LMS1585A,LMS1587 LMS1585A/LMS1587 5A and 3A Low Dropout Fast Response Regulators Literature Number: SNVS061F LMS1585A/LMS1587 5A and 3A Low Dropout Fast Response Regulators General Description Features The LMS1585A and LMS1587 are low dropout positive regulators with output load current of 5A and 3A respectively. Their low dropout voltage (1.2V) and fast transient response make them an excellent solution for low voltage microprocessor applications. The LMS1585A/87 are available in adjustable versions, which can set the output voltage with only two external resistors. In addition, they are also available in 1.5V and 3.3V fixed voltage versions (Note 9). n n n n n n n n The LMS1585A/87 circuits include a zener trimmed bandgap reference, current limiting and thermal shutdown. The LMS1585A/87 series are available in TO-220 and TO263 packages. Applications n n n n Fast transient response Available in Adjustable, 1.5V, and 3.3V versions Current limiting and thermal protection Commercial temp. range 0C to 125C Industrial temp. range -40C to 125C Line regulation 0.005% (typical) Load regulation 0.05% (typical) Direct replacement for LTTM1585A/87 PentiumTM processor supplies PowerPCTM supplies Other microprocessor supplies Low voltage logic supplies Typical Application 10119701 Connection Diagrams TO-220 TO-263 10119736 Top View 10119735 Top View LT is a registered trademark of Linear Technology Corporation Pentium is a registered trademark of Intel Corporation PowerPC is a registred trademark of IBM (c) 2005 National Semiconductor Corporation DS101197 www.national.com LMS1585A/LMS1587 5A Low Dropout Fast Response Regulators June 2005 LMS1585A/LMS1587 Ordering Information Output Current Package 3A TO-263 Temperature Range 0C to 125C -40C to 125C TO-220 0C to 125C -40C to 125C 5A TO-263 0C to 125C -40C to 125C TO-220 0C to 125C -40C to 125C www.national.com Part Number Transport Media LMS1587CS-ADJ Rails LMS1587CSX-ADJ Tape and Reel LMS1587CS-1.5 Rails LMS1587CSX-1.5 Tape and Reel LMS1587CS-3.3 Rails LMS1587CSX-3.3 Tape and Reel LMS1587IS-ADJ Rails LMS1587ISX-ADJ Tape and Reel LMS1587IS-1.5 Rails LMS1587ISX-1.5 Tape and Reel LMS1587IS-3.3 Rails LMS1587ISX-3.3 Tape and Reel LMS1587CT-ADJ Rails LMS1587CT-1.5 Rails LMS1587CT-3.3 Rails LMS1587IT-ADJ Rails LMS1587IT-1.5 Rails LMS1587IT-3.3 Rails LMS1585ACS-ADJ Rails LMS1585ACSX-ADJ Tape and Reel LMS1585ACS-1.5 Rails LMS1585ACSX-1.5 Tape and Reel LMS1585ACS-3.3 Rails LMS1585ACSX-3.3 Tape and Reel LMS1585AIS-ADJ Rails LMS1585AISX-ADJ Tape and Reel LMS1585AIS-1.5 Rails LMS1585AISX-1.5 Tape and Reel LMS1585AIS-3.3 Rails LMS1585AISX-3.3 Tape and Reel LMS1585ACT-ADJ Rails LMS1585ACT-1.5 Rails LMS1585ACT-3.3 Rails LMS1585AIT-ADJ Rails LMS1585AIT-1.5 Rails LMS1585AIT-3.3 Rails 2 NSC Drawing TS3B T03B TS3B T03B LMS1585A/LMS1587 Simplified Schematic 10119714 3 www.national.com LMS1585A/LMS1587 Absolute Maximum Ratings (Note 1) Power Dissipation (Note 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Storage Temperature Range Maximum Input to Output Voltage (VIN to GND) Internally Limited Junction Temperature (TJ) (Note 2) 150C -65C to 150C Lead Temperature 260C, 10 sec ESD Tolerance (Note 3) 2000V 13V Electrical Characteristics Typicals and limits appearing in normal type apply for TJ = 25C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0C to 125C for commercial grade and -40C to 125C for industrial grade. Symbol VREF VOUT VOUT VOUT Parameter Reference Voltage Output Voltage Line Regulation (Note 6) Load Regulation (Note 6) VIN-VOUT Dropout Voltage www.national.com Min (Note 5) Typ (Note 4) Max (Note 5) Units LMS1585A-ADJ VIN-VOUT = 3V, IOUT = 10mA 10mA IOUT 5A, 1.5V VIN-VOUT 5.75V 1.238 1.225 1.25 1.250 1.262 1.275 V V LMS1587-ADJ 10mA IOUT 3A, 1.5V VIN-VOUT 5.75V 1.225 1.250 1.275 V LMS1585A-1.5 IOUT = 0mA, VIN = 5V 0 IOUT 5A, 3V VIN 7V 1.485 1.470 1.500 1.515 1.530 V V LMS1585A-3.3 IOUT = 0mA, VIN = 5V 0 IOUT 5A, 4.75V VIN 7V 3.267 3.235 3.300 3.300 3.333 3.365 V V LMS1587-1.5 VIN = 5V, IOUT = 0mA, TJ = 25C 0 IOUT 3A, 3V VIN 7V 1.485 1.470 1.500 1.500 1.515 1.530 V V LMS1587-3.3 0 IOUT 3A, 4.75V VIN 7V 3.235 3.300 3.365 V LMS1585A/87-ADJ IOUT = 10mA, 2.75V VIN 7V 