This product complies with the RoHS Directive (EU 2002/95/EC). MTM76123 Silicon P-channel MOS FET For load switch circuits For switching circuits Package Overview MTM76123 is the low on-resistance P-channel MOS FET designed for load switch circuits. Features Low drain-source ON resistance: RDS(on) typ. = 36 mW (VGS = -4.0 V) Small size surface mounting package: WSMini6-F1-B (2.1 mm x 2.0 mm x 0.7 mm) Low drive voltage: 2.5 V drive Contributes to miniaturization of sets, reduction of component count. Eco-friendly Halogen-free package Code WSMini6-F1-B Pin Name 1: Drain 2: Drain 3: Gate 4: Source 5: Drain 6: Drain Marking Symbol: 9C Internal Connection Packaging Embossed type (Thermo-compression sealing): 3000 pcs / reel (standard) (D) 6 (D) 5 (S) 4 1 (D) 2 (D) 3 (G) Absolute Maximum Ratings Ta = 25C Parameter Symbol Rating Unit Drain-source surrender voltage VDSS -20 V Gate-source surrender voltage VGSS 10 V Drain current ID -3.0 A Peak drain current *1 IDP -16 A Power dissipation *2 PD 700 mW Channel temperature Tch 150 C Storage temperature Tstg -55 to +150 C Note) *1: Measuring on ceramic substrate at 40 mm x 38 mm x 0.1 mm Absolute maximum rating without heat sink for PD is 150 mA *2: Pulse width 10 s, Duty Cycle 1% Publication date: March 2011 Ver. CED 1 This product complies with the RoHS Directive (EU 2002/95/EC). MTM76123 Electrical Characteristics Ta = 25C3C Parameter Symbol Conditions Min Typ Max Drain-source surrender voltage VDSS ID = -1 mA, VGS = 0 Drain-source cutoff current IDSS VDS = -20 V, VGS = 0 -1.0 mA Gate-source cutoff current IGSS VGS = 8 V, VDS = 0 10 mA Gate threshold voltage VTH ID = -1.0 mA, VDS = -10 V - 0.85 -1.3 V ID = -1 A, VGS = -4.0 V 36 55 ID = - 0.5 A, VGS = -2.5 V 42 70 Drain-source ON resistance *1 RDS(on) Forward transfer admittance *1 Yfs Short-circuit input capacitance (Common source) Ciss Short-circuit output capacitance (Common source) Coss Reverse transfer capacitance (Common source) Crss Turn-on time *2 ton Turn-off time *2 toff -20 Unit V - 0.4 ID = -1.0 A, VDS = -10 V, f = 1 MHz 3.5 S 1 000 pF 100 pF 100 pF VDD = -10 V, VGS = 0 V to -4 V, ID = -1 A 30 ns VDD = -10 V, VGS = -4 V to 0 V, ID = -1 A 250 ns VDS = -10 V, VGS = 0, f = 1 MHz Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *1: Pulse measurement: Pulse width < 300 ms, Duty Cycle < 2.0% *2: ton , toff measurement circuit 0V -4 V VIN PW = 10 s Duty Cycle 1% VIN G VCC = -10 V ID = 1 A RL = 10 D VIN 10% 90% VOUT 10% VOUT 50 90% S td(on) 2 mW Ver. CED td(off) This product complies with the RoHS Directive (EU 2002/95/EC). MTM76123 WSMini6-F1-B Unit: mm 2.00 0.10 +0.05 6-0.20 -0.02 +0.05 4 1 2 3 (0.65) (0.65) 0.13 -0.03 (0.20) 5 2.10 0.10 5 1.70 0.10 6 0.70 0.10 1.30 0.10 0 to 0.10 (0.15) 5 4 Ver. CED Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202