A-98
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A
Pushbutton
NE-18 Series
Mains / Power Switches
Features/Benefits
•Chassis or panel mount
•Various buttons
•Various contact configurations
•RoHS compliant
Typical Applications
•Mains/power switching
•Consumer electronics
•Audio equipment
•Digital products
Specifications
POWER CONTACT:
SWITCHING POWER MAX. AC/DC: NE18: 1500/100 W,
NE18CTII: 1000/100 W; AC (Inductive cos w =0.6): NE18: 900W,
NE18CTII: 600W.
SWITCHING VOLTAGE MAX. AC/DC: 250/100V
SWITCHING CURRENT MAX. AC/DC
AC (Inductive cos w =0.6): NE18: 6 A2)4)/1 A, NE18CTII: 4 A2)/1 A
INRUSH CURRENT MAX. AC1): NE18: 36 A, NE18CTII: 64 A
DIELECTRIC STRENGTH (50 Hz, 1 min.): 2000 V
OPERATING LIFE AT MAX. LOAD AND AT MAX. INRUSH
CURRENT: ^104operations5)
CONTACT RESISTANCE: Initial: 50mΩ; After 104operations: 70mΩ.
INSULATION RESISTANCE: ^1012 Ωchassis – nearest contact;
^1012 Ωmains contact – mains contact; ^1012 Ωmains contact –
mains contact after 104operations.
LOW VOLTAGE CONTACT:
SWITCHING POWER MAX.: 12W
SWITCHING VOLTAGE MAX.: 24V
SWITCHING CURRENT MAX.: 0.5A
TOTAL TRAVEL: 4.7mm (.185 inch)
LATCHING TRAVEL: 3.3mm (.130 inch)
OPERATING FORCE: Without auxiliary low voltage contacts:
NE18: 7N (700 grams); NE18CTII: 9.5N (950 grams).
With auxiliary low voltage contacts: NE18: 8N (800 grams);
NE18CTII: 11N (1100 grams).
SEALING: Dust proof.
Materials
HOUSING, ACTUATOR & TERMINAL BOARD: Thermoplastic
polyester (UL 94V-0).
MOVABLE CONTACT: Silver nickel alloy, silver plated.
FIXED CONTACTS: Silver nickel alloy, silver plated.
COMMON CONTACTS & TERMINALS: Copper alloy, silver plated.
RETURN SPRING: Music wire.
NOTE: All models arer RoHS compliant and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-99 thru A-106. For additional options not shown in catalog, consult Customer Service Center.
If requesting only a switch, select the switch as noted below. Buttons are sold separately.
Designation
NE18 NE1B
ZNE18 Cental mounted NE1B
Single Station Chassis
01 With .094 mounting holes
(NONE) No chassis
02 With 4-40 tapped mounting holes
03 Special chassis (consult factory)
Dress nut*
*Central mounted
ZNE18 series only
(NONE) No dress nut
BBlack
CChrome
Mechanical Function
OA Momentary
EE Alternate (push-push)
Contact Arrangement
NE18 code # - see list
A-99
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Pushbutton
A
Third Angle
Projection
NE-18 Series
Mains / Power Switches
Style
F01 FMR
F02 FG*
F12 FSC
F13 FSD
F14 FU12
F15 FSB
F16 FE
F19 FA
F21 F001
Button Color
01 Black
02 White
03 Red
04 Light gray
Order Code - Buttons
Solid Buttons Mechanical Indicator Buttons
Style
F01 FA100
F02 FA101
F07 FA120
F08 FA2O1
F11 FA200*
Shell Color
01 Black
Out Position Color
01 Black
In Position Color
02 White
06 Yellow
07 Blue
08 Green
12 Orange
*Button options for central mounting configurations,
use ‘FG’ for central mount with chrome dress nut,
use ‘FA200’ for central mount with black dress nut.
BUTTON REMOVAL
A button of a push-push switch should only be
removed in the “OFF” non-latching position.
0.394
(10)
0.492
(12,5)
(A)
(R) (R)
P1P2
(A)
0.394
(10)
0.494
(12,55)
0.236
(6)
1,5±0,1
NE18 2U
0.236
(6)
DESIGNATION & SWITCHES WITH STANDARD OPTIONS
NE1838EE
0.7
(17,8)
1.09
(27,8)
0.406
(21,4)
0.335
(8,5)
0.13
(3,3)
0.394
(10)
0.494
(12,5)
0.583
(14,8)
0.709
(18) 0.315
(8)
0.197
(5)
A-100
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A
Pushbutton
Third Angle
Projection
NE-18 Series
Mains / Power Switches
DESIGNATION & SWITCHES WITH STANDARD OPTIONS
NE1848EE
NE1839EE
PC MOUNTING
DESIGNATION & SWITCHES WITH STANDARD OPTIONS
A-101
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Pushbutton
A
NE-18 Series
Mains / Power Switches
Third Angle
Projection
ZNE1838EECF0201
PC MOUNTING
A-102
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A
Pushbutton
Third Angle
Projection
NE-18 Series
Mains / Power Switches
CONTACT ARRANGEMENT
MECHANICAL FUNCTION
Momentary
Alternate (push-push)
OA
EE
FUNCTIONOPTION CODE
37
NE18 — 2AX DPST
38
NE18 — 2UX DPDT
51
2U + NE18 — 2AX DPST*
52 (4A/64)
NE18CTII — 2AX DPST
39
2U + NE18 — 2UX DPDT*
41
NE18 — 2AP DPST
42
NE18 — 2UP DPDT
43
NE18 — 2AW DPST
44
NE18 — 2UW DPDT
45
NE18 — 2ASX DPST
ELECTRICAL
CIRCUITSTYLE
OPTION CODE
Contact capacity
and availability
46
NE18 — 2USX DPDT
47
NE18 — 2ASP DPST
48
NE18 — 2USP DPDT
49
NE18 — 2ASW DPST
50
NE18 — 2USW DPDT
53 (4A/64)