0.005 0.2 % LMS1585A/87-3.3 IOUT = 0mA, 4.75V VIN 7V 0.005 0.2 % LMS1585A/87-1.5 IOUT = 0mA, 3V VIN 7V 0.005 0.2 % LMS1585A-ADJ VIN-VOUT = 3V, 10mA IOUT 5A 0.3 0.5 % 0.05 LMS1585A-1.5/LMS1585A-3.3 VIN = 5V, 0 IOUT 5A 0.05 0.05 0.3 0.5 % LMS1587-ADJ VIN-VOUT = 3V, 10mA IOUT 3A 0.05 0.05 0.3 0.5 % LMS1587-1.5/LMS1587-3.3 VIN = 5V, 0 IOUT 3A 0.05 0.05 0.3 0.5 % % LMS1585A-ADJ/LMS1587-ADJ VREF = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 VOUT = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-ADJ VREF = 1%, IOUT = 5A 1.2 1.4 V LMS1585A-1.5/LMS1585A-3.3 VOUT = 1%, IOUT = 5A 1.2 1.4 V Conditions 4 (Continued) Typicals and limits appearing in normal type apply for TJ = 25C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0C to 125C for commercial grade and -40C to 125C for industrial grade. Symbol ILIMIT Min (Note 5) Typ (Note 4) LMS1585A-ADJ/LMS1585A-3.3/LMS1585A-1.5 VIN-VOUT = 5.5V 5.0 6.6 A LMS1587-ADJ/LMS1587-3.3/LMS1587-1.5 VIN-VOUT = 5.5V 3.1 4.3 A Parameter Current Limit Conditions Max (Note 5) Units Minimum Load Current (Note 7) LMS1585A/87-ADJ 1.5V VIN-VOUT 5.75V 2.0 10.0 mA Quiescent Current LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 VIN = 5V 7.0 13.0 mA Thermal Regulation TA = 25C, 30ms Pulse Ripple Rejection LMS1585A-ADJ fRIPPLE = 120Hz, VIN-VOUT = 3V, IOUT = 5A, COUT = 25F Tantalum LMS1585A-1.5 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 5A, VIN = 4.5V 72 dB 72 dB 72 dB LMS1587-ADJ fRIPPLE = 120Hz, VIN-VOUT = 3V, IOUT = 3A COUT = 25F Tantalum 72 dB 72 dB 72 dB LMS1587-3.3 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 3A, VIN = 6.3V Adjust Pin Current Adjust Pin Current %/W LMS1585A-3.3 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 5A, VIN = 6.3V LMS1587-1.5 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 3A, VIN = 4.5V 60 0.003 60 55 10mA IOUT IFULLLOAD, 1.5V VIN-VOUT 5.75V (Note 8) Temperature Stability 120 A 0.2 A 0.5 % Long Term Stability TA = 125C, 1000Hrs 0.03 % RMS Output Noise (% of VOUT) 10Hz f 10kHz 0.003 % Thermal Resistance Junction-to-Case 3-Lead TO-263: Control/Output Section 3-Lead TO-220: Control/Output Section 0.65/2.7 0.65/2.7 C/W C/W Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. Note 2: The maximum power dissipation is a function of TJ(max) , JA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)-T A)/JA. All numbers apply for packages soldered directly into a PC board. Note 3: For testing purposes, ESD was applied using human body model, 1.5k in series with 100pF. Note 4: Typical Values represent the most likely parametric norm. Note 5: All limits are guaranteed by testing or statistical analysis. Note 6: Load and line regulation are measured at constant junction temperature, and are guaranteed up to the maximum power dissipation of 30W. Power dissipation is determined by the input/output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. Note 7: The minimum output current required to maintain regulation. Note 8: IFULLLOAD is 5A for LMS1585A and 3A for LMS1587. Note 9: Consult factory for other fixed voltage options. 5 www.national.com LMS1585A/LMS1587 Electrical Characteristics LMS1585A/LMS1587 Application Note OUTPUT VOLTAGE The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal. As shown in Figure 1, this voltage is applied across resistor R1 to generate a constant current I1. This constant current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the desired output voltage. The current IADJ from the adjustment terminal introduces an output error. But since it is small (120A max), it becomes negligible when R1 is in the 100 range. For fixed voltage devices, R1 and R2 are integrated inside the devices. 10119772 FIGURE 1. Basic Adjustable Regulator www.national.com 6 LMS1585A/LMS1587 Physical Dimensions inches (millimeters) unless otherwise noted 3-Pin TO-263 NS Package Number TS3B 3-Pin TO-220 NS Package Number T03B 7 www.national.com LMS1585A/LMS1587 5A Low Dropout Fast Response Regulators Notes National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ``Banned Substances'' as defined in CSP-9-111S2. Leadfree products are RoHS compliant. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated