1 : * Catalog: TLC2272, TLC2272A, TLC2274, TLC2274A * Enhanced Product: TLC2272A-EP, TLC2274-EP, TLC2274A-EP * Military: TLC2272M, TLC2272AM, TLC2274M, TLC2274AM NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Enhanced Product - Supports Defense, Aerospace and Medical Applications * Military - QML certified for Military and Defense Applications Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated