DC/DC Product Specification - Half brick fully regulated DCDC converter. Rev 04/09/2012 AGH100 series Page 1 of 2 AGH100-48S3V3 Half brick Input voltage: 36-75V Single Output: 3.3V Rated power: 82.5W Product Description The AGH100-48S3V3 is the latest high efficiency half brick. It operates from a wide input range of 36Vdc to 75Vdc and provides a regulated output voltage of 3.3Vdc. The output is rated to a power level up to 82.5Watts .Its protection features include Non latching OCP , OTP and OVP. It also has an enable pin on the primary side of the converter. The unit is a baseplate design that is optimised for either contact-cooled applications or forced airflow applications. Special Features -2:1 Wide input range -Optimised for High density, small space applications -Low ripple and noise -Fixed switching frequency -High efficiency -High capacitive load capability -Basic insulation system -Pre-bias start-up capability - Openframe structure with Baseplate option Specifications Feature Output power: Super high efficiency: Functions: Isolation: Safety UL: TUV/CE: Input specification Input range Input Surge Control specification Enable Output specification Output Voltage Trim range Output Current Ripple and noise Regulation Switching Frequency Isolation Voltage Transient response. 82.5W 92.4%(3.3V) Remote control, trim function, Sense; Input LVP, output OVP and OCP, OTP, Pre-bias Open frame structure with base plate option. Basic Insulation UL60950 IEC/EN60950 36Vdc to 75Vdc 100V for 100mSec TTL compatible Positive or Negative enable 3.3Vdc. +10% to -20% Vout 25A 45mV pk-pk Load regulation = 16.5mV, Line regulation = 6.6mV Fixed switching frequency 270Khz 2000Vdc 80mV deviation 80S recovery (25% deviation from 50% Iout, 0.1A/uS) Typ. Safety Environmental Specification -UL, cUL: UL60950 -TUV/CE: IEC/EN60950 Storage Temperature Ambient operating temp MTBF at 25degC OTP -55 to +125 deg C -40 to +85 deg C 2 Million hours (Vin 48V, Io=20A) 118 deg C DC/DC Product Specification - Half brick fully regulated DCDC converter. Mechanical (open frame) Rev 04/09/2012 AGH100 series Page 2 of 2 57.9 [2.280] 3 6 7 Bottom view 2 8 1 9 50 8 [2 000] 5 35.56 [1.400] 4 15.24 [0.600] 35.56 [1.400] 7.62 [0.300] 50.8 [2.000] 61.0[2.402] 48.26 [1.900] 4-4.3 L 10.0 [0.394] Side view 7-1.00.1 7-2.00.1 Load board Unit: mm[inch] 2-2.00.1 Pin Assignments Pin # Function 1 +V in 2 Enable 3 Case 4 -V in 5 -V out 6 -Sense 7 Trim 8 +Sense 9 +V out Bottom view: pin on upside Tolerance: X.Xmm0.5mm[X.X in.0.02in.] X.XXmm0.25mm[X.XX in.0.01in.] Ordering information Input Output Output Efficiency voltage voltage current 48V 3.3V 25A 92.4% 48V 3.3V 25A 92.4% 48V 3.3V 25A 92.4% 48V 3.3V 25A 92.4% Notes - Standard converter is Negative enable - `B' = Baseplate option - `-4' = 4.8mm pin length. - `-P' = Positive remote control , - `-L' = RoHS-6 compliant. Part number AGH100-48S3V3P-4L AGH100-48S3V3-4L AGH100-48S3V3PB-4L AGH100-48S3V3B-4L Notes, 1\ 20Mhz bandwidth. External 10uF tantalum capacitor placed across +Vout and -Vout; 33 uF e-cap or equivalent placed across +Vin and -Vin. 2\ Efficiency measurements taken at full load and nominal line and Tamb = 25degC 3\ All specifications taken at nominal line, full load and Tamb = 25degC unless otherwise noted 4\ Mechanical dimensions are for reference only. Dimensions are in MM. Mechanical tolerance = +/0.5mmm 5\ Technical reference notes should be consulted for detailed information when available. 6\ All specifications subject to change without notice 7\ Warranty 2 years 8\ The through-hole terminated modules aree intended for wave-soldering process - special request for other manufacturing processes to be made to Emerson Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Artesyn Embedded Technologies: AGH100-48S3V3B-4L AGH100-48S3V3-4L AGH100-48S3V3PB-4L AGH100-48S3V3P-4L