2U + NE18CTII — 2AX DPST
54
2U + NE18 — 2AW DPST
55
2U + NE18 — 2AP DPST
56
2U + NE18 — 2UW DPDT
57
2U + NE18 — 2UP DPDT
ELECTRICAL
CIRCUITSTYLE
OPTION CODE
Contact capacity
and availability
*2U + Denotes auxiliary set of low current contacts DPDT
2A = DPST
2U = DPDT
S = Snap-in mounting
X = Solder lug/PC pins
W = Solder lugs only
P = PC pins only
NOTES
1. Contact plating is silver on all Power Switches.
2. The electrical function is Break Before Make (BBM) on all Power Switches.
3. The terminals will be epoxy sealed.
1) A = make contact, R = break contact, U = changeover contact, m= VDE sign for switches with a contact spacing (air gap) < 3mm (.118 inch) according to
VDE 0630/CEE 24.
2) With 2A mains contacts: Mounting only by PC pins is not sufficient.
3) BSI only for 2U mains contacts.
VDE, ULII
> 3mm
(.118 inch)
2U
2A
2
NE18CTII
VDE, ULI
> 3mm (m)
(.118 inch)
2U
2A
2
2U
NE18
VDE, ULII
> 3mm
(.118 inch)
2U
2A
2
NE18
APPROVALS
PROTECTION CLASS
(CEE 24)CONTACT SPACING
POSSIBLE CONTACT ARRANGEMENT
POWER CONTACTS
1
AUXILIARY CONTACTS
TYPE
A-103
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Pushbutton
A
Third Angle
Projection
NE-18 Series
Mains / Power Switches
SINGLE STATION CHASSIS
DRESS NUT
PANEL CUTOUT
PANEL CUTOUT
03
SPECIAL CHASSIS (CONSULT FACTORY)
02
WITH 4-40 TAPPED MOUNTING HOLES
01
WITH .094 MOUNTING HOLES
(NONE)
NO CHASSIS
C
CHROME
B
BLACK
(NONE)
NO DRESS NUT
NOTE: Available with ZNE18 designation and
FG button.
NOTE: Available with ZNE18 designation and FA200 buttons.
A-104
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A
Pushbutton
Third Angle
Projection
NE-18 Series
Mains / Power Switches
SOLID BUTTON
F19
FA
F16
FE
F14
FU12
F13
FSD
F12
FSC
F02
FG
F01
FMR
F15
FSB
STYLE
01
BLACK
02
WHITE
03
RED
04
LT. GRAY
COLOROPTION CODE
A-105
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Pushbutton
A
Third Angle
Projection
NE-18 Series
Mains / Power Switches
SOLID BUTTON
MECHANICAL BUTTON
F01
FA100
F21
F001
F02
FA101
01
BLACK
02
WHITE
03
RED
04
LT. GRAY
BLACK/CHROME
09
(F03,F06 & F07
buttons only
COLOR
OPTION CODE
STYLE
COLOR
SHELL COLOR IN POSITION COLOR
STYLE OUT POSITION COLOR
STYLE
STYLE
A-106
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A
Pushbutton
Third Angle
Projection
NE-18 Series
Mains / Power Switches
MECHANICAL BUTTON
STYLE
SHELL COLOR
OUT POSITION COLOR
IN POSITION COLOR
01
BLACK
01
BLACK
F08
FA201
F11
FA200
STYLE
SHELL COLOR
OUT POSITION COLOR
IN POSITION COLOR
02
WHITE
06
YELLOW
07
BLUE
08
GREEN
12
ORANGE
COLOROPTION CODE
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
C&K Components:
NE18/2UOAX NE1839EE NE1845EE NE18/2AOAX F02-01 ZNE18 FA200 BK GN 2U EE ZNE18 FA200 BK GN
2U EE L NE18 2A 2U EE 6AMP NE18 2A EE 6AMP NE18 2A EE L 6AMP NE18 2A EE P 6AMP NE18 2A EE SN
6AMP NE18 2A EE SN L 6AMP NE18 2A EE SN P 6AMP NE18 2U 2U EE 6AMP NE18 2U EE L 6AMP NE18 2U EE
P 6AMP NE18 2U EE SN 6AMP NE18 2U EE SN P 6AMP NE18CTII 2A EE 4AMP NE18CTII 2A EE SN 4AMP
NE18CTII 2A EE SN P 4AMP NE182UEE6AMP NE182REESN NE182A2UEEP6AMP NE182A2UEEL6AMP
NE18CTII2AEEP4AMP ZNE18FA200BKGN2U2UEEP ZNE18FA200BKGN2U2UEEL ZNE18FA200BKGN2U2UEE
NE1848EE F1401 F1601 F1501 F1503 ZNE18 FA200 BK GN 2A 2U EE